436-9225 ENGINE AR-CORE S/N TXH4230-5779; TXH5880-UP PART OF 432-4750, 432-4751 ENGINE AR AN ATTACHMENT 24M

Part No	Qty	Parts name
436-7110 Y	[1]	BASE GP-VALVE COVER & INJ HARN
314-9614 Y	[1]	CAMSHAFT GP
189-4917 Y	[1]	CRANKSHAFT GP
358-6883 Y	[1]	CYLINDER BLOCK GP
432-5472 Y	[1]	CYLINDER HEAD GP
207-0449 Y	[1]	GEAR GP-FRONT
266-3699 Y	[1]	MECHANISM GP-FUEL PUMP & VALVE
		S/N TXH4230-4971;5880-UP
448-2419 Y	[1]	MECHANISM GP-FUEL PUMP & VALVE
		S/N TXH4972-5779
368-7822 Y	[6]	PISTON & ROD GP
161-4113 Y	[1]	PUMP GP-ENGINE OIL
235-1402 Y	[6]	PUMP GP-FUEL INJECTION
174-5986 Y	[1]	PUMP GP-WATER
354-0041 Y	[1]	SENSOR GP-ENGINE

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP63780021

453-3122: KIT-CONVERSION

KIT-CONVERSION

453-3122 KIT-CONVERSION
S/N B931-UP
CONVERSION KIT FOR THE MESABI RADIATOR ON THE 24M
FIELD INSTALLATION

i05698849 SEBP6378

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
437-0341 Y	[1]	RADIATOR GP
345-3923	[2]	ADAPTER-HOSE
144-4613	[1]	ANGLE AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8T-4136 M	[39]	BOLT (M10X1.5X25-MM)
8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
8T-4195 M	[23]	BOLT (M10X1.5X30-MM)
8T-4196 M	[7]	BOLT (M10X1.5X35-MM)
8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
136-1122	[4]	BUSHING
319-2305	[1]	CAM-LATCH
294-3342	[1]	CAP-RADIATOR
157-0670	[1]	CAP-DUST
418-3810	[2]	CHANNEL
209-4579	[2]	CLAMP
216-4983	[4]	CLAMP-T BOLT
5D-1026	[2]	CLAMP-BAND
1P-4278	[1]	CLAMP-HOSE
8T-1117	[2]	CLAMP-HOSE
144-0367	[2]	CLAMP-HOSE
4N-1199	[1]	CLIP
6D-4244	[3]	CLIP (LOOP)
7D-7233	[3]	CLIP (LOOP)
9X-2646	[1]	CLIP (SLOT)
9X-2647	[1]	CLIP (TAB)
033-8248	[4]	CLIP (LOOP)
6V-2492	[1]	CONNECTOR
8C-6866	[1]	CONNECTOR
124-2111	[1]	COUPLING-PERMANENT
124-2140	[1]	COUPLING-PERMANENT
394-3824	[1]	DOOR AS
1V-8284	[1]	HINGE
6V-9000	[1]	ELBOW
9Y-9236	[1]	GAUGE-SIGHT
210-9479	[1]	HOSE
251-7214	[1]	HOSE
265-5007	[1]	HOSE
322-8274	[1]	HOSE
275-0572	[1]	LATCH AS
8T-4133 M	[3]	NUT (M10X1.5-THD)
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
451-1494	[1]	PLATE AS
8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
3J-7354	[1]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
7M-8485	[1]	SEAL-O-RING
7C-8246	[4]	SPACER (10.5X20X24-MM THK)
384-7031	[1]	TANK AS-COOLANT
8N-8846	[1]	NECK-FILLER
9R-2613 M	[2]	BOSS-WELD (M10X1.5X25-MM)
133-0661	[1]	BOSS
390-8403	[1]	TUBE
387-2016	[1]	TUBE AS
154-9025	[1]	VALVE-SAMPLING (ENGINE COOLANT)
7X-7729	[5]	WASHER (11X25X3-MM THK)
8T-4121	[69]	WASHER-HARD (11X21X2.5-MM THK)
198-4777	[6]	WASHER-HARD (11X25X10-MM THK)
7X-0632	[4]	WASHER-HARD (11X36X6-MM THK)
8T-4226	[4]	WASHER-PLATED (10.5X45X3-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP63780022

435-4709: KIT-ENGINE

KIT-ENGINE

435-4709 KIT-ENGINE -UPGRADE
S/N B931-UP
FOR USE WITH @@@@@435-4710@@@@@, @@@@@435-4712@@@@@, REHS4297
FIELD INSTALLATION

i05372417 SEBP6378

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
392-7915 Y	[1]	TURBOCHARGER GP
165-3930	[1]	BOLT (3/8-16X1.625-IN)
383-3640	[1]	BRACKET AS
4M-6480	[1]	GASKET
2A-1162	[1]	GASKET
357-1752	[1]	GASKET-TURBOCHARGER
325-9666	[1]	GEAR AS (45-TEETH)
325-9668	[2]	GEAR AS-IDLER (57-TEETH)
384-7539	[1]	GEAR AS-PUMP
550-0893	[1]	HOUSING AS-FLYWHEEL
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
380-8545	[1]	MANIFOLD-EXHAUST
5F-0304	[1]	PLUG
327-2566	[1]	RETAINER AS
395-0512	[1]	RETAINER AS (IDLER)
234-8937	[1]	SEAL-INTEGRAL
214-7567	[1]	SEAL-O-RING
357-0351 M	[4]	STUD-TAPERLOCK (M10X1.5X60-MM)
380-2396	[1]	SUPPORT AS-ENGINE (FRONT)
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP63780023

435-4710: KIT-ENGINE

KIT-ENGINE

435-4710 KIT-ENGINE -AIR COND, ALT, AND ATTAC
S/N B931-UP
FOR USE WITH @@@@@435-4709@@@@@, @@@@@435-4712@@@@@, REHS4297 & SENR5664
FIELD INSTALLATION

i05372410 SEBP6378

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
394-9671 Y	[1]	COMPRESSOR GP-REFRIGERANT
364-0688	[1]	ADAPTER AS
437-0124	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE)
329-8797	[1]	BELT TENSIONER
227-1364	[1]	BELT-SERPENTINE (ALTERNATOR, COMPRESSOR)
0S-1585	[6]	BOLT (1/2-13X1.5-IN)
0T-0573	[1]	BOLT (3/8-16X2.75-IN)
7B-3235	[6]	BOLT (1/2-13X1.375-IN)
7X-2543 M	[4]	BOLT (M10X1.5X120-MM)
8T-0639 M	[4]	BOLT (M6X1X12-MM)
8T-4136 M	[9]	BOLT (M10X1.5X25-MM)
8T-4179 M	[1]	BOLT (M12X1.75X20-MM)
8T-5436 M	[4]	BOLT (M10X1.5X130-MM)
8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
255-1281 M	[4]	BOLT-FLANGE HEAD (M8X1.25X100-MM)
105-3484 M	[1]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
420-9411	[1]	BRACKET AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
420-9412	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
420-9416	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
420-9413	[1]	CABLE AS
1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
159-8049 E		CABLE (00-GA, RED)(77-CM)
420-9414	[1]	CABLE AS
1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
159-8050 E		CABLE (00-GA, BLACK)(36-CM)
311-3475	[1]	TERMINAL-RING
3E-5165	[1]	CAP AS-PROTECTION
6G-2256	[1]	CLAMP
4S-1962	[1]	CLIP (LOOP)
6D-4246	[2]	CLIP (LOOP)
6V-1889	[2]	CLIP (LOOP)
101-2862	[2]	DOWEL
7V-6571	[1]	GROMMET
428-2371	[1]	GUARD AS
420-9415	[1]	HARNESS AS-REAR
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
110-8769	[1]	WIRE AS (16-GA)
114-8843 E		SLEEVE-PLASTIC (120-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
189-3158	[1]	SUPPRESSOR-ARC
423-6337	[1]	HOSE AS
423-6338	[1]	HOSE AS
333-1207	[1]	IDLER AS
423-7048	[1]	PLATE AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[1]	NUT-WELD (M12X1.75-THD)
425-4528	[1]	PLATE AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
190-3635	[1]	PULLEY (8-GROOVE)
9X-7381	[1]	SEAL-O-RING
9X-7382	[1]	SEAL-O-RING
9X-7383	[1]	SEAL-O-RING
9X-7384	[2]	SEAL-O-RING
9X-7385	[2]	SEAL-O-RING
9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
422-5479	[1]	TUBE
2G-8767	[2]	WASHER (10.5X60X3-MM THK)
7F-0560	[1]	WASHER (0.516X0.938X0.101-IN THK)
8U-4791	[2]	WASHER (11X21X8-MM THK)
9X-8267	[4]	WASHER (6.6X12X2-MM THK)
5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP63780024

