AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

450-5893 ENCLOSURE GP-ENGINE S/N CH51-UP PART OF 396-9632 HOOD & GUARD AR M317D2 WHEELED EXCAVATOR


FRAME AND BODY
ENCLOSURE GP
FENDER GP
FRAME GP
GEAR & BEARING GP
GUARD GP

WHEELED EXCAVATOR M317D2 WHEELED EXCAVATOR CH5
 M317 D2 Wheeled Excavator CH500001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6841 M317D2 CH5   (2013)

FRAME AND BODY

ENCLOSURE GP
ENCLOSURE GP-ENGINE
450-5893 ENCLOSURE GP-ENGINE
ENCLOSURE GP-FUEL TANK
338-8343 ENCLOSURE GP-FUEL TANK
ENCLOSURE GP-RADIATOR
449-3653 ENCLOSURE GP-RADIATOR
396-9632 HOOD & GUARD AR
PANEL GP-ENCLOSURE
305-3607 PANEL GP-ENCLOSURE
PANEL GP-ENCLOSURE
321-8758 PANEL GP-ENCLOSURE
 

#SEBP68410210
 

450-5893: ENCLOSURE GP-ENGINE

450-5893 ENCLOSURE GP-ENGINE
S/N CH51-UP
PART OF 396-9632 HOOD & GUARD AR
i05522372 SEBP6841
4505893 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Y-2425 [4] WASHER (6.5X17.5X1.5-MM THK)  
2. 123-5102 B [2] SHIM (2-MM THK)  
3. 206-9348 [1] LATCH AS  
4. 244-2418 B [1] SHIM (4-MM THK)  
5. 252-9846 [1] BRACKET  
6. 254-9393 [1] SUPPORT AS  
7. 254-9395 [1] PLATE  
8. 254-9397 [1] BRACKET AS  
  159-9540 M [2] NUT-WELD (M8X1.25-THD)  
9. 254-9399 [1] PLATE  
10. 254-9413 [1] ANGLE  
11. 256-6392 [1] PLATE  
12. 265-5341 [1] SHEET  
13. 278-6967 [4] SHIM (4-MM THK)  
14. 278-6968 [1] SHIM (2-MM THK)  
15. 285-3468 [1] SUPPORT AS  
  159-3042 M [15] NUT-WELD (M10X1.5-THD)  
16. 305-3607 Y [1] PANEL GP-ENCLOSURE (ENGINE COMPARTMENT)  
17. 321-8758 Y [1] PANEL GP-ENCLOSURE (PUMP COMPARTMENT)  
18. 321-8769 Y [1] DOOR GP-ACCESS  
19. 338-8182 Y [1] STRIKER GP-LATCH (ENGINE COMPARTMENT)  
20. 372-5012 Y [1] CONTROL GP-HANDLE (HOOD RELEASE)  
21. 449-3653 Y [1] ENCLOSURE GP-RADIATOR  
22. 131-3539 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
23. 5C-7261 M [9] NUT (M8X1.25-THD)  
24. 5P-1076 [3] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-4116 [21] WASHER-HARD (8.8X20.5X2-MM THK)  
26. 7X-7729 [12] WASHER (11X25X3-MM THK)  
27. 8T-4133 M [3] NUT (M10X1.5-THD)  
28. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
29. 8T-4171 M [4] BOLT (M6X1X12-MM)  
30. 8T-4189 M [17] BOLT (M8X1.25X20-MM)  
31. 8T-4192 M [8] BOLT (M12X1.75X25-MM)  
32. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
33. 8T-4223 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4244 M [2] NUT (M12X1.75-THD)  
36. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
37. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
38. 217-3403 E SEAL (14-CM)  
39. 128-8364 E SEAL (28-CM)  
39A. 128-8364 E SEAL (20-CM)  
40. 310-3126 E SEAL (73-CM)  
41. 117-0125 E SEAL (94-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68410211
 

338-8343: ENCLOSURE GP-FUEL TANK

338-8343 ENCLOSURE GP-FUEL TANK
S/N CH51-UP
PART OF 396-9632 HOOD & GUARD AR
i05519610 SEBP6841
3388343 ENCLOSURE GP-FUEL TANK Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-6769 [1] DOOR AS  
  254-9405 [2] HINGE AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
2. 259-6772 [1] PLATE  
3. 263-9294 [1] PLUG  
4. 267-1722 [1] SUPPORT AS  
5. 268-2531 [1] PLATE AS  
6. 268-2534 [1] PLATE  
7. 276-5549 Y [1] SUPPORT GP-HOOD (SIDE, LH)  
8. 299-8919 M [1] BOLT (M8X1.25X12-MM)  
9. 321-8803 [2] PLATE  
10. 338-8342 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [9] NUT-WELD (M8X1.25-THD)  
  091-4537 M [1] BOSS-THREADED (M6X1X12-MM)  
11. 5C-7261 M [7] NUT (M8X1.25-THD)  
12. 5P-1076 [5] WASHER-HARD (13.5X30X4-MM THK)  
13. 5P-4116 [11] WASHER-HARD (8.8X20.5X2-MM THK)  
14. 7X-7729 [16] WASHER (11X25X3-MM THK)  
15. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
16. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
17. 8T-4139 M [5] BOLT (M12X1.75X30-MM)  
18. 8T-4197 M [2] BOLT (M8X1.25X40-MM)  
19. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68410212
 

449-3653: ENCLOSURE GP-RADIATOR

449-3653 ENCLOSURE GP-RADIATOR
S/N CH51-UP
PART OF 450-5893 ENCLOSURE GP-ENGINE
i05522380 SEBP6841
4493653 ENCLOSURE GP-RADIATOR Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-9710 [2] HINGE AS  
2. 196-9711 [2] PIN  
3. 196-9720 [2] SPRING-GAS (HOOD)  
4. 196-9728 [1] BRACKET  
5. 206-9349 [1] ROD  
6. 210-0603 Y [1] INSULATION GP-SOUND SUPPR  
7. 252-9841 [1] HOOD AS  
8. 254-9414 [1] BRACKET  
9. 100-7740 [2] RING-RETAINING  
10. 5C-7261 M [14] NUT (M8X1.25-THD)  
11. 5P-4116 [12] WASHER-HARD (8.8X20.5X2-MM THK)  
12. 7Y-6190 M [4] BOLT (M8X1.25X20-MM)  
13. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
14. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
15. 296-1875 E SEAL (144-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68410213
 

463-0561: FENDER GP

463-0561 FENDER GP
S/N CH51-UP
PART OF 473-2839 DISTRIBUTION AR
AN ATTACHMENT
i06143730 SEBP6841
4630561 FENDER GP Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-2366 [2] PLATE  
2. 461-3466 [1] FENDER AS (REAR, RH)  
3. 461-3467 [1] FENDER AS (REAR, LH)  
4. 461-3468 [1] FENDER AS (FRONT, RH)  
5. 461-3469 [1] FENDER AS (FRONT, LH)  
6. 461-3502 [2] PLATE  
7. 461-3503 [2] PLATE  
8. 461-3504 [2] PLATE  
9. 473-0868 [8] PLATE  
10. 5P-4116 [16] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 7X-7729 [24] WASHER (11X25X3-MM THK)  
12. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
13. 8T-4136 M [16] BOLT (M10X1.5X25-MM)  
14. 8T-4193 M [4] BOLT (M16X2X50-MM)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
16. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
17. 206-2724 E GUARD-HOSE (80-CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP68410214
 

340-6850: FRAME GP-UPPER

340-6850 FRAME GP-UPPER
S/N CH51-UP
PART OF 396-4421 CHASSIS AR
i05519598 SEBP6841
3406850 FRAME GP-UPPER Parts scheme 3406850 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-0994 [1] GROMMET  
2. 129-9111 [3] GROMMET  
3. 133-4419 [1] GROMMET  
4. 197-9728 [1] PIN AS  
5. 209-3062 [3] GROMMET  
6. 210-1939 [1] PLATE  
7. 210-2338 [1] BRACKET AS  
8. 215-7925 [2] PIN AS  
9. 245-6490 [1] BUMPER AS  
10. 340-6851 [1] FRAME AS-BEARING  
10A. 197-8766 [2] BEARING  
11. 093-0083 [1] SHIM (1-MM THK)  
12. 093-0086 [2] SHIM (1-MM THK)  
13. 093-0115 [1] SHIM (2-MM THK)  
14. 093-0118 [2] SHIM (2-MM THK)  
15. 093-0349 [3] WASHER (22X60X6-MM THK)  
16. 128-8389 [1] PLATE  
17. 133-2424 [2] SHIM (0.5-MM THK)  
18. 133-2425 [1] SHIM (0.5-MM THK)  
19. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
21. 7Y-2496 [2] SHIM (1.6-MM THK)  
22. 7Y-2498 [1] SHIM (1.6-MM THK)  
23. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
24. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
25. 8T-4780 M [3] BOLT (M20X2.5X30-MM)  
26. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
27. 8T-3425 D CHANNEL-TRIM (0.15-M EACH)  
27A. 8T-3425 D CHANNEL-TRIM (0.09-M EACH)  
27B. 8T-3425 D CHANNEL-TRIM (0.2-M)  
27C. 8T-3425 D CHANNEL-TRIM (0.13-M)  
27D. 8T-3425 D CHANNEL-TRIM (0.07-M EACH)  
28. 217-3403 E SEAL (9-CM)  
29. 6V-5738 D TRIM-EDGE (0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP68410215
 

