AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

321-6780 WIRING GP-LUBRICATION S/N SHH323-UP PRELUBE. DELUXE PART OF 321-6778 PRELUBRICATION AR-ENGINE AN ATTACHMENT 789D


ELECTRICAL AND STARTING SYSTEM
WIRING GP

TRUCK 789D TRUCK SHH
 789D XQ Off-Highway Truck SHH00001-UP (MACHINE) POWERED BY 3516 Engine SEBP6124 789D SHH   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-LUBRICATION
321-6780 WIRING GP-LUBRICATION
WIRING GP-LUBRICATION
321-6780 WIRING GP-LUBRICATION
WIRING GP-LUBRICATION
321-6780 WIRING GP-LUBRICATION
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
 

#SEBP61240570
 

321-6780: WIRING GP-LUBRICATION

321-6780 WIRING GP-LUBRICATION
S/N SHH323-UP
PRELUBE. DELUXE
PART OF 321-6778 PRELUBRICATION AR-ENGINE
AN ATTACHMENT
i07621851 SEBP6124
3216780 WIRING GP-LUBRICATION Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-7517 [1] BRACKET AS  
  2W-7940 [1] BRACKET  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
2. 140-0860 [1] STRAP AS-GROUND  
3. 243-5821 C [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
4. 267-2744 [1] HOLDER AS-FUSE  
  267-2746 [1] COVER AS  
5. 326-8116 [1] FUSE (300-AMPERE)(PRELUBRICATION PUMP)  
6. 337-9078 Y [1] SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(PRELUBRICATION PUMP RELAY)  
7. 354-7480 [1] CABLE AS  
  3L-6513 [1] TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)  
  8C-3056 E CABLE (2-GA, RED)(42-CM)  
  308-8161 [2] COVER-TERMINAL  
  311-6185 [1] TERMINAL AS  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
8. 446-9281 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 449-3238 C [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(51-CM)  
  299-6082 [1] COVER-TERMINAL (RED)  
  308-8161 [1] COVER-TERMINAL  
  291-6819 [1] TERMINAL AS-RING  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  311-6185 [1] TERMINAL AS  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
10. 091-9035 [1] SPACER (11X25X20-MM THK)  
11. 177-4562 C [6] GROMMET  
12. 204-2281 [1] STRAP-CABLE  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 5C-9553 M [2] BOLT (M6X1X16-MM)  
15. 7K-1181 C [4] STRAP-CABLE  
16. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
17. 8T-1889 C [6] CLIP (SLOT)  
18. 8T-1890 C [6] CLIP (TAB)  
19. 8T-4121 C [3] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4198 CM [1] BOLT (M10X1.5X100-MM)  
21. 8T-4171 M [4] BOLT (M6X1X12-MM)  
22. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
23. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
24. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
25. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 264-3617 [2] LOCKWASHER  
27. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
28. 479-2171 C [4] BOLT AS  
29. 136-4992 C [1] SPACER (11X20X40-MM THK)  
30. 259-7140 CM [1] STUD-TAPERLOCK (M10X1.5X80-MM)  
31. 316-0487 C [1] SPACER (11X25X70-MM THK)  
32. 344-5675 CM [1] NUT (M10X1.5-THD)  
33. 550-1856 C [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(95-CM)  
  311-6185 [2] TERMINAL AS  
    (EACH INCLUDES)
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240571
 

288-5655: WIRING GP-MACHINE

288-5655 WIRING GP-MACHINE -REAR
S/N SHH1-301
CHASSIS
PART OF 331-6400 CHASSIS AR
i04477813 SEBP6124
2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [12] STRAP-CABLE  
2. 4M-7146 [1] STRAP AS-GROUND  
3. 7K-1181 [45] STRAP-CABLE  
4. 8R-0721 [3] SPACER (11X16X35-MM THK)  
5. 113-4339 [2] SPACER (10.5X18X21-MM THK)  
6. 142-1657 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 144-4138 [1] SUPPORT GP-LIGHT (ROD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  7X-7915 [1] ROD END  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-6431 [1] ROD END  
  144-4139 [1] ROD  
8. 192-8959 [1] BRACKET AS  
9. 192-8961 [1] BRACKET  
10. 198-4271 [1] LEVER  
11. 213-9100 [1] ALARM AS (BACKUP)  
12. 229-3177 [1] PLATE AS  
  6V-6716 [2] RIVET-TRUSS HEAD  
  109-1645 [1] CLIP  
13. 232-6136 [2] LAMP GP-SIGNAL (24-VOLT)(STOP, TAIL, TURN)  
    (EACH INCLUDES)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
14. 248-4760 [2] PLATE  
15. 272-6641 Y [2] LAMP GP-FLOOD (24-VOLT)  
16. 289-9520 [1] BRACKET AS  
17. 336-6687 [2] CAP-PROTECTIVE (FEMALE)  
18. 347-1858 Y [1] HARNESS AS-TRANSMISSION  
19. 347-1860 Y [1] HARNESS AS-SENSOR (FUEL LEVEL)  
20. 347-1862 Y [1] HARNESS AS-REAR CHASSIS  
21. 347-1865 Y [1] HARNESS AS-ENGINE  
22. 347-1866 Y [1] HARNESS AS-FRONT CHASSIS  
23. 351-6021 [2] PLATE  
24. 352-4203 [2] STRAP-CABLE  
25. 359-9192 [1] PLATE  
26. 384-5347 [1] HARNESS AS-LIGHTING  
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [2] STRAP-CABLE  
  6T-0465 [1] COVER-TERMINAL (BLACK)  
  8T-8729 [14] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [43] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [18] PLUG-SEAL  
  9W-0844 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  009-8708 [2] BOOT-TERMINAL  
  114-8843 E SLEEVE-PLASTIC (330-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(65-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM)  
  2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  2L-8077 [2] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [4] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  1P-0810 B TAPE-ELECTRICAL  
  174-3016 [1] PLUG AS-CONNECTOR (3-PIN)  
  189-3158 [1] SUPPRESSOR-ARC  
  230-5010 [4] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
27. 033-8248 [5] CLIP (LOOP)  
28. 067-3045 [1] CLIP (LOOP)  
29. 105-3487 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
30. 109-3001 M [11] STUD-TAPERLOCK (M10X1.5X65-MM)  
31. 118-7226 Y [1] SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)  
31A. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, LH)  
31B. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, RH)  
32. 124-9633 [2] CLIP (SLOT)  
33. 130-5300 [25] CLIP  
34. 130-5301 [3] CLIP  
35. 144-8344 [2] SPACER (11X19X20-MM THK)  
36. 173-2090 [4] SPACER (11X20X15-MM THK)  
37. 174-5907 [3] CLIP (LOOP)  
38. 186-0357 [13] CLIP  
39. 1S-0994 [5] CLIP (LOOP)  
40. 214-7568 [3] SEAL-O-RING  
41. 266-2338 [1] SENSOR GP-POSITION (ROTARY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9339 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
42. 274-4478 [1] CABLE AS (VIDEO, 11-M)  
43. 297-1546 [1] CLIP  
44. 2Y-3812 [6] CLIP  
45. 305-0660 [2] SPACER (10.5X15X15-MM THK)  
46. 3S-8664 [1] CLIP (LOOP)  
47. 3S-8665 [1] CLIP (LOOP)  
48. 4D-7388 [14] CLIP (LOOP)  
49. 4D-7735 [5] CLIP  
50. 4D-7794 [30] CLIP  
51. 4P-7428 [1] CLIP (LADDER)  
52. 4P-7581 [2] CLIP (LADDER)  
53. 4S-1962 [11] CLIP (LOOP)  
54. 5C-2890 M [6] NUT (M6X1-THD)  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-8312 M [4] NUT (M4X0.7-THD)  
57. 5K-3294 [2] CLIP (SLOT)  
58. 5K-5338 [18] CLIP (LOOP)  
59. 5P-7470 [2] CLIP (SLOT)  
60. 5P-7471 [2] CLIP (TAB)  
61. 5P-8182 [2] GROMMET (46-MM ID)  
62. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
63. 6D-4244 [5] CLIP (LOOP)  
64. 6D-4246 [4] CLIP (LOOP)  
65. 6V-3822 M [4] BOLT (M10X1.5X35-MM)  
66. 7C-4354 [3] CLIP  
67. 7X-2541 M [2] BOLT (M8X1.25X140-MM)  
68. 8C-9660 [8] WASHER (4.6X7.9X0.8-MM THK)  
69. 8M-2770 [6] CLIP (LOOP)  
70. 8M-2773 [6] CLIP (LOOP)  
71. 8T-0338 M [5] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
72. 8T-4121 [114] WASHER-HARD (11X21X2.5-MM THK)  
73. 8T-4133 M [19] NUT (M10X1.5-THD)  
74. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
75. 8T-4137 M [70] BOLT (M10X1.5X20-MM)  
76. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
77. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
78. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
79. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
80. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
81. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
82. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
83. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
84. 8T-6466 M [3] BOLT (M10X1.5X60-MM)  
85. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
86. 8T-9405 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
87. 9C-9458 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
88. 9G-7101 [1] SPACER (11X20X30-MM THK)  
89. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
90. 9M-4972 [4] CLIP (LOOP)  
91. 9M-8406 [6] CLIP (LOOP)  
92. 9R-5383 [1] BOSS  
   
    AVAILABLE REPAIR KIT(S):
  106-4155 H [1] KIT-RETAINING BOLT  
    (INCLUDES BOLT, RING, & SEALS)
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES PART(S) MARKED H
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240572
 

288-5655: WIRING GP-MACHINE

288-5655 WIRING GP-MACHINE -REAR
S/N SHH302-319
CHASSIS
PART OF 331-6400 CHASSIS AR
i04879929 SEBP6124
2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 336-6692 [1] CAP-PROTECTIVE (MALE)  
2. 4M-7146 [1] STRAP AS-GROUND  
3. 7K-1181 [57] STRAP-CABLE  
4. 8R-0721 [3] SPACER (11X16X35-MM THK)  
6. 142-1657 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 144-4138 [1] SUPPORT GP-LIGHT (ROD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  7X-7915 [1] ROD END  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-6431 [1] ROD END  
  144-4139 [1] ROD  
8. 192-8959 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
9. 192-8961 [1] BRACKET  
10. 198-4271 [1] LEVER  
11. 213-9100 [1] ALARM AS (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1813 E SLEEVE (29-CM)  
12. 229-3177 [1] PLATE AS  
  6V-6716 [2] RIVET-TRUSS HEAD  
  109-1645 [1] CLIP  
13. 232-6136 [2] LAMP GP-SIGNAL (24-VOLT)(STOP, TAIL, TURN)  
    (EACH INCLUDES)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 20-GA)  
14. 248-4760 [2] PLATE  
15. 272-6641 Y [2] LAMP GP-FLOOD (24-VOLT)  
16. 289-9520 [1] BRACKET AS  
17. 336-6687 [1] CAP-PROTECTIVE (FEMALE)  
18. 347-1858 Y [1] HARNESS AS-TRANSMISSION  
19. 347-1860 Y [1] HARNESS AS-SENSOR (FUEL LEVEL)  
20. 347-1862 Y [1] HARNESS AS-REAR CHASSIS  
21. 347-1865 Y [1] HARNESS AS-ENGINE  
22. 347-1866 Y [1] HARNESS AS-FRONT CHASSIS  
23. 351-6021 [2] PLATE  
24. 352-4203 [2] STRAP-CABLE  
25. 359-9192 [1] PLATE  
26. 423-9677 Y [1] HARNESS AS-LIGHTING  
27. 033-8248 [5] CLIP (LOOP)  
28. 067-3045 [1] CLIP (LOOP)  
29. 105-3487 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
30. 231-0336 M [9] STUD-TAPERLOCK (M10X1.5X70-MM)  
31. 118-7226 Y [1] SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)  
31A. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, LH)  
31B. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, RH)  
32. 124-9633 [2] CLIP (SLOT)  
33. 130-5300 C [23] CLIP  
34. 130-5301 [3] CLIP  
35. 144-8344 [2] SPACER (11X19X20-MM THK)  
36. 173-2090 [4] SPACER (11X20X15-MM THK)  
37. 174-5907 [3] CLIP (LOOP)  
38. 186-0357 [13] CLIP  
39. 1S-0994 [5] CLIP (LOOP)  
40. 214-7568 [3] SEAL-O-RING  
41. 266-2338 [1] SENSOR GP-POSITION (ROTARY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
42. 274-4478 [1] CABLE AS (VIDEO, 11-M)  
43. 297-1546 [1] CLIP  
44. 2Y-3812 [6] CLIP  
45. 305-0660 [2] SPACER (10.5X15X15-MM THK)  
46. 3S-8664 [1] CLIP (LOOP)  
47. 3S-8665 [1] CLIP (LOOP)  
48. 4D-7388 [14] CLIP (LOOP)  
49. 4D-7735 [4] CLIP  
50. 4D-7794 [30] CLIP  
51. 4P-7428 [1] CLIP (LADDER)  
52. 4P-7581 [2] CLIP (LADDER)  
53. 4S-1962 [11] CLIP (LOOP)  
54. 5C-2890 M [6] NUT (M6X1-THD)  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-8312 M [4] NUT (M4X0.7-THD)  
57. 5K-3294 [2] CLIP (SLOT)  
58. 5K-5338 [18] CLIP (LOOP)  
59. 5P-7470 [2] CLIP (SLOT)  
60. 5P-7471 [2] CLIP (TAB)  
61. 5P-8182 [2] GROMMET (46-MM ID)  
63. 6D-4244 [5] CLIP (LOOP)  
64. 6D-4246 [4] CLIP (LOOP)  
66. 7C-4354 [3] CLIP  
68. 8C-9660 [8] WASHER (4.6X7.9X0.8-MM THK)  
69. 8M-2770 [7] CLIP (LOOP)  
70. 8M-2773 [6] CLIP (LOOP)  
71. 107-0269 M [5] BOLT-HEAD (M8X1.25X50-MM)  
72. 8T-4121 [114] WASHER-HARD (11X21X2.5-MM THK)  
73. 344-5675 M [19] NUT (M10X1.5-THD)  
74. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
75. 8T-4137 M [70] BOLT (M10X1.5X20-MM)  
76. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
77. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
78. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
79. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
80. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
81. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
83. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
84. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
85. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
86. 162-2165 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
87. 9C-9458 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
88. 302-3908 [1] SPACER (11X20X30-MM THK)  
89. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
90. 9M-4972 [4] CLIP (LOOP)  
91. 9M-8406 [2] CLIP (LOOP)  
92. 9R-5383 [1] BOSS  
93. 172-6833 [1] CLIP (LOOP)  
94. 259-7140 M [2] STUD-TAPERLOCK (M10X1.5X80-MM)  
95. 6D-3479 [3] CLIP (LOOP)  
   
    AVAILABLE REPAIR KIT(S):
  106-4155 H [1] KIT-RETAINING BOLT  
    (INCLUDES BOLT, RING, & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES PART(S) MARKED H
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240573
 

288-5655: WIRING GP-MACHINE

288-5655 WIRING GP-MACHINE -REAR
S/N SHH1-319
CHASSIS
PART OF 331-6400 CHASSIS AR
i05765167 SEBP6124
2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 336-6692 [1] CAP-PROTECTIVE (MALE)  
2. 4M-7146 [1] STRAP AS-GROUND  
3. 7K-1181 [55] STRAP-CABLE  
4. 8R-0721 [3] SPACER (11X16X35-MM THK)  
6. 142-1657 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 144-4138 [1] SUPPORT GP-LIGHT (ROD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  7X-7915 [1] ROD END  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-6431 [1] ROD END  
  144-4139 [1] ROD  
8. 192-8959 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
9. 192-8961 [1] BRACKET  
10. 198-4271 [1] LEVER  
11. 213-9100 [1] ALARM AS (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1813 E SLEEVE (29-CM)  
12. 229-3177 [1] PLATE AS  
  6V-6716 [2] RIVET-TRUSS HEAD  
  109-1645 [1] CLIP  
13. 232-6136 [2] LAMP GP-SIGNAL (24-VOLT)(STOP, TAIL, TURN)  
    (EACH INCLUDES)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 20-GA)  
14. 248-4760 [2] PLATE  
15. 272-6641 Y [2] LAMP GP-FLOOD (24-VOLT)  
16. 289-9520 [1] BRACKET AS  
17. 336-6687 [1] CAP-PROTECTIVE (FEMALE)  
18. 347-1858 Y [1] HARNESS AS-TRANSMISSION  
19. 347-1860 Y [1] HARNESS AS-SENSOR (FUEL LEVEL)  
20. 347-1862 Y [1] HARNESS AS-REAR CHASSIS  
21. 347-1865 Y [1] HARNESS AS-ENGINE  
22. 347-1866 Y [1] HARNESS AS-FRONT CHASSIS  
23. 351-6021 [2] PLATE  
24. 352-4203 [2] STRAP-CABLE  
25. 359-9192 [1] PLATE  
26. 423-9677 Y [1] HARNESS AS-LIGHTING  
27. 033-8248 [5] CLIP (LOOP)  
28. 067-3045 [1] CLIP (LOOP)  
29. 105-3487 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
30. 231-0336 M [9] STUD-TAPERLOCK (M10X1.5X70-MM)  
31. 118-7226 Y [1] SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)  
31A. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, LH)  
31B. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, RH)  
32. 124-9633 [2] CLIP (SLOT)  
33. 130-5300 [23] CLIP  
34. 130-5301 [3] CLIP  
35. 091-9035 C [3] SPACER (11X25X20-MM THK)  
36. 173-2090 [4] SPACER (11X20X15-MM THK)  
37. 174-5907 [3] CLIP (LOOP)  
38. 186-0357 [13] CLIP  
39. 1S-0994 [5] CLIP (LOOP)  
40. 214-7568 [3] SEAL-O-RING  
41. 266-2338 [1] SENSOR GP-POSITION (ROTARY)  
  9X-1813 E SLEEVE (17-CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
42. 274-4478 [1] CABLE AS (VIDEO, 11-M)  
43. 297-1546 [1] CLIP  
44. 2Y-3812 [4] CLIP  
45. 305-0660 [2] SPACER (10.5X15X15-MM THK)  
46. 3S-8664 [1] CLIP (LOOP)  
47. 3S-8665 [1] CLIP (LOOP)  
48. 4D-7388 [14] CLIP (LOOP)  
49. 4D-7735 [4] CLIP  
50. 4D-7794 C [27] CLIP  
52. 4P-7581 [2] CLIP (LADDER)  
53. 4S-1962 [9] CLIP (LOOP)  
54. 5C-2890 M [6] NUT (M6X1-THD)  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-8312 M [4] NUT (M4X0.7-THD)  
57. 5K-3294 [2] CLIP (SLOT)  
58. 5K-5338 [18] CLIP (LOOP)  
59. 5P-7470 [2] CLIP (SLOT)  
60. 5P-7471 [2] CLIP (TAB)  
61. 5P-8182 [2] GROMMET (46-MM ID)  
63. 6D-4244 [5] CLIP (LOOP)  
64. 6D-4246 [4] CLIP (LOOP)  
66. 7C-4354 [3] CLIP  
67. 204-8000 C [4] MOUNTING-CABLE TIE  
68. 8C-9660 [8] WASHER (4.6X7.9X0.8-MM THK)  
69. 8M-2770 [7] CLIP (LOOP)  
70. 8M-2773 [6] CLIP (LOOP)  
71. 107-0269 M [5] BOLT-HEAD (M8X1.25X50-MM)  
72. 8T-4121 C [123] WASHER-HARD (11X21X2.5-MM THK)  
73. 344-5675 M [21] NUT (M10X1.5-THD)  
74. 8T-4136 CM [12] BOLT (M10X1.5X25-MM)  
75. 8T-4137 CM [68] BOLT (M10X1.5X20-MM)  
76. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
77. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
78. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
79. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
80. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
81. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
82. 204-2281 C [5] STRAP-CABLE  
83. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
84. 8T-6466 M [3] BOLT (M10X1.5X60-MM)  
85. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
86. 162-2165 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
87. 9C-9458 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
88. 302-3908 [1] SPACER (11X20X30-MM THK)  
89. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
90. 9M-4972 [4] CLIP (LOOP)  
91. 9M-8406 [2] CLIP (LOOP)  
93. 172-6833 [1] CLIP (LOOP)  
94. 259-7140 M [2] STUD-TAPERLOCK (M10X1.5X80-MM)  
95. 6D-3479 [3] CLIP (LOOP)  
98. 124-3019 C [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
99. 5P-8444 [1] GROMMET (37-MM ID)  
100. 243-5821 [1] BRACKET AS  
101. 177-4562 [3] GROMMET  
102. 160-0564 [1] BRACKET AS  
103. 8T-1890 [3] CLIP (TAB)  
104. 8T-1889 [3] CLIP (SLOT)  
   
    AVAILABLE REPAIR KIT(S):
  106-4155 H [1] KIT-RETAINING BOLT  
    (INCLUDES BOLT, RING & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES PART(S) MARKED H
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240574
 

288-5655: WIRING GP-MACHINE

288-5655 WIRING GP-MACHINE -REAR
S/N SHH320-UP
CHASSIS
PART OF 492-7031 ELECTRICAL AR
i06616126 SEBP6124
2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme 2885655 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 336-6692 [1] CAP-PROTECTIVE (MALE)  
2. 4M-7146 [1] STRAP AS-GROUND  
3. 7K-1181 [55] STRAP-CABLE  
4. 8R-0721 [3] SPACER (11X16X35-MM THK)  
6. 142-1657 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 144-4138 [1] SUPPORT GP-LIGHT (ROD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  7X-7915 [1] ROD END  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-6431 [1] ROD END  
  144-4139 [1] ROD  
8. 192-8959 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
9. 192-8961 [1] BRACKET  
10. 198-4271 [1] LEVER  
11. 213-9100 [1] ALARM AS (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1813 E SLEEVE (29-CM)  
12. 229-3177 [1] PLATE AS  
  6V-6716 [2] RIVET-TRUSS HEAD  
  109-1645 [1] CLIP  
13. 450-4949 [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)(STOP, TAIL, TURN)  
    (EACH INCLUDES)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 20-GA)  
14. 248-4760 [2] PLATE  
16. 289-9520 [1] BRACKET AS  
17. 336-6687 [1] CAP-PROTECTIVE (FEMALE)  
18. 347-1858 Y [1] HARNESS AS-TRANSMISSION  
19. 347-1860 Y [1] HARNESS AS-SENSOR (FUEL LEVEL)  
20. 347-1862 Y [1] HARNESS AS-REAR CHASSIS  
21. 347-1865 Y [1] HARNESS AS-ENGINE  
22. 347-1866 Y [1] HARNESS AS-FRONT CHASSIS  
23. 351-6021 [2] PLATE  
24. 352-4203 [2] STRAP-CABLE  
25. 359-9192 [1] PLATE  
26. 423-9677 Y [1] HARNESS AS-LIGHTING  
27. 033-8248 [5] CLIP (LOOP)  
28. 067-3045 [1] CLIP (LOOP)  
29. 105-3487 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
30. 231-0336 M [9] STUD-TAPERLOCK (M10X1.5X70-MM)  
31. 118-7226 Y [1] SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)  
31A. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, LH)  
31B. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, RH)  
32. 124-9633 [2] CLIP (SLOT)  
33. 130-5300 [23] CLIP  
34. 130-5301 [3] CLIP  
35. 091-9035 [3] SPACER (11X25X20-MM THK)  
36. 173-2090 [4] SPACER (11X20X15-MM THK)  
37. 174-5907 [3] CLIP (LOOP)  
38. 186-0357 [13] CLIP  
39. 1S-0994 [5] CLIP (LOOP)  
40. 214-7568 [3] SEAL-O-RING  
41. 266-2338 [1] SENSOR GP-POSITION (ROTARY)  
  9X-1813 E SLEEVE (17-CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
42. 274-4478 [1] CABLE AS (VIDEO, 11-M)  
43. 297-1546 [1] CLIP  
44. 2Y-3812 [4] CLIP  
45. 305-0660 [2] SPACER (10.5X15X15-MM THK)  
46. 3S-8664 [1] CLIP (LOOP)  
47. 3S-8665 [1] CLIP (LOOP)  
48. 4D-7388 [14] CLIP (LOOP)  
49. 4D-7735 [4] CLIP  
50. 4D-7794 [27] CLIP  
52. 4P-7581 [2] CLIP (LADDER)  
53. 4S-1962 [9] CLIP (LOOP)  
54. 5C-2890 M [6] NUT (M6X1-THD)  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-8312 M [4] NUT (M4X0.7-THD)  
57. 5K-3294 [2] CLIP (SLOT)  
58. 5K-5338 [18] CLIP (LOOP)  
59. 5P-7470 [2] CLIP (SLOT)  
60. 5P-7471 [2] CLIP (TAB)  
61. 5P-8182 [2] GROMMET (46-MM ID)  
63. 6D-4244 [5] CLIP (LOOP)  
64. 6D-4246 [4] CLIP (LOOP)  
66. 7C-4354 [3] CLIP  
67. 204-8000 [4] MOUNTING-CABLE TIE  
68. 8C-9660 [8] WASHER (4.6X7.9X0.8-MM THK)  
69. 8M-2770 [7] CLIP (LOOP)  
70. 8M-2773 [6] CLIP (LOOP)  
71. 107-0269 M [5] BOLT-HEAD (M8X1.25X50-MM)  
72. 8T-4121 [123] WASHER-HARD (11X21X2.5-MM THK)  
73. 344-5675 M [21] NUT (M10X1.5-THD)  
74. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
75. 8T-4137 M [68] BOLT (M10X1.5X20-MM)  
76. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
77. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
78. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
79. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
80. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
81. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
82. 204-2281 [5] STRAP-CABLE  
83. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
84. 8T-6466 M [3] BOLT (M10X1.5X60-MM)  
85. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
86. 162-2165 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
87. 9C-9458 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
88. 302-3908 [1] SPACER (11X20X30-MM THK)  
89. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
90. 9M-4972 [4] CLIP (LOOP)  
91. 9M-8406 [2] CLIP (LOOP)  
93. 172-6833 [1] CLIP (LOOP)  
94. 259-7140 M [2] STUD-TAPERLOCK (M10X1.5X80-MM)  
95. 6D-3479 [3] CLIP (LOOP)  
98. 124-3019 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
99. 5P-8444 [1] GROMMET (37-MM ID)  
100. 243-5821 [1] BRACKET AS  
101. 177-4562 [3] GROMMET  
102. 160-0564 [1] BRACKET AS  
103. 8T-1890 [3] CLIP (TAB)  
104. 8T-1889 [3] CLIP (SLOT)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240575
 

531-4592: WIRING GP-MACHINE

531-4592 WIRING GP-MACHINE
S/N SHH320-UP
CHASSIS
PART OF 492-7031 ELECTRICAL AR
i07163251 SEBP6124
5314592 WIRING GP-MACHINE Parts scheme 5314592 WIRING GP-MACHINE Parts scheme 5314592 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7146 [1] STRAP AS-GROUND  
2. 7K-1181 [12] STRAP-CABLE  
3. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, RH)  
3A. 118-7226 Y [1] SENSOR GP-TEMPERATURE (REAR BRAKE OIL, LH)  
3B. 118-7226 Y [1] SENSOR GP-TEMPERATURE (TORQUE CONVERTER)  
4. 125-8534 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 142-1657 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 160-0564 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 192-8959 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
8. 192-8961 [1] BRACKET  
9. 193-5576 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 229-3177 [1] PLATE AS  
  6V-6716 [2] RIVET-TRUSS HEAD  
  109-1645 [1] CLIP  
11. 243-5821 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  246-7387 [1] BRACKET  
12. 289-9520 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  289-9519 [1] BRACKET  
13. 297-5513 [1] CABLE AS  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
  159-8054 E CABLE-ELECTRICAL (0000-GA, BLACK)(85-CM)  
16. 347-1858 Y [1] HARNESS AS-TRANSMISSION  
17. 347-1860 Y [1] HARNESS AS-SENSOR (FUEL LEVEL)  
18. 347-1865 Y [1] HARNESS AS-ENGINE  
19. 539-6144 Y [1] HARNESS AS-CHASSIS  
20. 351-6021 [2] PLATE  
21. 352-4203 [2] STRAP-CABLE  
26. 091-9035 [3] SPACER (11X25X20-MM THK)  
27. 483-4287 [8] PLATE  
28. 162-2165 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
29. 172-6833 [1] CLIP (LOOP)  
30. 173-2090 [2] SPACER (11X20X15-MM THK)  
31. 177-4562 [3] GROMMET  
32. 178-3620 [1] STRAP-DUAL CLAMP  
33. 186-0357 [5] CLIP  
34. 1S-0994 [2] CLIP (LOOP)  
35. 204-2281 [48] STRAP-CABLE  
36. 204-8000 [2] MOUNTING-CABLE TIE  
37. 214-7568 [3] SEAL-O-RING  
38. 231-0336 M [9] STUD-TAPERLOCK (M10X1.5X70-MM)  
39. 274-4478 [1] CABLE AS (VIDEO, 11-M)  
40. 533-4159 [6] BOLT AS  
41. 2Y-3812 [4] CLIP  
42. 302-3908 [1] SPACER (11X20X30-MM THK)  
43. 305-0660 [2] SPACER (10.5X15X15-MM THK)  
44. 344-5675 M [13] NUT (M10X1.5-THD)  
45. 3S-8664 [1] CLIP (LOOP)  
46. 4D-7388 [14] CLIP (LOOP)  
47. 4D-7735 [3] CLIP  
48. 4D-7794 [21] CLIP  
49. 4S-1962 [9] CLIP (LOOP)  
50. 5C-8312 M [4] NUT (M4X0.7-THD)  
51. 5G-3676 [2] GROMMET  
52. 5K-5338 [17] CLIP (LOOP)  
53. 5P-7470 [2] CLIP (SLOT)  
54. 5P-7471 [2] CLIP (TAB)  
55. 5P-8182 [2] GROMMET (46-MM ID)  
56. 5P-8444 [1] GROMMET (37-MM ID)  
57. 6D-4244 [1] CLIP (LOOP)  
58. 6D-4246 [2] CLIP (LOOP)  
59. 6H-7062 [1] SPACER (13.5X25X19-MM THK)  
60. 8C-9660 [8] WASHER (4.6X7.9X0.8-MM THK)  
61. 8M-2770 [3] CLIP (LOOP)  
62. 8M-2773 [1] CLIP (LOOP)  
63. 8R-0721 [1] SPACER (11X16X35-MM THK)  
64. 8T-1889 [5] CLIP (SLOT)  
65. 8T-1890 [5] CLIP (TAB)  
66. 8T-4121 [56] WASHER-HARD (11X21X2.5-MM THK)  
67. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
68. 8T-4137 M [36] BOLT (M10X1.5X20-MM)  
69. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
70. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
71. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
72. 470-4908 [4] PLATE  
73. 470-4909 [4] PLATE  
74. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
75. 8T-4835 [1] BOLT (1/2-13X2-IN)  
76. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
77. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
78. 9C-9458 [1] BRACKET AS  
79. 9M-4972 [1] CLIP (LOOP)  
80. 9M-8406 [1] CLIP (LOOP)  
81. 479-2171 [8] BOLT AS  
82. 479-2172 [2] BOLT AS  
83. 292-2893 E CONDUIT (10.1-MM ID)(10-CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240576
 

531-4594: WIRING GP-MACHINE

531-4594 WIRING GP-MACHINE -REAR
S/N SHH320-UP
PART OF 492-7031 ELECTRICAL AR
i07163215 SEBP6124
5314594 WIRING GP-MACHINE Parts scheme 5314594 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 124-3019 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 144-4138 [1] SUPPORT GP-LIGHT (ROD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  7X-7915 [1] ROD END  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-6431 [1] ROD END  
  144-4139 [1] ROD  
4. 198-4271 [1] LEVER  
5. 213-9100 [1] ALARM AS (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1813 E SLEEVE (29-CM)  
6. 248-4760 [2] PLATE  
7. 266-2338 [1] SENSOR GP-POSITION (ROTARY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  9X-1813 E SLEEVE (17-CM)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
8. 359-9192 [1] PLATE  
9. 423-9677 Y [1] HARNESS AS-LIGHTING (TAIL)  
10. 450-4949 [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)  
    (EACH INCLUDES)
  3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 539-6143 Y [1] HARNESS AS-REAR CHASSIS  
12. 033-8248 [5] CLIP (LOOP)  
13. 067-3045 [1] CLIP (LOOP)  
14. 105-3487 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
15. 107-0269 M [5] BOLT-HEAD (M8X1.25X50-MM)  
16. 124-9633 [2] CLIP (SLOT)  
17. 130-5300 [8] CLIP  
18. 130-5301 [3] CLIP  
19. 173-2090 [2] SPACER (11X20X15-MM THK)  
20. 174-5907 [3] CLIP (LOOP)  
21. 186-0357 [8] CLIP  
22. 1S-0994 [3] CLIP (LOOP)  
23. 204-2281 [2] STRAP-CABLE  
24. 204-8000 [2] MOUNTING-CABLE TIE  
25. 259-7140 M [2] STUD-TAPERLOCK (M10X1.5X80-MM)  
26. 297-1546 [1] CLIP  
27. 344-5675 M [8] NUT (M10X1.5-THD)  
28. 3S-8665 [1] CLIP (LOOP)  
29. 4D-7735 [1] CLIP  
30. 4D-7794 [6] CLIP  
31. 4P-7581 [2] CLIP (LADDER)  
32. 5C-2890 M [6] NUT (M6X1-THD)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 5K-3294 [2] CLIP (SLOT)  
35. 5K-5338 [1] CLIP (LOOP)  
36. 6D-3479 [3] CLIP (LOOP)  
37. 6D-4244 [4] CLIP (LOOP)  
38. 6D-4246 [2] CLIP (LOOP)  
39. 7C-4354 [3] CLIP  
40. 7X-2541 M [2] BOLT (M8X1.25X140-MM)  
41. 8M-2770 [4] CLIP (LOOP)  
42. 8M-2773 [5] CLIP (LOOP)  
43. 8R-0721 [2] SPACER (11X16X35-MM THK)  
44. 8T-4121 [54] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
46. 8T-4137 M [32] BOLT (M10X1.5X20-MM)  
47. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
48. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
49. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
50. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
51. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
52. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
53. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
54. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
55. 9M-4972 [3] CLIP (LOOP)  
56. 9M-8406 [1] CLIP (LOOP)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61240577
 