462-6336: KIT-ENGINE

KIT-ENGINE

462-6336 KIT-ENGINE -UPGRADE
S/N B931-UP
FOR USE WITH REHS4297, ALL 24M B9K MACHINES TO UPGRADE TO THE B93 POWERTRAIN CONFIGURATIONS
FIELD INSTALLATION

i05871538 SEBP6378

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1602	[12]	BOLT (5/8-18X3.5-IN)
5P-3931	[1]	COMPOUND-ANTI-SEIZE (HIGH TEMPERATURE)
9Y-8386	[1]	GASKET
155-5619	[1]	GASKET (FLYWHEEL HOUSING)
4N-1156	[1]	GASKET-REGULATOR COVER
2N-2766	[12]	LOCKNUT (3/8-16-THD)
133-3359	[2]	MANIFOLD-EXHAUST
126-2702	[1]	SEAL-INTEGRAL
198-6068	[1]	SEAL-INTEGRAL
4M-0189	[2]	SEAL-O-RING
9X-7371	[1]	SEAL-O-RING
214-7566	[4]	SEAL-O-RING
238-5080	[4]	SEAL-O-RING
281-8261	[6]	SLEEVE AS-EXHAUST
108-3612	[12]	SPACER (11.13X19.05X53-MM THK)
106-1792	[12]	STUD-TAPERLOCK (3/8-16X4-IN)

#SEBP63780025

462-6338: KIT-ENGINE

KIT-ENGINE

462-6338 KIT-ENGINE -UPGRADE
S/N B931-UP
B9K REQUIRED COMPONENTS TO UPGRADE ENGINE TO B93 ENGINE
FOR USE WITH REHS4297, ALL 24M B9K MACHINES TO UPGRADE TO THE B93 POWERTRAIN CONFIGURATIONS
FIELD INSTALLATION

i05871360 SEBP6378

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
319-0785 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
9Y-6089	[1]	GASKET
225-4150	[1]	PLATE-SERVICE INFORMATION (MACHINE)
2P-2333	[1]	SEALANT
488-3003	[1]	SOFTWARE GP-ENGINE
488-3019	[1]	SOFTWARE GP-ENGINE
Y		SEPARATE ILLUSTRATION

#SEBP63780026

133-9907: ADAPTER GP-PUMP DRIVE

ADAPTER GP-PUMP DRIVE

133-9907 ADAPTER GP-PUMP DRIVE
S/N TXH1-UP
PART OF 6I-3638 DRIVE GP-PUMP
AN ATTACHMENT

i00506272 SEBP6378

1339907 ADAPTER GP-PUMP DRIVE Parts scheme

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-3867	[2]	BALL BEARING
2.	4F-7957	[3]	BOLT (1/4-20X0.875-IN)
3.	6I-4575	[1]	GEAR (34-TEETH)
4.	9X-2038	[3]	WASHER (7X19X2-MM THK)
5.	133-9906	[1]	ADAPTER
6.	1H-8647	[1]	RING-SNAP

#SEBP63780027

234-5005: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

234-5005 BASE GP-VALVE COVER & INJ HARN
S/N TXH1-UP
PART OF 371-3451 ENGINE AR-CORE
AN ATTACHMENT

i03854905 SEBP6378

2345005 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS
3.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
4.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
5.	123-3202	[9]	STRAP-CABLE
6.	419-3614	[1]	BASE-VALVE COVER
7.	326-4512 C	[6]	MOUNTING-CABLE TIE
8.	422-1761 CY	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537 C	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	272-0390	[1]	SEAL
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP63780028

436-7110: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

436-7110 BASE GP-VALVE COVER & INJ HARN
S/N TXH4230-UP
PART OF 436-9225 ENGINE AR-CORE
AN ATTACHMENT

i05316989 SEBP6378

4367110 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS
3.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
4.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
5.	123-3202 B	[9]	STRAP-CABLE
6.	326-4512	[6]	MOUNTING-CABLE TIE
7.	419-3614	[1]	BASE-VALVE COVER
8.	422-1761 Y	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	272-0390	[1]	SEAL
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION