395-4132 TRIM GP-CAB -EXTERIOR S/N K3D1-UP PART OF 383-4065, 383-4067 CAB GP AN ATTACHMENT M313D WHEELED EXCAVATOR

OPERATOR STATION

CAB GP

0. 395-4132 TRIM GP-CA
1. 344-5438 VISOR GP-C

WINDOW GP

2. 262-7933 WINDOW GP-
3. 282-6535 WINDOW GP-
4. 344-5432 WINDOW GP-
5. 344-5432 WINDOW GP-
6. 395-3432 WINDOW GP-

WIPER GP-WINDOW

7. 287-7534 WIPER GP-W
8. 361-3462 WIPER GP-W
9. 361-3463 WIPER GP-W
0. INFORMATION

WHEELED EXCAVATOR M313D WHEELED EXCAVATOR K3D
M313D Excavator K3D00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6801 M313D K3D (2013)

OPERATOR STATION

CAB GP

344-5429 TRIM GP-CAB

352-3227 TRIM GP-CAB

395-4132 TRIM GP-CAB

344-5438 VISOR GP-CAB

#SEBP68010770

395-4132: TRIM GP-CAB

TRIM GP-CAB

395-4132 TRIM GP-CAB -EXTERIOR
S/N K3D1-UP
PART OF 383-4065, 383-4067 CAB GP
AN ATTACHMENT

i05195005 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1206	[2]	GUIDE
2.	5J-5003	[9]	PLUG
3.	120-4831	[1]	WASHER (18.5X32X1.5-MM THK)
4.	154-4811	[1]	SPACER-SPECIAL
5.	161-3685	[1]	ROD
6.	164-0527	[1]	ROD
7.	164-0528 Y	[1]	LEVER GP-CAB DOOR
8.	167-4146	[1]	SUPPORT AS
9.	167-4148	[1]	LEVER
10.	171-7426	[1]	CABLE AS
11.	176-1939	[1]	LEVER AS
	9X-2044 M	[1]	SCREW-TRUSS HEAD (M6X1X16-MM)
	176-1937	[1]	BRACKET AS
	176-1938	[1]	LEVER
12.	205-0453	[1]	BRACKET
13.	205-6203	[1]	GUARD
14.	205-6295	[1]	LATCH AS
15.	217-0559	[1]	SEAL-WEATHER
16.	247-6801	[1]	COVER AS
17.	262-7954	[2]	BUMPER
18.	284-4426 M	[1]	BOLT-WING (M8X1.25X15-MM)
19.	293-1183	[1]	FILTER GP-CAB AIR
	293-1184	[1]	FILTER ELEMENT-CAB AIR
20.	315-5313	[1]	COVER
21.	378-6582	[1]	STUD
22.	378-6583	[1]	BRACKET
23.	378-6585	[1]	PLATE
24.	111-4627 M	[2]	SCREW-MACHINE (M6X1X30-MM)
25.	119-8353	[1]	SCREW-SPECIAL
26.	120-5737	[6]	WASHER (17.5X40X4-MM THK)
27.	120-5738	[6]	WASHER-RUBBER (14.5X40X2-MM THK)
28.	129-3180 M	[2]	LOCKNUT (M12X1.75-THD)
29.	129-5167 M	[3]	SCREW (M6X1X8-MM)
30.	161-3660	[1]	BRACKET AS
31.	176-1996	[2]	CLIP
32.	347-3244	[1]	PLUG-FITTING
33.	4I-3063	[1]	SPRING
34.	4I-4392	[3]	CLIP
35.	6C-4000	[2]	SHIM (1-MM THK)
36.	3F-9556	[3]	LOCKWASHER
37.	6V-7357 M	[4]	BOLT (M6X1X25-MM)
38.	6V-7636	[4]	PIN AS-SPRING
39.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[3]	NUT (M10X1.5-THD)
41.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
42.	8T-4190 M	[6]	BOLT (M16X2X25-MM)
43.	8T-4192 M	[4]	BOLT (M12X1.75X25-MM)
44.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
45.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
46.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
47.	9M-0057	[6]	WASHER-RUBBER (1.188X0.5X0.062-IN THK)
48.	9X-2044 M	[8]	SCREW-TRUSS HEAD (M6X1X16-MM)
49.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
50.	9X-2128 E		SEAL (61.8-CM EACH)
50A.	9X-2128 E		SEAL (9-CM EACH)
51.	133-3234 E		SEAL (71-CM)
52.	3T-0852 M	[2]	LOCKNUT (M8X1.25-THD)
53.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
54.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
55.	286-9521	[2]	GROMMET
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68010771

