ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP65470500
524-0532: SENSOR & MTG GP-POSITION
524-0532 SENSOR & MTG GP-POSITION
S/N KEA10001-UP
PART OF 497-9660 GRADE CONTROL AR
S/N KEA10001-UP
PART OF 497-9660 GRADE CONTROL AR
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-0755 | [1] | SENSOR AS-ANGLE (BODY TILT) | |
| 493-6777 | [1] | SOFTWARE GP-MONITOR (ANGLE SENSOR) | ||
| 2. | 524-0533 | [1] | BRACKET AS | |
| 3. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 4. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 5. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP65470501
524-2234: SENSOR & MTG GP-POSITION
524-2234 SENSOR & MTG GP-POSITION -BUCKET
S/N KEA20001-UP
GRADE CONTROL
PART OF 527-0575, 527-0576 STICK AR-REACH
S/N KEA20001-UP
GRADE CONTROL
PART OF 527-0575, 527-0576 STICK AR-REACH
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 478-4873 | [1] | SENSOR-POSITION (BUCKET) | |
| 3. | 478-4876 | [1] | SENSOR GP-POSITION (BUCKET) | |
| 4. | 575-1483 | [1] | COVER AS-ACCESS | |
| 5. | 136-4192 M | [5] | BOLT (M6X1X35-MM) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 9. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 10. | 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 11. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 13. | 3E-6600 E | SEAL (1.5-CM EACH) | ||
| 14. | 575-4554 | [3] | PLATE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP65470502
415-8038: SENSOR & MTG GP-PRESSURE
415-8038 SENSOR & MTG GP-PRESSURE
S/N KEA1-UP
PART OF 394-5366, 469-6268 MODULE AR-CLEAN EMISSIONS
S/N KEA1-UP
PART OF 394-5366, 469-6268 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0472 | [2] | ADAPTER | |
| 2. | 127-1991 | [3] | SPACER (8.2X13X15-MM THK) | |
| 3. | 385-5773 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5P-1046 | [1] | CONNECTOR | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 4. | 415-2415 | [2] | HOSE-AIR | |
| 5. | 415-8039 | [1] | TUBE AS | |
| 6. | 415-8040 | [1] | TUBE AS | |
| 7. | 415-8044 Y | [1] | SENSOR GP-PRESSURE (DPF DIFFERENTIAL) | |
| 8. | 415-8049 | [1] | BRACKET | |
| 9. | 124-6275 | [4] | CLAMP-HOSE | |
| 10. | 204-0813 | [3] | BOLT (M6X1X40-MM) | |
| 11. | 344-1200 | [5] | WASHER-HARD (6.6X12X2-MM THK) | |
| 12. | 344-1206 M | [2] | BOLT (M6X1X16-MM) | |
| 13. | 7W-3556 | [2] | WASHER (14.27X20.57X1.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP65470503
385-1300: SENSOR & MTG GP-SOOT
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 096-2916 | [1] | GROMMET | |
| 4. | 326-4516 | [12] | TIE-CABLE | |
| 5. | 441-5127 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 6. | 441-5128 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT) | |
| 7. | 393-4008 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 396-6211 | [1] | GROMMET | |
| 9. | 418-0728 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 10. | 101-3625 | [4] | CLIP (LADDER) | |
| 11. | 285-6393 | [7] | CLIP | |
| 12. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 13. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [9] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 17. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP65470504
418-9617: SENSOR GP-ENGINE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 178-1781 | [1] | CLIP | |
| 3. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 4. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CHARGE AIR) | |
| 5. | 293-5535 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 300-9806 Y | [1] | SENSOR GP-SPEED (ENGINE SPEED) | |
| 7. | 330-9740 | [1] | ADAPTER AS | |
| 214-7566 | [1] | SEAL-O-RING | ||
| 330-9739 | [1] | ADAPTER | ||
| 8. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 9. | 331-1135 Y | [1] | SENSOR GP-PRESSURE (INTAKE MANIFOLD) | |
| 10. | 332-0296 Y | [1] | SENSOR GP-PRESSURE (NRS) | |
| 11. | 474-3231 | [1] | SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM) | |
| 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 12. | 443-4151 | [1] | BRACKET | |
| 13. | 384-1836 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 14. | 385-1173 Y | [1] | SENSOR GP-PRESSURE (NRS DIFFERENTIAL) | |
| 15. | 421-8565 | [1] | BRACKET | |
| 16. | 7W-9094 | [1] | SPACER (11X20X9-MM THK) | |
| 17. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 18. | 285-6395 | [1] | CLIP (LADDER) | |
| 19. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 20. | 307-2673 | [1] | PLUG AS | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 21. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 22. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 23. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 24. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP65470505
423-6434: SENSOR GP-LIQUID LEVEL
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65470506
344-4514: SENSOR GP-MACHINE LEVEL
344-4514 SENSOR GP-MACHINE LEVEL
S/N KEA1-UP
PART OF 500-0695, 505-4694, 509-7756, 517-1609, 528-6969, 565-5584 DISTRIBUTION AR, 501-7246 OPTION AR-REGIONAL
S/N KEA1-UP
PART OF 500-0695, 505-4694, 509-7756, 517-1609, 528-6969, 565-5584 DISTRIBUTION AR, 501-7246 OPTION AR-REGIONAL
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65470507
345-1948: SENSOR GP-POSITION
345-1948 SENSOR GP-POSITION
S/N KEA1-UP
PART OF 327-7477, 327-7478 SENSOR & MTG GP-POSITION
S/N KEA1-UP
PART OF 327-7477, 327-7478 SENSOR & MTG GP-POSITION
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65470508
293-5535: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-6719 | [1] | SENSOR GP-PRESSURE | |
| 2. | 298-7202 | [1] | HARNESS AS-SENSOR | |
| 9X-1386 E | SLEEVE (23-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 237-0228 | [1] | RECEPTACLE AS-CONNECTOR | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP65470509
325-7472: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 320-3061 | [1] | SENSOR GP-PRESSURE | |
| 2. | 327-5221 | [1] | HARNESS AS-SENSOR | |
| 9X-1813 E | SLEEVE (23-CM) | |||
| 180-9339 | [3] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 281-8804 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 3. | 108-1304 E | TUBE-HEAT SHRINK (33-MM DIA)(4-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Instructions for Installing Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Machine Guidance Upgrades For Cat<SUP>®</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Installation Procedure for the <NOBR>451-6711</NOBR> Hydraulic Option Ar (Tool Control with Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the451-6711 Hydraulic Option Ar (Tool Control with Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the
Installation Procedure for the <NOBR>451-6709</NOBR> Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the451-6709 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Position Sensor and Mounting - Body Tilt Sensor
349F and 352F Excavators Machine System Specifications
349F and 352F Excavators Machine System Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
Service Letter-Asia
Systems Operation
Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
Troubleshooting
Disassembly and Assembly
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engine for Caterpillar Built Machines
C13 Engine for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C13 Engine for Caterpillar Built Machines
C13 Engine for Caterpillar Built Machines
Service Magazine
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
