415-6052 HARNESS AS-CONTROL -LOAD SHARE S/N SEK1-UP PART OF 421-8248, 421-8249 CONTROL GP-LOAD SHARE MODULE AN ATTACHMENT 3516C

Part No	Qty	Parts name
8T-8737	[3]	PLUG-SEAL
125-9997	[7]	TERMINAL-FORK (16-GA TO 22-GA, NO. 6 SCREW)
2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
190-7614	[1]	KIT-RECEPTACLE (12-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)

#SEBP66780691

415-6060: HARNESS AS-CONTROL

HARNESS AS-CONTROL

415-6060 HARNESS AS-CONTROL
S/N SEK1-UP
PART OF 421-8247 WIRING GP-CONTROL
AN ATTACHMENT

i05162056 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8806	[1]	KIT-RECEPTACLE (8-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
112-7497	[4]	END-WIRE (14-GA)
110-8714	[4]	END-WIRE (18-GA)
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM)
5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER

#SEBP66780692

415-6061: HARNESS AS-CONTROL

HARNESS AS-CONTROL

415-6061 HARNESS AS-CONTROL -RESISTOR
S/N SEK1-UP
PART OF 421-8247 WIRING GP-CONTROL
AN ATTACHMENT

i05162066 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
109-3038	[2]	END-WIRE (16-GA)
110-8714	[2]	END-WIRE (18-GA)
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM)
9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
E		ORDER BY THE CENTIMETER

#SEBP66780693

341-0604: HARNESS AS-ENGINE

HARNESS AS-ENGINE

341-0604 HARNESS AS-ENGINE
S/N DD51-UP
PART OF 274-3695 WIRING GP-ENGINE

i07519682 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
6I-4348	[1]	BOOT (40-PIN)
110-6170	[1]	BUSHING (CAPPED)
4P-6748	[1]	BUSHING-TERMINAL
8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
374-7464	[2]	CAP-SEAL
374-7466	[2]	CAP-SEAL
374-7467	[1]	CAP-SEAL
9X-3467	[1]	CAP-PLUG
3T-3048	[1]	CLIP AS
7K-4475	[5]	CONNECTOR AS
123-0316	[1]	DIODE AS
276-1380	[1]	FITTING-ELBOW
7N-9737	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
7N-9738	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
155-2270	[22]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
102-8802	[4]	KIT-RECEPTACLE (2-PIN)
		(EACH INCLUDES RECEPTACLE AS & WEDGE)
155-2260	[7]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL)
062-5388	[1]	LOCKNUT (1-11-1/2-THD)
263-6463 M	[1]	NUT (M20X1.5-THD)
8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
7N-7780	[1]	PIN-CONNECTOR (14-GA TO 18-GA)
8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
147-1443	[1]	PLUG AS-CONNECTOR (70-PIN)
159-9322	[1]	SEAL-O-RING
160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
159-9322	[1]	SEAL-O-RING
174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
230-4013	[5]	PLUG AS-CONNECTOR (3-PIN)
		(EACH INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
237-0227	[4]	PLUG AS-CONNECTOR (3-PIN)
		(EACH INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
8T-8737	[56]	PLUG-SEAL
133-0970	[1]	RECEPTACLE AS-CONNECTOR (TEE)
8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
7N-7779	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
8T-8730	[233]	SOCKET-CONNECTOR (16-GA TO 18-GA)
126-1768	[16]	SOCKET-CONNECTOR (14-GA TO 16-GA)
090-4715	[1]	TERMINAL-RING (18-GA TO 22-GA, 1/4-IN SCREW)
9G-9435	[1]	TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)
2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
2L-8049	[2]	TERMINAL-RING (6-GA, NO. 10 SCREW)
		-OR-
2L-8057	[2]	TERMINAL-RING (8-GA, NO. 10 SCREW)
2L-8052	[2]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
		-OR-
2L-8060	[2]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
2L-8067	[4]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
		-OR-
2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
8T-6342 E		TUBE-HEAT SHRINK (3.2-MM DIA)(53-CM)
9X-8243 E		TUBE-HEAT SHRINK (39.9-MM DIA)(13-CM)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM)
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(30-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
E		ORDER BY THE CENTIMETER
M		METRIC PART

#SEBP66780694

415-6050: HARNESS AS-ENGINE

HARNESS AS-ENGINE

415-6050 HARNESS AS-ENGINE
S/N SEK1-UP
PART OF 415-6068 WIRING GP-ENGINE
AN ATTACHMENT

i05410609 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8806	[2]	KIT-RECEPTACLE (8-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.9-M)
8T-8737	[25]	PLUG-SEAL
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(45-CM)
9X-3402	[27]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[27]	SOCKET-CONNECTOR (14-GA TO 16-GA)
2L-8081	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
		(EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER

#SEBP66780695

415-6054: HARNESS AS-ENGINE

HARNESS AS-ENGINE

415-6054 HARNESS AS-ENGINE -MAIN
S/N SEK1-UP
PART OF 415-6068 WIRING GP-ENGINE
FOR USE WITH EUI
AN ATTACHMENT

i05410630 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.6-M)
8T-8737	[34]	PLUG-SEAL
9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(72-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(125-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(30-CM)
9X-3402	[154]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[154]	SOCKET-CONNECTOR (14-GA TO 16-GA)
9X-3401	[36]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[36]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
160-7689	[2]	PLUG AS-CONNECTOR (70-PIN)
		(EACH INCLUDES)
159-9322	[1]	SEAL-O-RING
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
190-7614	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
234-1857	[1]	PLUG-CONNECTOR (9-PIN)
234-1858	[1]	PLUG-CONNECTOR (12-PIN)
244-0452	[21]	END-WIRE (14-GA TO 20-GA)
246-7014	[1]	SEAL (9-POSITION)
246-7015	[1]	SEAL (12-POSITION)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER

#SEBP66780696

415-6059: HARNESS AS-ENGINE

HARNESS AS-ENGINE

415-6059 HARNESS AS-ENGINE -JUMPER
S/N SEK1-UP
PART OF 415-6068 WIRING GP-ENGINE
AN ATTACHMENT

i05410675 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
244-0452	[6]	END-WIRE (14-GA TO 20-GA)
9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
234-1856	[1]	PLUG-CONNECTOR (6-PIN)
246-7013	[1]	SEAL (6-POSITION)

#SEBP66780697

439-5109: HARNESS AS-ENGINE

HARNESS AS-ENGINE

439-5109 HARNESS AS-ENGINE
S/N SEK1-UP
CURRENT SENSING, VOLTAGE SENSING
PART OF 439-5110 WIRING GP-GENERATOR
AN ATTACHMENT

i05419972 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
2L-8081	[4]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
9X-3402	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[15]	SOCKET-CONNECTOR (14-GA TO 16-GA)
2L-8075	[8]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
E		ORDER BY THE CENTIMETER

#SEBP66780698

441-6501: HARNESS AS-ENGINE

HARNESS AS-ENGINE

441-6501 HARNESS AS-ENGINE -MEDIUM VOLTAGE
S/N SEK1-UP
PART OF 441-6500, 441-6504, 449-4760 WIRING GP-GENERATOR
AN ATTACHMENT

i05729338 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-9593	[8]	STRAP-CABLE
2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
2L-8077	[5]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
2L-8081	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)

#SEBP66780699

441-6505: HARNESS AS-ENGINE

HARNESS AS-ENGINE

441-6505 HARNESS AS-ENGINE
S/N SEK1-UP
MUI-EMCP 4.2
PART OF 441-6504, 449-4760 WIRING GP-GENERATOR
AN ATTACHMENT

i05729342 SEBP6678

For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
8T-8737	[2]	PLUG-SEAL
230-5011	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
1S-9593	[8]	STRAP-CABLE
2L-8077	[5]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)