428-7598 FRAME GP-LOADER -SINGLE TILT S/N HWA1-UP PART OF 450-8485 CHASSIS AR ALSO AN ATTACHMENT 415F2



FRAME AND BODY
FRAME GP
GRILL GP
GUARD GP
ENCLOSURE GP
HOOD GP
FENDER GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP

BACKHOE LOADER 415F2 BACKHOE LOADER HWA
 415F2 Center Pivot Backhoe Loader HWA00001-UP (MACHINE) POWERED BY C3.4 Engine SEBP6832 415F2 HWA   (2013)

FRAME AND BODY

FRAME GP
FRAME GP-LOADER
428-7598 FRAME GP-LOADER
FRAME GP-SWING
337-9830 FRAME GP-SWING
 

#SEBP68320370
 

428-7598: FRAME GP-LOADER

428-7598 FRAME GP-LOADER -SINGLE TILT
S/N HWA1-UP
PART OF 450-8485 CHASSIS AR
ALSO AN ATTACHMENT
i05892801 SEBP6832
4287598 FRAME GP-LOADER Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 9R-0481 [2] WASHER (71X110X4-MM THK)  
2. 252-2157 [4] FILM-INFORMATION (TIE-DOWN)  
3. 362-2090 [1] CAP AS  
3A. 363-0528 [2] BEARING  
4. 370-5555 [2] CAP  
5. 428-8954 [1] FRAME AS  
5A. 220-1013 [2] BUSHING  
5B. 363-0528 [2] BEARING  
5C. 278-7066 [4] BEARING  
6. 246-7854 M [49] NUT-SPECIAL (M10X1.5-THD)  
7. 370-0495 M [12] NUT-SPECIAL (M8X1.25-THD)  
8. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
9. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
10. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
11. 8T-5878 M [4] BOLT (M24X3X80-MM)  
  M   METRIC PART
 

#SEBP68320371
 

337-9830: FRAME GP-SWING

337-9830 FRAME GP-SWING
S/N HWA1-UP
PART OF 450-8727, 450-8728 BACKHOE AR-EXTENDABLE STICK, 450-8726 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
i04565358 SEBP6832
3379830 FRAME GP-SWING Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 136-1122 [1] BUSHING  
2. 209-6850 [1] PIN AS  
3. 237-5330 [2] PIN  
4. 280-7732 [2] WASHER (76.5X130X8-MM THK)  
5. 341-0597 [1] FRAME AS  
5A. 213-6702 [4] BUSHING  
5B. 237-0944 [2] BUSHING  
5C. 278-5454 [2] BUSHING  
6. 341-9483 [1] PIN  
7. 341-9484 [1] PIN AS  
8. 341-9488 [2] PIN  
9. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
10. 6V-4364 [4] RING-RETAINING  
11. 6V-7687 M [3] LOCKNUT (M12X1.75-THD)  
12. 7X-0542 [2] WASHER-HARD (51X74X3-MM THK)  
13. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
14. 8T-4821 [2] WASHER (13.5X40X3-MM THK)  
15. 8T-7930 M [3] BOLT (M12X1.75X160-MM)  
16. 9R-7882 [1] SPACER (14X25X7-MM THK)  
17. 465-3495 [1] PLATE  
  M   METRIC PART
 

#SEBP68320372
 

368-0291: GRILL GP-RADIATOR

368-0291 GRILL GP-RADIATOR
S/N HWA1-UP
PART OF 397-5422 HOOD & GUARD GP
ALSO AN ATTACHMENT
i05190324 SEBP6832
3680291 GRILL GP-RADIATOR Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 127-2170 CM [12] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
2. 365-2511 [1] CAM-LATCH  
3. 369-3473 [1] PIN  
4. 369-3945 [1] BRACKET AS  
  159-9540 M [3] NUT-WELD (M8X1.25-THD)  
5. 372-4613 [2] PLATE  
6. 382-6675 [2] LATCH-MAGNETIC  
7. 388-5405 [1] BRACKET AS  
8. 388-7212 [8] BUSHING  
9. 389-6955 J [1] LOCK AS  
10. 391-0347 [1] PLATE  
11. 398-8225 C [1] COVER  
12. 416-2590 C [1] GRILL  
13. 416-2615 C [1] GUARD AS  
14. 416-4112 C [1] FRAME AS-GRILL  
15. 130-1916 M [2] STUD-BALL (M8X1.25X20-MM)  
16. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
17. 206-6969 [2] PAWL  
18. 220-0738 E SEAL (63-CM)  
19. 260-3568 J [2] LATCH AS  
20. 3T-0852 M [1] LOCKNUT (M8X1.25-THD)  
21. 8S-7803 [2] RING-RETAINING  
22. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
23. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
24. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 3E-6600 E SEAL (68-CM)  
26. 5P-4116 [12] WASHER-HARD (8.8X20.5X2-MM THK)  
27. 5C-7261 M [2] NUT (M8X1.25-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP68320373
 

353-1389: GUARD GP-CYLINDER

353-1389 GUARD GP-CYLINDER -STABILIZER
S/N HWA1-UP
PART OF 387-6458 KIT-GUARD
AN ATTACHMENT
i04603070 SEBP6832
3531389 GUARD GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 3S-8536 [2] SPACER (0.406X0.656X0.38-IN THK)  
2. 8T-4986 [4] CLAMP-HOSE  
3. 9R-0109 [4] WASHER (41X64X3-MM THK)  
4. 188-3953 [2] PAD  
5. 194-9487 [2] BUMPER AS  
6. 241-0888 [2] PLATE  
7. 318-8228 [2] PLATE AS  
8. 372-3178 [2] GUARD AS  
9. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
10. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
11. 7X-7729 [2] WASHER (11X25X3-MM THK)  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP68320374
 

337-9697: GUARD GP-DRIVE SHAFT

337-9697 GUARD GP-DRIVE SHAFT
S/N HWA1-UP
PART OF 398-2626 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i04609209 SEBP6832
3379697 GUARD GP-DRIVE SHAFT Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 399-7019 [1] GUARD AS  
2. 7X-2552 M [4] BOLT (M16X2X30-MM)  
3. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP68320375
 

397-5422: HOOD & GUARD GP

397-5422 HOOD & GUARD GP
S/N HWA1-UP
PART OF 450-8485 CHASSIS AR
ALSO AN ATTACHMENT
i05892781 SEBP6832
3975422 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 130-1916 M [4] STUD-BALL (M8X1.25X20-MM)  
2. 159-8033 [2] FILM-IDENTIFICATION (12-VOLT)  
3. 164-1368 [2] FASTENER (CLIP)  
4. 250-6858 [1] LATCH AS  
5. 351-4746 [1] FILM-IDENTIFICATION (CAT)  
6. 357-4273 [1] HOOD (RH)  
7. 357-4274 [1] HOOD (LH)  
8. 358-1415 [1] GUARD AS  
  9G-9155 [1] CLIP  
  159-9540 M [4] NUT-WELD (M8X1.25-THD)  
9. 362-8135 [1] BUMPER AS (RH)  
10. 362-8136 [1] BUMPER AS (LH)  
    (EACH BUMPER AS INCLUDES)
  8C-8778 M [2] STUD-WELD (M8X1.25X25-MM)  
11. 363-2867 [2] SPRING AS-GAS (HOOD, REAR)  
12. 366-9220 [1] MAT  
13. 367-0055 [1] PLATE AS  
14. 367-7764 [1] PLATE  
15. 368-0291 Y [1] GRILL GP-RADIATOR  
16. 369-2053 [1] PLATE AS  
17. 372-4614 [1] PLATE  
18. 399-8347 [1] CABLE AS  
19. 417-4242 [1] SPRING  
20. 417-4328 [1] BRACKET AS  
  159-9540 M [2] NUT-WELD (M8X1.25-THD)  
21. 418-4037 [2] SPRING AS-GAS (HOOD, FRONT)  
22. 420-4868 J [1] LOCK AS  
23. 424-2305 [1] GROMMET  
24. 127-2170 M [12] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
25. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
26. 198-3899 M [2] SCREW-BUTTON HEAD (M8X1.25X20-MM)  
27. 342-9913 M [6] BOLT-FLANGE HEAD (M10X1.5X20-MM)  
28. 342-9920 M [3] BOLT-FLANGE HEAD (M8X1.25X20-MM)  
29. 5C-7261 M [3] NUT (M8X1.25-THD)  
30. 5P-4116 [9] WASHER-HARD (8.8X20.5X2-MM THK)  
31. 6V-8949 M [2] NUT (M10X1.5-THD)  
32. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
33. 9G-1307 [1] GROMMET  
34. 292-2896 E CONDUIT (16.9-MM ID)(40-CM)  
35. 220-0738 E SEAL (52-CM EACH)  
35A. 220-0738 E SEAL (11-CM EACH)  
35B. 220-0738 E SEAL (5-CM EACH)  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68320376
 

397-7509: HOOD GP-ENGINE

397-7509 HOOD GP-ENGINE
S/N HWA1-UP
PART OF 450-8681 CAB AR
AN ATTACHMENT
i05907666 SEBP6832
3977509 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 130-1916 M [2] STUD-BALL (M8X1.25X20-MM)  
2. 250-6850 [2] BRACKET AS  
3. 358-7864 [1] BRACKET AS  
4. 361-7891 [2] BRACKET AS  
5. 371-7076 [1] HINGE AS (RH)  
6. 371-7077 [1] HINGE AS (LH)  
7. 372-4592 [1] GRILL  
8. 391-2140 [1] BRACKET  
9. 397-5456 [1] INSERT AS  
10. 397-7512 [1] HOOD AS  
11. 174-9194 M [6] BOLT (M8X1.25X16-MM)  
12. 208-9297 M [2] BOLT-FLANGE HEAD (M10X1.5X50-MM)  
13. 342-9920 M [8] BOLT-FLANGE HEAD (M8X1.25X20-MM)  
14. 5C-7261 M [6] NUT (M8X1.25-THD)  
15. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 8T-4127 M [6] SCREW-MACHINE (M5X0.8X20-MM)  
17. 9X-6383 E SEAL (28-CM)  
17A. 9X-6383 E SEAL (22-CM)  
18. 220-0738 E SEAL (83-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP68320377
 

435-0435: HOOD GP-ENGINE

435-0435 HOOD GP-ENGINE
S/N HWA1-UP
PART OF 450-8678 CANOPY AR
AN ATTACHMENT
i05907661 SEBP6832
4350435 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 130-1916 M [2] STUD-BALL (M8X1.25X20-MM)  
2. 250-6850 [2] BRACKET AS  
3. 358-7864 [1] BRACKET AS  
4. 361-4643 [1] HOOD AS  
5. 361-7891 [2] BRACKET AS  
6. 367-7625 [1] INSERT AS  
7. 371-7076 [1] HINGE AS (RH)  
8. 371-7077 [1] HINGE AS (LH)  
9. 372-4592 [1] GRILL  
10. 391-2140 [1] BRACKET  
11. 174-9194 M [6] BOLT (M8X1.25X16-MM)  
12. 208-9297 M [2] BOLT-FLANGE HEAD (M10X1.5X50-MM)  
13. 342-9920 M [8] BOLT-FLANGE HEAD (M8X1.25X20-MM)  
14. 5C-7261 M [6] NUT (M8X1.25-THD)  
15. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 8T-4127 M [6] SCREW-MACHINE (M5X0.8X20-MM)  
17. 9X-6383 E SEAL (27.5-CM)  
17A. 9X-6383 E SEAL (21.8-CM)  
18. 220-0738 E SEAL (83-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP68320378
 

387-6472: KIT-FENDER

387-6472 KIT-FENDER
S/N HWA1-UP
AN ATTACHMENT
i04801965 SEBP6832
3876472 KIT-FENDER Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 337-6851 Y [1] FENDER GP-FRONT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68320379
 

387-6458: KIT-GUARD

387-6458 KIT-GUARD -STABILIZER
S/N HWA1-UP
AN ATTACHMENT
i04803486 SEBP6832
3876458 KIT-GUARD Parts scheme
  For full view, you need register

Parts for your 415F2 BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 353-1389 Y [1] GUARD GP-CYLINDER (STABILIZER)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 415F2 :

FLOORPLATE GP
391-6359 FLOORPLATE GP
FENDER GP-REAR
389-9280 FENDER GP-REAR
FENDER GP-FRONT
337-6851 FENDER GP-FRONT
COUNTERWEIGHT GP
337-9696 COUNTERWEIGHT GP
COUNTERWEIGHT GP
337-9695 COUNTERWEIGHT GP
COUNTERWEIGHT GP
337-9694 COUNTERWEIGHT GP
COUNTERWEIGHT GP
337-9693 COUNTERWEIGHT GP
BOX GP-STORAGE
389-8127 BOX GP-STORAGE
FRAME GP-SWING
337-9830 FRAME GP-SWING
GRILL GP-RADIATOR
368-0291 GRILL GP-RADIATOR
GUARD GP-CYLINDER
353-1389 GUARD GP-CYLINDER
GUARD GP-DRIVE SHAFT
337-9697 GUARD GP-DRIVE SHAFT
HOOD & GUARD GP
397-5422 HOOD & GUARD GP
HOOD GP-ENGINE
397-7509 HOOD GP-ENGINE
HOOD GP-ENGINE
435-0435 HOOD GP-ENGINE
KIT-FENDER
387-6472 KIT-FENDER