383-8246 LINES GP-RIPPER S/N T5X1-UP PART OF 383-8250, 432-5455 RIPPER AR, 385-0335, 385-0338 RIPPER AR-MULTISHANK, 385-0333, 385-0334, 385-0336, 385-0337 RIPPER AR-SINGLE SHANK AN ATTACHMENT D8R

HYDRAULIC SYSTEM

LINES GP-RIPPER

0. 383-8246 LINES GP-R
1. 383-8261 LINES GP-R

LINES GP-CYLINDER

2. 116-7810 LINES GP-T
3. 237-4369 LINES GP-T
4. 237-9235 LINES GP-T
5. 256-4905 LINES GP-T
6. 261-4802 LINES GP-T
7. 384-2532 LINES GP-T
8. 385-6012 LINES GP-T
9. 386-5277 LINES GP-T
0. INFORMATION

TRACK-TYPE TRACTOR D8R TRACK-TYPE TRACTOR T5X
D8R TRACK-TYPE TRACTOR T5X00001-UP (MACHINE) POWERED BY 3406C Engine SEBP6188 D8R T5X (2014)

HYDRAULIC SYSTEM

LINES GP-RIPPER

383-8246 LINES GP-RIPPER

383-8261 LINES GP-RIPPER

#SEBP61880560

383-8246: LINES GP-RIPPER

LINES GP-RIPPER

383-8246 LINES GP-RIPPER
S/N T5X1-UP
PART OF 383-8250, 432-5455 RIPPER AR, 385-0335, 385-0338 RIPPER AR-MULTISHANK, 385-0333, 385-0334, 385-0336, 385-0337 RIPPER AR-SINGLE SHANK
AN ATTACHMENT

i05333151 SEBP6188

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-5561 I	[1]	HOSE AS
2.	8E-5562 I	[1]	HOSE AS
3.	8E-5563 I	[2]	HOSE AS
4.	9M-2904	[16]	CLAMP-HOSE
5.	130-1977	[16]	SHIELD
6.	130-9191	[8]	GROMMET
7.	139-2455	[2]	SHIELD
8.	139-2456	[2]	SHIELD
9.	189-5605 I	[2]	HOSE AS
10.	189-5606 I	[1]	HOSE AS
11.	189-5607 I	[1]	HOSE AS
12.	190-1475	[2]	SHIELD
13.	4J-0520	[6]	SEAL-O-RING
14.	4J-5267	[10]	SEAL-O-RING
15.	8T-4186 M	[12]	BOLT (M10X1.5X40-MM)
16.	482-7541	[8]	GROMMET
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP61880561

383-8261: LINES GP-RIPPER

LINES GP-RIPPER

383-8261 LINES GP-RIPPER
S/N T5X1-UP
PART OF 383-8148 CONTROL AR-HYDRAULIC
ALSO AN ATTACHMENT

i05319734 SEBP6188

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-5588	[1]	BRACKET AS
2.	8W-4202 I	[1]	HOSE AS
3.	100-7443 I	[1]	HOSE AS
4.	108-9307	[2]	ELBOW
5.	112-8192 I	[1]	HOSE AS
6.	112-8193 I	[1]	HOSE AS
7.	128-8623	[1]	PLATE AS
8.	1P-3704	[1]	SEAL-RECTANGULAR
9.	3G-8054	[1]	CLIP (TAB)
10.	3G-8057	[1]	CLIP (SLOT)
11.	4J-0520	[6]	SEAL-O-RING
12.	5P-2566	[2]	BOLT (1/2-13X1.5-IN)
13.	6J-7035	[1]	FLANGE
14.	6V-0974	[1]	GROMMET
15.	6V-8397	[2]	SEAL-O-RING
16.	6V-8724	[1]	ELBOW
17.	6V-8801	[1]	NUT (3/8-16-THD)
18.	7G-5984	[1]	CLIP (TAB)
19.	7G-5985	[1]	CLIP (SLOT)
20.	7G-5986	[1]	GROMMET
21.	7X-0292	[4]	BOLT (3/8-16X4.5-IN)
22.	7X-0294	[4]	BOLT (3/8-16X5-IN)
23.	8C-4436	[2]	BOLT (1/2-13X1.375-IN)
24.	8T-1905	[1]	ELBOW
25.	8T-2502	[1]	BOLT (3/8-16X1.125-IN)
26.	8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-4896	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
28.	8T-8917	[6]	BOLT (1/2-13X1.25-IN)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP61880562