190-8206: GEAR & BEARING GP-SWING

190-8206 GEAR & BEARING GP-SWING
S/N CH51-UP
PART OF 396-4421 CHASSIS AR
i05519597 SEBP6841
1908206 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1647 [1] GASKET  
2. 085-9311 [34] SPACER (20.6X38X6-MM THK)  
3. 126-1529 [1] PLATE-SWING BEARING  
4. 7Y-1863 [30] SPACER (20.5X38X34-MM THK)  
5. 377-8966 Y [1] GEAR & BEARING GP-SWING  
6. 303-9443 M [34] BOLT (M20X2.5X110-MM)  
7. 303-9444 M [30] BOLT (M20X2.5X90-MM)  
8. 4M-6921 [4] WASHER-SPRING  
9. 7Y-1648 [1] STRIP  
10. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
11. 8T-4199 M [6] BOLT (M8X1.25X12-MM)  
12. 9T-2905 [6] WASHER-BELLEVILLE  
13. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68410216
 

190-8207: GEAR & BEARING GP-SWING

190-8207 GEAR & BEARING GP-SWING
S/N CH51-UP
PART OF 377-8966 GEAR & BEARING GP-SWING
i05519602 SEBP6841
1908207 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4685 E SEAL (350-CM EACH)  
  E   ORDER BY THE CENTIMETER
 

#SEBP68410217
 

377-3724: GEAR & BEARING GP-SWING

377-3724 GEAR & BEARING GP-SWING
S/N CH51-UP
PART OF 377-8966 GEAR & BEARING GP-SWING
i05519603 SEBP6841
3773724 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO BREAKDOWN OF SERVICEABLE PARTS AVAILABLE AT TIME OF PUBLICATION)
 

#SEBP68410218
 

377-8966: GEAR & BEARING GP-SWING

377-8966 GEAR & BEARING GP-SWING
S/N CH51-UP
PART OF 190-8206 GEAR & BEARING GP-SWING
i05519601 SEBP6841
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  190-8207 Y [1] GEAR & BEARING GP-SWING  
    -OR-
  377-3724 Y [1] GEAR & BEARING GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68410219
 

340-6856: GUARD GP-BOTTOM

340-6856 GUARD GP-BOTTOM
S/N CH51-UP
PART OF 396-4421 CHASSIS AR
i05519599 SEBP6841
3406856 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your M317D2 WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-1119 [18] WASHER (9.8X18.5X1.5-MM THK)  
2. 112-8624 [2] COVER-REAR (LH)  
3. 113-4686 [2] COVER-REAR (RH)  
4. 140-7197 [1] COVER-FRONT (LH)  
5. 144-7122 [1] COVER-MIDDLE (LH)  
6. 216-4194 [1] PLATE AS  
7. 259-8098 [1] COVER-FRONT (RH)  
8. 286-4143 [1] PLATE  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
11. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
12. 8T-6467 [18] FASTENER-HEX HEAD  
13. 148-9561 E SEAL (26.5-CM)  
13A. 148-9561 E SEAL (62.5-CM)  
13B. 148-9561 E SEAL (13-CM)  
13C. 148-9561 E SEAL (48-CM)  
13D. 148-9561 E SEAL (10-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog M317D2 :

DOOR GP-ACCESS
321-8769 DOOR GP-ACCESS
DOOR GP-ACCESS
321-8732 DOOR GP-ACCESS
DOOR GP-ACCESS
273-4835 DOOR GP-ACCESS
DOOR GP-ACCESS
201-5675 DOOR GP-ACCESS
COVER GP-ACCESS
269-9107 COVER GP-ACCESS
COUNTERWEIGHT GP
265-5357 COUNTERWEIGHT GP
COUNTERWEIGHT GP
265-5356 COUNTERWEIGHT GP
UNIVERSAL JOINT GP
355-4815 UNIVERSAL JOINT GP
ENCLOSURE GP-FUEL TANK
338-8343 ENCLOSURE GP-FUEL TANK
ENCLOSURE GP-RADIATOR
449-3653 ENCLOSURE GP-RADIATOR
FENDER GP
463-0561 FENDER GP
FRAME GP-UPPER
340-6850 FRAME GP-UPPER
GEAR & BEARING GP-SWING
190-8206 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
190-8207 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
377-3724 GEAR & BEARING GP-SWING
377-8966 GEAR & BEARING GP-SWING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.