345-8962: WIRING GP-MIRROR

345-8962 WIRING GP-MIRROR -HEATED
S/N SHH1-UP
PART OF 348-8737, 348-8738 MIRROR AR-REAR VIEW
AN ATTACHMENT
i04539813 SEBP6124
3458962 WIRING GP-MIRROR Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [23] STRAP-CABLE  
2. 352-8802 [1] HARNESS AS-WIRING (PLATFORM, RH)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  114-8843 E SLEEVE-PLASTIC (60-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 352-8803 [1] HARNESS AS-WIRING (PLATFORM, LH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  114-8843 E SLEEVE-PLASTIC (40-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 357-7765 [1] HARNESS AS-WIRING (HEATED MIRROR, RH)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  114-8843 E SLEEVE-PLASTIC (40-CM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 130-5300 [4] CLIP  
6. 4D-7794 [1] CLIP  
  E   ORDER BY THE CENTIMETER
 

#SEBP61240578
 

345-8906: WIRING GP-MONITOR

345-8906 WIRING GP-MONITOR -PAYLOAD CONTROL SYSTEM
S/N SHH1-319
PLATFORM, RH, LAMP
PART OF 344-0258 INSTALLATION AR-PAYLOAD
AN ATTACHMENT
i04539030 SEBP6124
3458906 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2687 [6] SCREW-PAN HEAD (10-24X1-IN)  
2. 9F-8125 [6] LOCKWASHER  
3. 248-1264 [1] PLATE AS  
  8F-9836 [1] BOSS (3/8-16-THD)  
4. 248-1265 [1] BRACKET AS  
  1F-0750 [4] NUT-WELD (3/8-16-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
5. 285-9275 [1] BRACKET AS  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [3] NUT-WELD (M12X1.75-THD)  
6. 353-2588 [1] HARNESS AS-LIGHTING  
  1P-0810 B TAPE-ELECTRICAL  
  8T-8737 [4] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  1S-4915 [2] LINER (CONDUIT)  
  5P-0695 E CONDUIT (266-CM)  
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 033-8248 [1] CLIP (LOOP)  
8. 130-5300 [2] CLIP  
9. 1S-0994 [9] CLIP (LOOP)  
10. 246-9869 [1] LAMP GP-PAYLOAD SIGNAL (24-VOLT)  
11. 246-9870 [1] LAMP GP-PAYLOAD SIGNAL (24-VOLT)  
12. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
13. 5P-7648 [1] GROMMET  
14. 8D-1470 [1] GROMMET  
15. 8T-4121 [19] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4137 M [19] BOLT (M10X1.5X20-MM)  
17. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP61240579
 

345-8906: WIRING GP-MONITOR

345-8906 WIRING GP-MONITOR -PAYLOAD CONTROL SYSTEM
S/N SHH320-UP
PLATFORM, RH, LAMP
PART OF 344-0258 INSTALLATION AR-PAYLOAD
AN ATTACHMENT
i07071837 SEBP6124
3458906 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 789D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2687 [6] SCREW-PAN HEAD (10-24X1-IN)  
2. 096-0192 [6] LOCKWASHER  
3. 248-1264 [1] PLATE AS  
  8F-9836 [1] BOSS (3/8-16-THD)  
4. 248-1265 [1] BRACKET AS  
  1F-0750 [4] NUT-WELD (3/8-16-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
5. 285-9275 [1] BRACKET AS  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [3] NUT-WELD (M12X1.75-THD)  
6. 353-2588 [1] HARNESS AS-LIGHTING  
  1P-0810 B TAPE-ELECTRICAL  
  8T-8737 [8] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  1S-4915 [2] LINER (CONDUIT)  
  5P-0695 E CONDUIT (266-CM)  
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 033-8248 [1] CLIP (LOOP)  
8. 130-5300 [2] CLIP  
9. 1S-0994 [9] CLIP (LOOP)  
10. 246-9869 [1] LAMP GP-PAYLOAD SIGNAL (24-VOLT)(RED)  
11. 246-9870 [1] LAMP GP-PAYLOAD SIGNAL (24-VOLT)(GREEN)  
    (EACH LAMP GP INCLUDES)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
12. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
13. 5P-7648 [1] GROMMET  
14. 8D-1470 [1] GROMMET  
15. 8T-4121 C [15] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4137 CM [15] BOLT (M10X1.5X20-MM)  
17. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
18. 5M-3062 C [4] BOLT (3/8-16X0.75-IN)  
19. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Caterpillar Parts SIS Catalog 789D :

WIRING GP-LUBRICATION
321-6780 WIRING GP-LUBRICATION
WIRING GP-LUBRICATION
321-6780 WIRING GP-LUBRICATION
WIRING GP-LUBRICATION
321-6780 WIRING GP-LUBRICATION
WIRING GP-LIGHTING
351-3615 WIRING GP-LIGHTING
WIRING GP-LIGHTING
351-3615 WIRING GP-LIGHTING
WIRING GP-LIGHTING
345-8909 WIRING GP-LIGHTING
WIRING GP-LIGHTING
345-8909 WIRING GP-LIGHTING
WIRING GP-LIGHTING
345-8908 WIRING GP-LIGHTING
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
WIRING GP-MACHINE
288-5655 WIRING GP-MACHINE
WIRING GP-MACHINE
531-4592 WIRING GP-MACHINE
WIRING GP-MACHINE
531-4594 WIRING GP-MACHINE
WIRING GP-MIRROR
345-8962 WIRING GP-MIRROR
WIRING GP-MONITOR
345-8906 WIRING GP-MONITOR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.