116-7810: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

116-7810 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 383-8145 CONTROL GP-HYDRAULIC
AN ATTACHMENT

i05329661 SEBP6188

1167810 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4J-0520	[2]	SEAL-O-RING
2.	4J-5267	[4]	SEAL-O-RING
3.	5C-6565	[4]	BOLT (1/2-13X1.125-IN)
4.	5H-4018	[2]	COVER
5.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
6.	7G-3832	[5]	GROMMET
7.	7G-3833	[5]	CLIP (TAB)
8.	7G-3834	[5]	CLIP (SLOT)
9.	8C-4436	[4]	BOLT (1/2-13X1.375-IN)
10.	8E-8916	[1]	MANIFOLD
11.	8T-8917	[6]	BOLT (1/2-13X1.25-IN)
12.	9W-3162	[1]	BRACKET AS
13.	132-5535	[1]	BRACKET AS
14.	116-7808 I	[2]	HOSE AS
15.	8T-4896	[16]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	1P-4576	[8]	FLANGE-HALF
17.	4L-6454	[2]	BOLT (3/8-16X1-IN)
18.	5S-7382	[16]	BOLT (3/8-16X1.375-IN)
19.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP61880563

237-4369: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

237-4369 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 385-5575 INSTALLATION AR-BULLDOZER
AN ATTACHMENT

i05324998 SEBP6188

2374369 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-9333	[1]	GUARD
2.	8E-6183	[1]	TUBE AS
3.	239-3344	[2]	TUBE AS
4.	239-3345 I	[2]	HOSE AS
6.	239-3350	[1]	GUARD
7.	295-6897 I	[2]	HOSE AS
9.	4J-5267	[9]	SEAL-O-RING
10.	5P-1076	[10]	WASHER-HARD (13.5X30X4-MM THK)
11.	7D-4108	[3]	CLAMP
12.	7X-2559 M	[2]	BOLT (M16X2X160-MM)
13.	8C-3205	[12]	FLANGE-HALF
14.	8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
16.	8T-4139 M	[13]	BOLT (M12X1.75X30-MM)
17.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
18.	8T-4196 M	[24]	BOLT (M10X1.5X35-MM)
19.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	8T-4778 M	[2]	LOCKNUT (M16X2-THD)
21.	9X-2027	[4]	WASHER (11X18X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP61880564

237-9235: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

237-9235 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 385-5577 INSTALLATION AR-BULLDOZER
AN ATTACHMENT

i05325176 SEBP6188

2379235 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	179-7210	[1]	GUARD (RH)
2.	8T-4122	[8]	WASHER-HARD (17X32X3.5-MM THK)
3.	7X-2559 M	[4]	BOLT (M16X2X160-MM)
4.	239-3344	[2]	TUBE AS
5.	252-6517	[3]	BLOCK
6.	8T-4778 M	[4]	LOCKNUT (M16X2-THD)
7.	129-5082	[6]	BLOCK
8.	183-7205	[1]	ANGLE
9.	183-7206	[1]	ANGLE
10.	6I-8516	[1]	ANGLE
11.	108-1226	[2]	TUBE AS
12.	108-1225	[2]	TUBE AS
13.	8E-3600	[6]	PLATE
15.	183-5408 I	[2]	HOSE AS
17.	239-7071 I	[2]	HOSE AS
19.	239-7072 I	[2]	HOSE AS
21.	239-7074 I	[2]	HOSE AS
22.	159-0867	[1]	GUARD (LH)
23.	4T-3981	[6]	CLIP
24.	8T-4121	[76]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
26.	179-7209	[2]	TUBE AS
27.	4J-0520	[2]	SEAL-O-RING
28.	8C-3205	[32]	FLANGE-HALF
29.	8T-4196 M	[64]	BOLT (M10X1.5X35-MM)
30.	8C-3206	[4]	FLANGE-HALF
31.	7W-3447	[8]	SPACER (10.2X19.05X10.2-MM THK)
32.	8T-4182 M	[8]	BOLT (M10X1.5X45-MM)
34.	297-4986 I	[2]	HOSE AS
35.	7D-4108	[3]	CLAMP
36.	239-7078	[1]	GUARD
37.	241-7877	[2]	TUBE AS
38.	4J-5267	[22]	SEAL-O-RING
39.	5P-1076	[11]	WASHER-HARD (13.5X30X4-MM THK)
40.	8T-4139 M	[11]	BOLT (M12X1.75X30-MM)
41.	9X-2027	[8]	WASHER (11X18X2-MM THK)
42.	8T-4185 M	[8]	BOLT (M10X1.5X50-MM)
43.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-6868 M	[3]	BOLT (M12X1.75X80-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP61880565

256-4905: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

256-4905 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 385-5578 INSTALLATION AR-BULLDOZER
AN ATTACHMENT

i05325696 SEBP6188

2564905 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-9333	[1]	GUARD
2.	8E-6183	[1]	TUBE AS
3.	239-3345 I	[2]	HOSE AS
4.	295-6897 I	[2]	HOSE AS
5.	256-4907	[2]	TUBE AS
6.	256-4909	[1]	GUARD
7.	4J-5267	[9]	SEAL-O-RING
8.	5P-1076	[12]	WASHER-HARD (13.5X30X4-MM THK)
9.	7D-4108	[4]	CLAMP
10.	7X-2559 M	[2]	BOLT (M16X2X160-MM)
11.	8C-3205	[12]	FLANGE-HALF
12.	8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
14.	8T-4139 M	[16]	BOLT (M12X1.75X30-MM)
15.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
16.	8T-4196 M	[24]	BOLT (M10X1.5X35-MM)
17.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8T-4778 M	[2]	LOCKNUT (M16X2-THD)
19.	9X-2027	[4]	WASHER (11X18X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP61880566

261-4802: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

261-4802 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 385-5580 INSTALLATION AR-BULLDOZER
AN ATTACHMENT

i05326079 SEBP6188

2614802 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-3981	[6]	CLIP
2.	6I-8514	[2]	ANGLE
3.	6I-8516	[1]	ANGLE
4.	7W-3447	[8]	SPACER (10.2X19.05X10.2-MM THK)
5.	8E-3600	[6]	PLATE
6.	108-1225	[2]	TUBE AS
7.	108-1226	[2]	TUBE AS
8.	159-0867	[1]	GUARD (LH)
9.	179-7209	[2]	TUBE AS
10.	179-7210	[1]	GUARD (RH)
11.	239-3344	[2]	TUBE AS
12.	239-7071 I	[2]	HOSE AS
13.	239-7072 I	[2]	HOSE AS
14.	252-6517	[2]	BLOCK
15.	256-4907	[2]	TUBE AS
16.	261-4844	[1]	GUARD
17.	297-4986 I	[2]	HOSE AS
18.	385-6011 I	[2]	HOSE AS
19.	385-6013 I	[2]	HOSE AS
20.	129-5082	[6]	BLOCK
21.	4J-0520	[2]	SEAL-O-RING
22.	4J-5267	[22]	SEAL-O-RING
23.	5P-1076	[13]	WASHER-HARD (13.5X30X4-MM THK)
24.	7D-4108	[4]	CLAMP
25.	7X-2559 M	[4]	BOLT (M16X2X160-MM)
26.	8C-3205	[32]	FLANGE-HALF
27.	8C-3206	[4]	FLANGE-HALF
28.	8T-4121	[76]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4122	[8]	WASHER-HARD (17X32X3.5-MM THK)
30.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
31.	8T-4139 M	[15]	BOLT (M12X1.75X30-MM)
32.	8T-4182 M	[8]	BOLT (M10X1.5X45-MM)
33.	8T-4185 M	[8]	BOLT (M10X1.5X50-MM)
34.	8T-4196 M	[64]	BOLT (M10X1.5X35-MM)
35.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-4778 M	[4]	LOCKNUT (M16X2-THD)
37.	8T-6868 M	[2]	BOLT (M12X1.75X80-MM)
38.	9X-2027	[8]	WASHER (11X18X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP61880567

384-2532: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

384-2532 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 383-8146 CONTROL GP-HYDRAULIC
AN ATTACHMENT

i06103855 SEBP6188

3842532 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-5888	[1]	SPACER (0.42X0.67X0.63-IN THK)
2.	2H-9233	[1]	SPACER (0.563X1X1-IN THK)
3.	8E-4331	[2]	PLATE AS
4.	8E-7112	[1]	ELBOW
5.	8P-9679	[2]	SPACER (10.5X25X40-MM THK)
6.	9G-8661	[1]	SPACER (10X16X20-MM THK)
7.	9W-3162	[1]	BRACKET AS
8.	119-3303	[1]	BRACKET
9.	132-5535	[1]	BRACKET AS
10.	143-7731 I	[1]	HOSE AS
11.	161-5746 I	[1]	HOSE AS
12.	161-5747 I	[1]	HOSE AS
13.	205-6428 I	[1]	HOSE AS
14.	382-6103	[1]	PLATE AS
15.	148-8378	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
16.	148-8433	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
17.	150-3036	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8T-1905	[1]	ELBOW
18.	160-8138	[1]	HARNESS AS-SWITCH (DUAL TILT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
19.	160-8182	[1]	HARNESS AS-VALVE (DUAL TILT)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	189-3158	[2]	SUPPRESSOR-ARC
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
20.	1P-4576	[6]	FLANGE-HALF
21.	4J-0520	[3]	SEAL-O-RING
22.	4J-5267	[3]	SEAL-O-RING
23.	4L-6454	[2]	BOLT (3/8-16X1-IN)
24.	4L-6459	[1]	BOLT (3/8-16X2.5-IN)
25.	4L-9337	[1]	BOLT (3/8-16X1.5-IN)
26.	5C-6565	[4]	BOLT (1/2-13X1.125-IN)
27.	5H-4018	[2]	COVER
28.	5K-5338	[5]	CLIP (LOOP)
29.	5P-1075	[12]	WASHER-HARD (10.2X22.5X3-MM THK)
30.	5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
31.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
32.	5S-7382	[12]	BOLT (3/8-16X1.375-IN)
33.	5S-7383	[1]	BOLT (3/8-16X1.75-IN)
34.	6D-4247	[1]	CLIP
35.	6V-8801	[2]	NUT (3/8-16-THD)
36.	7D-1649	[1]	WASHER-HARD (13.5X32X5-MM THK)
37.	7G-3832	[5]	GROMMET
38.	7G-3833	[5]	CLIP (TAB)
39.	7G-3834	[5]	CLIP (SLOT)
40.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
41.	7X-0346	[1]	BOLT (5/8-11X2-IN)
42.	8C-4436	[4]	BOLT (1/2-13X1.375-IN)
43.	8T-4896	[16]	WASHER-HARD (10.2X18.5X2.5-MM THK)
44.	8T-5360	[3]	WASHER (12X22.5X2.5-MM THK)
45.	8T-8917	[6]	BOLT (1/2-13X1.25-IN)
46.	8T-9101	[1]	BOLT (3/8-16X2.75-IN)
47.	8T-9379	[4]	BOLT (3/8-16X4.25-IN)
48.	8T-9382	[3]	BOLT (7/16-14X1.25-IN)
49.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP61880568

385-6012: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

385-6012 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 385-5579 INSTALLATION AR-BULLDOZER
AN ATTACHMENT

i05326060 SEBP6188

3856012 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-9333	[1]	GUARD
2.	8E-6183	[1]	TUBE AS
3.	239-9970 I	[2]	HOSE AS
4.	297-4986 I	[2]	HOSE AS
5.	256-4907	[2]	TUBE AS
6.	256-4909	[1]	GUARD
7.	4J-5267	[9]	SEAL-O-RING
8.	5P-1076	[12]	WASHER-HARD (13.5X30X4-MM THK)
9.	7D-4108	[4]	CLAMP
10.	7X-2559 M	[2]	BOLT (M16X2X160-MM)
11.	8C-3205	[12]	FLANGE-HALF
12.	8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
14.	8T-4139 M	[16]	BOLT (M12X1.75X30-MM)
15.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
16.	8T-4196 M	[24]	BOLT (M10X1.5X35-MM)
17.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8T-4778 M	[2]	LOCKNUT (M16X2-THD)
19.	9X-2027	[4]	WASHER (11X18X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP61880569

386-5277: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

386-5277 LINES GP-TILT CYLINDER
S/N T5X1-UP
PART OF 385-5576 INSTALLATION AR-BULLDOZER
AN ATTACHMENT

i05325056 SEBP6188

3865277 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-9333	[1]	GUARD
2.	8E-6183	[1]	TUBE AS
3.	239-3344	[2]	TUBE AS
4.	239-3350	[1]	GUARD
5.	239-9970 I	[2]	HOSE AS
6.	297-4986 I	[2]	HOSE AS
7.	4J-5267	[9]	SEAL-O-RING
8.	5P-1076	[10]	WASHER-HARD (13.5X30X4-MM THK)
9.	7D-4108	[3]	CLAMP
10.	7X-2559 M	[2]	BOLT (M16X2X160-MM)
11.	8C-3205	[12]	FLANGE-HALF
12.	8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
14.	8T-4139 M	[13]	BOLT (M12X1.75X30-MM)
15.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
16.	8T-4196 M	[24]	BOLT (M10X1.5X35-MM)
17.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8T-4778 M	[2]	LOCKNUT (M16X2-THD)
19.	9X-2027	[4]	WASHER (11X18X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART