AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

431-0455 LINES GP-BUCKET CYLINDER S/N WDC1-UP; YCF1-UP PART OF 422-7081 STICK AR-HOE FOR USE WITH 2.9-M (9.5-FT) STICK AN ATTACHMENT 336D2


HYDRAULIC SYSTEM
LINES GP-BUCKET
LINES GP-COUPLER
LINES GP-FRONT

EXCAVATOR 336D2 EXCAVATOR WDC
 336D2 & 336D2 L Excavators WDC00001-UP (MACHINE) POWERED BY C9 Engine SEBP6528 336D2 WDC   (2013)

HYDRAULIC SYSTEM

LINES GP-BUCKET
225-4579 CYLINDER & LINES GP-BUCKET
234-4602 CYLINDER & LINES GP-BUCKET
289-8010 CYLINDER & LINES GP-BUCKET
357-9764 CYLINDER & LINES GP-BUCKET
357-9782 CYLINDER & LINES GP-BUCKET
369-9688 CYLINDER & LINES GP-BUCKET
369-9689 CYLINDER & LINES GP-BUCKET
LINES GP-BUCKET CYLINDER
115-8694 LINES GP-BUCKET CYLINDER
LINES GP-BUCKET CYLINDER
239-1627 LINES GP-BUCKET CYLINDER
LINES GP-BUCKET CYLINDER
431-0455 LINES GP-BUCKET CYLINDER
 

#SEBP65280500
 

431-0455: LINES GP-BUCKET CYLINDER

431-0455 LINES GP-BUCKET CYLINDER
S/N WDC1-UP; YCF1-UP
PART OF 422-7081 STICK AR-HOE
FOR USE WITH 2.9-M (9.5-FT) STICK
AN ATTACHMENT
i05271357 SEBP6528
4310455 LINES GP-BUCKET CYLINDER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-8785 I [1] HOSE AS  
2. 5I-4216 I [1] HOSE AS  
3. 289-5690 [1] FLANGE-SPECIAL  
4. 1P-3702 [1] SEAL-RECTANGULAR  
5. 1P-3703 [2] SEAL-RECTANGULAR  
6. 6V-0400 [2] FLANGE-HALF  
7. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
10. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-9403 [2] FLANGE-HALF  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65280501
 

237-3194: LINES GP-COUPLER

237-3194 LINES GP-COUPLER -REACH BOOM
S/N WDC1-UP; YCF1-UP
AN ATTACHMENT
i05417761 SEBP6528
2373194 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [14] BOLT (M12X1.75X30-MM)  
2. 7X-2550 CM [2] BOLT (M12X1.75X110-MM)  
3. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
4. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
5. 179-5235 [6] CLIP  
6. 253-6444 [8] CLIP  
7. 135-3980 [2] CLIP  
8. 5Q-4212 [4] CLIP  
9. 8T-4244 M [18] NUT (M12X1.75-THD)  
10. 157-9338 C [1] PLATE  
11. 6V-8398 [8] SEAL-O-RING  
12. 253-6635 [2] SUPPORT AS  
13. 316-3915 C [1] TUBE AS  
14. 288-7643 [1] TUBE AS  
15. 316-3918 C [1] TUBE AS  
16. 245-2223 [1] TUBE AS  
17. 288-7646 [1] TUBE AS  
18. 245-2294 [1] TUBE AS  
19. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP65280502
 

237-3198: LINES GP-COUPLER

237-3198 LINES GP-COUPLER -MASS BOOM
S/N WDC1-UP; YCF1-UP
AN ATTACHMENT
i05418036 SEBP6528
2373198 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5041 CM [2] BOLT (M12X1.75X120-MM)  
2. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
3. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
4. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
5. 179-5235 [4] CLIP  
6. 253-6444 [8] CLIP  
7. 135-3980 [2] CLIP  
8. 5Q-4212 [4] CLIP  
9. 8T-4244 M [16] NUT (M12X1.75-THD)  
10. 286-4106 C [1] PLATE  
11. 6V-8398 [8] SEAL-O-RING  
12. 253-6635 [2] SUPPORT AS  
13. 318-5883 C [1] TUBE AS  
14. 318-5884 C [1] TUBE AS  
15. 262-3213 [1] TUBE AS  
16. 262-3216 [1] TUBE AS  
17. 262-3219 [1] TUBE AS  
18. 262-3222 [1] TUBE AS  
19. 8T-4223 [22] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP65280503
 

253-6495: LINES GP-COUPLER

253-6495 LINES GP-COUPLER
S/N WDC1-UP; YCF1-UP
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
i05418715 SEBP6528
2536495 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6582 [1] NUT (13/16-16-THD)  
2. 253-6548 [1] TUBE AS  
3. 253-6551 [1] TUBE AS  
4. 253-6554 I [2] HOSE AS  
5. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
6. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
7. 5Q-4212 [12] CLIP  
8. 6V-8398 [4] SEAL-O-RING  
9. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4956 M [12] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65280504
 

253-6501: LINES GP-COUPLER

253-6501 LINES GP-COUPLER
S/N WDC1-UP; YCF1-UP
FOR USE WITH 2.55-M (8.69-FT) STICK
AN ATTACHMENT
i05418726 SEBP6528
2536501 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6582 [1] NUT (13/16-16-THD)  
2. 382-7079 I [2] HOSE AS  
3. 253-6688 [1] TUBE AS  
4. 253-6691 [1] TUBE AS  
5. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
6. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
7. 5Q-4212 [12] CLIP  
8. 6V-8398 [4] SEAL-O-RING  
9. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4956 M [12] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65280505
 

253-6609: LINES GP-COUPLER

253-6609 LINES GP-COUPLER
S/N WDC1-UP; YCF1-UP
FOR USE WITH 2.15-M (7.1-FT) STICK
AN ATTACHMENT
i05418786 SEBP6528
2536609 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6582 [1] NUT (13/16-16-THD)  
2. 177-8407 I [2] HOSE AS  
3. 262-3152 [1] TUBE AS  
4. 262-3155 [1] TUBE AS  
5. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
6. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
7. 5Q-4212 [8] CLIP  
8. 6V-8398 [4] SEAL-O-RING  
9. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65280506
 

255-1919: LINES GP-FRONT

255-1919 LINES GP-FRONT -SYSTEM 2, COMBINED FUNCTION
S/N WDC1-UP; YCF1-UP
PART OF 434-5222, 466-9015 CONTROL AR-AUXILIARY
AN ATTACHMENT
i03027864 SEBP6528
2551919 LINES GP-FRONT Parts scheme 2551919 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-3729 [1] FLANGE-SPECIAL  
2. 7Y-3731 H [1] FLANGE  
3. 105-3477 M [6] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
4. 141-1313 HI [1] HOSE AS  
5. 177-2653 Y [1] VALVE GP-RELIEF (LINE)(1-WAY/2-WAY)  
6. 184-9508 I [1] HOSE AS  
7. 187-5854 H [1] BLOCK  
8. 187-5855 H [1] FLANGE  
10. 207-6443 HI [1] HOSE AS  
11. 297-0370 CY [2] VALVE GP-CHECK (1-WAY/2-WAY, CHECK)  
12. 218-1139 [1] BLOCK  
13. 255-1892 H [1] SUPPORT  
14. 255-1894 [1] SUPPORT  
15. 260-7959 [2] BRACKET  
16. 260-8030 [1] SUPPORT  
17. 260-8098 [1] SUPPORT  
18. 266-0953 [1] BLOCK  
19. 266-1278 [1] BLOCK  
20. 266-1279 [2] FLANGE  
21. 266-1303 I [1] HOSE AS  
22. 275-1384 I [1] HOSE AS  
23. 275-1439 [1] BLOCK  
24. 275-1440 [1] BLOCK  
25. 275-1540 [1] BLOCK  
26. 275-1541 I [1] HOSE AS  
27. 275-1545 I [1] HOSE AS  
28. 099-8232 [1] SEAL-O-RING  
29. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
30. 101-7402 HM [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
31. 101-7404 HM [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
32. 108-4282 M [4] BOLT-SOCKET HEAD (M10X1.5X100-MM)  
33. 148-8330 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-0198 [1] CONNECTOR  
34. 148-8335 H [2] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
35. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
36. 148-8411 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
37. 148-8442 [1] TEE AS  
  6V-9746 [2] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-1685 [1] TEE  
38. 153-6237 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9004 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
39. 164-5574 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8784 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
40. 164-5606 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  8T-0078 [1] CONNECTOR  
41. 1P-3702 [6] SEAL-RECTANGULAR  
42. 1P-3703 H [5] SEAL-RECTANGULAR  
43. 1P-4578 H [2] FLANGE-HALF  
44. 280-2747 M [4] BOLT-SOCKET HEAD (M10X1.5X60-MM)  
45. 330-2448 [1] ELBOW AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  199-1773 [1] ELBOW  
46. 4J-0522 H [1] SEAL-O-RING  
47. 5K-9090 H [1] SEAL-O-RING  
48. 5P-7468 H [2] CLIP (SLOT)  
49. 5P-7469 H [2] CLIP (TAB)  
50. 6V-0545 H [2] GROMMET  
52. 6V-9746 [1] SEAL-O-RING  
53. 8T-4121 H [6] WASHER-HARD (11X21X2.5-MM THK)  
54. 8T-4136 HM [2] BOLT (M10X1.5X25-MM)  
55. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
56. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
57. 8T-4178 HM [4] BOLT (M10X1.5X90-MM)  
58. 8T-4223 H [30] WASHER-HARD (13.5X25.5X3-MM THK)  
59. 8T-4956 HM [8] BOLT (M12X1.75X35-MM)  
60. 8T-5092 M [8] BOLT (M12X1.75X150-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  H   NOT REQUIRED WHEN USE WITH LINES GP-FRONT(HAMMER RETURN)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP65280507
 

255-1920: LINES GP-FRONT

255-1920 LINES GP-FRONT -SYSTEM 3, 1-WAY, 2-PUMP
S/N WDC1-UP; YCF1-UP
PART OF 434-5220 CONTROL AR-AUXILIARY
AN ATTACHMENT
i05338952 SEBP6528
2551920 LINES GP-FRONT Parts scheme 2551920 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-3731 J [1] FLANGE  
2. 105-3477 M [4] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
3. 141-1313 JI [1] HOSE AS  
4. 177-2653 Y [1] VALVE GP-RELIEF (LINE)  
5. 187-5853 [1] BLOCK  
6. 330-2448 [1] ELBOW AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  199-1773 [1] ELBOW  
7. 207-6443 JI [1] HOSE AS  
8. 212-5148 [1] BLOCK  
9. 218-1139 [1] BLOCK  
10. 255-1892 J [1] SUPPORT  
11. 255-1894 [1] SUPPORT  
12. 255-1936 [1] BLOCK  
13. 260-7959 [2] BRACKET  
14. 260-8030 [1] SUPPORT  
15. 260-8098 [1] SUPPORT  
16. 266-1278 [1] BLOCK  
17. 266-1279 [1] FLANGE  
18. 266-1303 I [1] HOSE AS  
19. 275-1384 I [1] HOSE AS  
20. 275-1439 [1] BLOCK  
21. 099-8232 [1] SEAL-O-RING  
22. 101-7401 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
23. 101-7404 JM [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
24. 148-8330 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-0198 [1] CONNECTOR  
25. 148-8335 J [2] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
26. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
27. 148-8411 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
28. 153-6237 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9004 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
29. 369-6858 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  360-3697 [1] PLUG  
30. 1P-3702 [3] SEAL-RECTANGULAR  
31. 1P-3703 J [3] SEAL-RECTANGULAR  
32. 1P-4578 [2] FLANGE-HALF  
33. 5P-7469 C [2] CLIP (TAB)  
34. 4J-0522 J [1] SEAL-O-RING  
35. 5K-9090 J [1] SEAL-O-RING  
36. 5P-7468 C [2] CLIP (SLOT)  
37. 6V-0545 C [2] GROMMET (52-MM OD)  
38. 8T-4121 J [6] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 JM [2] BOLT (M10X1.5X25-MM)  
40. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
41. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
42. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
43. 8T-4223 J [30] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4956 JM [8] BOLT (M12X1.75X35-MM)  
45. 8T-5092 M [8] BOLT (M12X1.75X150-MM)  
46. 280-2747 M [4] BOLT-SOCKET HEAD (M10X1.5X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   NOT REQUIRED WHEN USED WITH LINES GP-FRONT(HAMMER RETURN)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP65280508
 

255-1925: LINES GP-FRONT

255-1925 LINES GP-FRONT -SYSTEM 11, COMBINED FN, MED PR
S/N WDC1-UP; YCF1-UP
PART OF 434-5222, 466-9015 CONTROL AR-AUXILIARY
AN ATTACHMENT
i05419011 SEBP6528
2551925 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 187-7109 [1] TUBE AS  
2. 204-8505 I [2] HOSE AS  
3. 270-0020 [1] SUPPORT AS  
4. 153-8867 [2] CLIP  
5. 187-7108 [1] TUBE AS  
6. 6V-8398 [2] SEAL-O-RING  
7. 6V-9746 [2] SEAL-O-RING  
8. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65280509
 

260-7869: LINES GP-FRONT

260-7869 LINES GP-FRONT -IMPL, SWING, TRAVEL, WORK TOOL
S/N WDC1-UP; YCF1-UP
PART OF 434-5322, 434-5323 HYDRAULIC AR
ALSO AN ATTACHMENT
i04374427 SEBP6528
2607869 LINES GP-FRONT Parts scheme 2607869 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-3730 [2] FLANGE-SPECIAL  
2. 087-4932 I [1] HOSE AS  
3. 087-4935 I [1] HOSE AS  
4. 101-7403 M [2] BOLT-SOCKET HEAD (M10X1.5X80-MM)  
5. 105-3477 M [8] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
6. 105-3483 M [2] BOLT-SOCKET HEAD (M10X1.5X70-MM)  
7. 113-6479 [2] FLANGE-SPECIAL  
8. 337-1165 I [1] HOSE AS  
9. 366-8593 C [1] HOSE AS  
10. 319-9702 I [1] HOSE AS  
11. 194-0115 [2] TUBE AS  
12. 363-6200 CY [1] HOSE GP-HYDRAULIC (CONTROL VALVE, STICK)  
13. 363-6203 CY [1] HOSE GP-HYDRAULIC (CONTROL VALVE, STICK)  
14. 363-6206 CY [1] HOSE GP-HYDRAULIC (CONTROL VALVE, BOOM)  
16. 218-1128 [1] TUBE AS  
17. 337-1161 I [1] HOSE AS  
18. 255-1745 I [1] HOSE AS  
19. 255-1749 I [1] HOSE AS  
20. 337-1157 I [1] HOSE AS  
21. 255-5680 Y [1] VALVE GP-LOAD CONTROL (STICK DRIFT RED, LINE RELIEF)  
22. 255-5683 Y [1] VALVE GP-LOAD CONTROL (BOOM DRIFT RED, LINE RELIEF)  
23. 260-8197 I [1] HOSE AS  
24. 101-7397 CM [12] BOLT-SOCKET HEAD (M12X1.75X50-MM)  
25. 101-7404 CM [30] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
26. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
28. 199-1286 M [6] BOLT-SOCKET HEAD (M10X1.5X150-MM)  
29. 1P-3702 [4] SEAL-RECTANGULAR  
30. 1P-3703 [11] SEAL-RECTANGULAR  
31. 1P-3704 C [4] SEAL-RECTANGULAR  
33. 1P-5767 C [6] FLANGE-HALF  
34. 4J-5267 [10] SEAL-O-RING  
35. 4J-5268 [1] SEAL-O-RING  
36. 5K-9090 [4] SEAL-O-RING  
38. 6V-0400 [8] FLANGE-HALF  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4194 M [16] BOLT (M12X1.75X50-MM)  
42. 8T-4223 C [28] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-9403 [4] FLANGE-HALF  
45. 113-2004 M [4] BOLT-SOCKET HEAD (M12X1.75X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 336D2 :

LINES GP-BUCKET CYLINDER
239-1627 LINES GP-BUCKET CYLINDER
LINES GP-BUCKET CYLINDER
115-8694 LINES GP-BUCKET CYLINDER
LINES GP-BOOM CYLINDER
387-9382 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
387-9380 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
260-7870 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
192-6909 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
192-6908 LINES GP-BOOM CYLINDER
LINES GP-BOOM
260-7871 LINES GP-BOOM
LINES GP-COUPLER
237-3194 LINES GP-COUPLER
LINES GP-COUPLER
237-3198 LINES GP-COUPLER
LINES GP-COUPLER
253-6495 LINES GP-COUPLER
LINES GP-COUPLER
253-6501 LINES GP-COUPLER
LINES GP-COUPLER
253-6609 LINES GP-COUPLER
LINES GP-FRONT
255-1919 LINES GP-FRONT
LINES GP-FRONT
255-1920 LINES GP-FRONT
LINES GP-FRONT
255-1925 LINES GP-FRONT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.