344-5438: VISOR GP-CAB

VISOR GP-CAB

344-5438 VISOR GP-CAB
S/N K3D1-UP
PART OF 383-4067 CAB GP
CANNOT BE USED WITH GUARD AR-FOGS
AN ATTACHMENT

i03698890 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6C-9089	[5]	NUT-CAP
2.	167-4196	[1]	BRACKET
3.	167-4197	[1]	BRACKET
4.	345-1634	[1]	VISOR
5.	129-3178 M	[5]	LOCKNUT (M6X1-THD)
6.	6C-9130	[16]	WASHER (6X18X1-MM THK)
7.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
8.	3E-8020 M	[1]	SCREW-TRUSS HEAD (M6X1X25-MM)
9.	286-9521	[1]	GROMMET
	M		METRIC PART

#SEBP68010772

262-7933: WINDOW GP-CAB

WINDOW GP-CAB

262-7933 WINDOW GP-CAB -1-PIECE, FRONT
S/N K3D1-UP
HEAT RESISTANT GLASS
PART OF 383-4065 CAB GP
AN ATTACHMENT

i02610009 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	096-6166	[1]	WASHER-HARD (4.5X9X1-MM THK)
2.	167-4183	[6]	BRACKET
3.	191-2757	[3]	BRACKET
4.	191-2758	[3]	BRACKET
5.	198-1754	[6]	HOOK
6.	204-6101	[6]	WASHER-HARD (5.3X10X1-MM THK)
7.	220-4080	[12]	SCREW
8.	262-7934	[1]	GLASS
9.	6J-6478	[12]	WASHER (0.28X0.63X0.13-IN THK)
10.	6V-9673 M	[6]	SCREW-MACHINE (M5X0.8X12-MM)
11.	8T-0337 M	[1]	SCREW-MACHINE (M4X0.7X12-MM)
12.	9X-2044 M	[12]	SCREW-TRUSS HEAD (M6X1X16-MM)
13.	262-7935 E		SEAL (450-CM)
14.	262-7961	[1]	PLATE
15.	262-7962	[1]	PLATE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP68010773

282-6535: WINDOW GP-CAB

WINDOW GP-CAB

282-6535 WINDOW GP-CAB -FRONT WINDOW, 70/30-SPLIT
S/N K3D1-UP
PART OF 395-3432 WINDOW GP-CAB
AN ATTACHMENT

i02610235 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6C-9037	[2]	CATCH
2.	167-4062	[4]	RING-RETAINING
3.	167-4063 M	[30]	SCREW (M4X0.7X20-MM)
4.	167-4130	[1]	SUPPORT AS (RH)
5.	167-4131	[1]	SUPPORT AS (LH)
6.	167-4181	[2]	SPRING
7.	175-1198	[4]	PAD
8.	175-1199	[2]	ROLLER
9.	180-1714	[2]	CLIP
10.	228-0987	[2]	BEARING
11.	246-9987	[1]	GLASS
12.	247-6820	[1]	FRAME AS-WINDOW
13.	247-6831	[1]	COVER
14.	247-6832	[1]	COVER
15.	247-6833	[1]	HANDLE AS (RH)
16.	247-6834	[1]	HANDLE AS (LH)
17.	247-6836	[1]	RAIL
18.	247-6837	[1]	LEVER AS
19.	247-6838	[1]	SEAL
20.	247-6839	[2]	SEAL
21.	247-6840	[1]	SPACER (LOWER, LH)
22.	247-6841	[1]	SPACER (UPPER, LH)
23.	247-6842	[1]	SPACER (LOWER, RH)
24.	247-6843	[1]	SPACER (UPPER, RH)
25.	247-6844	[1]	LEVER AS
26.	260-7522 M	[4]	SCREW-MACHINE (M4X1.75X20-MM)
27.	280-3079	[1]	RAIL AS
28.	282-6536	[1]	GLASS
29.	282-6537	[1]	SEAL
30.	096-3772 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
31.	167-4076	[2]	LATCH
32.	167-4179	[2]	SPRING AS-GAS (FRONT WINDOW)
33.	167-4180	[4]	BEARING
34.	247-6845 E		SEAL (81-CM)
35.	257-1111 E		SEAL (81-CM)
36.	252-1244 E		SEAL (83-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP68010774

344-5432: WINDOW GP-CAB

WINDOW GP-CAB

344-5432 WINDOW GP-CAB -REAR, SIDE, TOP WINDOWS
S/N K3D1-UP
PART OF 383-4065, 383-4067 CAB GP
Type 1
AN ATTACHMENT

i03698523 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6C-9236	[2]	RETAINER
2.	6C-9237	[2]	RIVET
3.	151-6790	[1]	GLASS (LH)
4.	276-2331	[1]	FILM-INSTRUCTION (EXIT)
5.	345-7836	[1]	GLASS
6.	349-0089	[1]	GLASS (REAR)
7.	234-6489	[1]	GLASS (RH)
8.	133-5514	[1]	HAMMER

#SEBP68010775

344-5432: WINDOW GP-CAB

WINDOW GP-CAB

344-5432 WINDOW GP-CAB -REAR, SIDE, TOP WINDOWS
S/N K3D1-UP
PART OF 383-4065, 383-4067 CAB GP
Type 2
AN ATTACHMENT

i05327038 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6C-9236	[2]	RETAINER
2.	6C-9237	[2]	RIVET
3.	151-6790	[1]	GLASS (LH)
4.	276-2331	[1]	FILM-INSTRUCTION (EXIT)
5.	353-5917 C	[1]	GLASS
6.	349-0089	[1]	GLASS (REAR)
7.	234-6489	[1]	GLASS (RH)
8.	133-5514	[1]	HAMMER
	C		CHANGE FROM PREVIOUS TYPE

#SEBP68010776

395-3432: WINDOW GP-CAB

WINDOW GP-CAB

395-3432 WINDOW GP-CAB -FRONT WINDOW, 70/30-SPLIT
S/N K3D1-UP
PART OF 383-4067 CAB GP
AN ATTACHMENT

i05212273 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	139-7127	[1]	HOLDER
2.	189-2054	[1]	SWITCH AS (WIPER CUT-OUT)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6V-8373	[2]	SCREW-MACHINE (6-32X0.187-IN)
3.	217-6421	[1]	PLATE
4.	247-6847	[1]	RAIL
5.	247-6848	[1]	RAIL
6.	247-6849	[1]	STOP
7.	276-2336	[1]	FILM-INSTRUCTION (STEERING WHEEL TILT CONTROL)
8.	282-6535 Y	[1]	WINDOW GP-CAB (FRONT WINDOW, 70/30-SPLIT)
9.	293-8698	[2]	BUMPER
10.	101-2867	[2]	WASHER-HARD (7.2X25X2-MM THK)
11.	167-4084	[2]	STRIKER
12.	8T-9534 M	[5]	BOLT (M6X1X50-MM)
13.	247-6850	[1]	RING
14.	247-6859	[2]	SPACER-SPECIAL
15.	252-1248	[2]	SPACER-SPECIAL
16.	252-1249	[2]	SPACER-SPECIAL
17.	286-9521	[2]	GROMMET
18.	4I-4270	[1]	HOLDER-GLASS
19.	5C-7423 M	[2]	SCREW (M6X1X16-MM)
20.	8T-1573 M	[12]	SCREW-FLAT HEAD (M5X0.8X25-MM)
21.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
22.	172-1681 E		SEAL (68-CM)
23.	133-3234 E		SEAL (111-CM EACH)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68010777

287-7534: WIPER GP-WINDOW

WIPER GP-WINDOW

287-7534 WIPER GP-WINDOW -FRONT WINDOW, 70/30-SPLIT
S/N K3D1-UP
PART OF 361-3463 WIPER GP-WINDOW
AN ATTACHMENT

i02947698 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	218-2656	[1]	FITTING
2.	233-0806	[1]	KIT-SUPPORT (WINDOW WIPER)
			(INCLUDES BOLT, BUMPERS, NUT, SPACER & SUPPORT)
3.	235-5763	[1]	NOZZLE
4.	248-7990	[1]	BLADE AS-WIPER (900-MM)(UPPER)
5.	292-6567	[1]	BLADE AS-WIPER (280-MM)(LOWER)
6.	302-1835	[2]	SPRING
7.	305-9192	[1]	NOZZLE AS-WASHER

#SEBP68010778

361-3462: WIPER GP-WINDOW

WIPER GP-WINDOW

361-3462 WIPER GP-WINDOW -FRONT WINDOW, 1-PIECE
S/N K3D1-UP
AN ATTACHMENT

i04173489 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-5400	[1]	CONNECTOR
2.	323-3272	[1]	MOTOR GP-WINDOW WIPER (24-VOLT)(FRONT)
	151-9274	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	346-7443	[1]	ARM AS-WIPER (FRONT WINDOW)
4.	357-0588	[1]	LINKAGE AS
	218-2657	[2]	COVER
5.	357-0994	[1]	BRACKET AS
6.	195-3218	[1]	BLADE AS-WIPER (TWIN BLADE)
	6V-6864	[1]	BLADE AS-WIPER (600-MM)(LOWER)
	6V-7419	[1]	BLADE AS-WIPER (700-MM)(UPPER)
	218-2656	[1]	FITTING
7.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP68010779

361-3463: WIPER GP-WINDOW

WIPER GP-WINDOW

361-3463 WIPER GP-WINDOW -FRONT WINDOW, 70/30-SPLIT
S/N K3D1-UP
PART OF 420-9681, 420-9684, 435-5806, 469-1377 DISTRIBUTION AR
AN ATTACHMENT

i04171309 SEBP6801

For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-5400	[1]	CONNECTOR
2.	287-7534 Y	[1]	WIPER GP-WINDOW (FRONT WINDOW, 70/30-SPLIT)
3.	323-3272	[1]	MOTOR GP-WINDOW WIPER (24-VOLT)(FRONT)
	151-9274	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	346-7443	[1]	ARM AS-WIPER (FRONT WINDOW)
5.	357-0588	[1]	LINKAGE AS
	218-2657	[2]	COVER
6.	357-0994	[1]	BRACKET AS
7.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION