AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

322-1359 WIRING GP-BOX S/N EMM1-UP; JEN1-UP PART OF 384-4072 PANEL GP-FUSE AN ATTACHMENT D6R STD TRACK-TYPE TRACTOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
FILTER GP
BRAKE & DIFFERENTIAL DRIVE GP

TRACK-TYPE TRACTOR D6R STD TRACK-TYPE TRACTOR EMM
 D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine SEBP7202 D6R STD EMM   (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
MOUNTING GP-WIRING
389-6148 MOUNTING GP-WIRING
SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
WIRING GP-BOX
322-1359 WIRING GP-BOX
WIRING GP-ELECTRONIC CONTROL
235-8203 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
330-6019 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
330-6019 WIRING GP-ELECTRONIC CONTROL
 

#SEBP72020200
 

322-1359: WIRING GP-BOX

322-1359 WIRING GP-BOX
S/N EMM1-UP; JEN1-UP
PART OF 384-4072 PANEL GP-FUSE
AN ATTACHMENT
i05573690 SEBP7202
3221359 WIRING GP-BOX Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-8553 [1] BLOCK AS-FUSE  
  151-1398 [3] KIT-TERMINAL (LOCK)(FUSE BLOCK)  
    (EACH KIT INCLUDES LOCK)
  227-0912 [1] BLOCK AS-FUSE  
  1H-3244 [2] LOCKWASHER  
  6V-8185 [2] NUT (1/4-20-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  180-5737 [1] COVER  
2. [1] HARNESS AS-PANEL (FUSE BLOCK)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9G-3695 [37] PLUG-SEAL  
  9W-2032 [3] TERMINAL-BLADE (10-GA TO 12-GA)  
  9W-2033 [12] TERMINAL-BLADE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1767 [23] PIN-CONNECTOR (14-GA TO 16-GA)  
  131-1488 [1] TERMINAL AS-RING (6-GA TO 8-GA)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  214-4208 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  230-8792 [5] TERMINAL  
  E   ORDER BY THE CENTIMETER
 

#SEBP72020201
 

235-8203: WIRING GP-ELECTRONIC CONTROL

235-8203 WIRING GP-ELECTRONIC CONTROL
S/N TXD1-UP
PART OF 387-8581, 387-8582 ENGINE AR-COMPLETE
AN ATTACHMENT
i05555476 SEBP7202
2358203 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
3. 160-8124 [1] PLUG AS (2-PIN)  
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 196-9654 [1] BRACKET AS  
  3W-9139 [1] BOSS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [7] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 215-3249 [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [5] STRAP-CABLE  
  105-1797 [5] MOUNT  
  191-7823 [1] RECEPTACLE AS  
6. 235-8202 [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
  180-9340 [72] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  305-5362 [4] TERMINAL AS (18-GA)  
  1S-9593 [4] STRAP-CABLE  
  264-5732 [1] PLUG AS-CONNECTOR (120-PIN)  
  288-7324 [1] SEAL-CONNECTOR  
  8T-8737 [95] PLUG-SEAL  
  211-6807 [1] COVER-CONNECTOR  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
    (EACH PLUG AS INCLUDES)
  126-5011 [1] SEAL-CONNECTOR  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  119-3662 TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)  
  125-7874 TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  172-6062 [1] PLUG AS-CONNECTOR (18-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
7. 4P-7581 [5] CLIP (LADDER)  
8. 4P-8134 [2] CLIP (LADDER)  
9. 5P-7970 M [5] NUT (M8X1.25-THD)  
10. 6V-4369 [1] CLIP  
11. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
12. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 M [4] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
  M   METRIC PART
 

#SEBP72020202
 

330-6019: WIRING GP-ELECTRONIC CONTROL

330-6019 WIRING GP-ELECTRONIC CONTROL
S/N TXD1-UP
PART OF 387-8582 ENGINE AR-COMPLETE
Type 1
AN ATTACHMENT
i05567976 SEBP7202
3306019 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
2. 196-9654 [1] BRACKET AS  
  3W-9139 [1] BOSS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [7] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 419-0841 Y [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
4. 323-9140 Y [1] HARNESS AS-ENGINE (SPEED SENSOR)  
5. 4P-7581 [5] CLIP (LADDER)  
6. 4P-8134 [2] CLIP (LADDER)  
7. 5P-7970 M [5] NUT (M8X1.25-THD)  
8. 6V-4369 [1] CLIP  
9. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
10. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
11. 6V-6317 M [4] BOLT (M10X1.5X20-MM)  
12. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 8T-5451 M [1] BOLT (M6X1X12-MM)  
17. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
18. 274-3774 [1] CAP-CONNECTOR  
19. 440-0881 M [5] BOLT-SOCKET HEAD (M8X1.25-THD)  
20. 439-4571 [5] CLIP (LOOP)  
21. 6K-0806 [3] STRAP-CABLE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72020203
 

330-6019: WIRING GP-ELECTRONIC CONTROL

330-6019 WIRING GP-ELECTRONIC CONTROL
S/N TXD1-UP
PART OF 387-8582 ENGINE AR-COMPLETE
Type 2
AN ATTACHMENT
i07506136 SEBP7202
3306019 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
2. 6K-0806 [3] STRAP-CABLE  
3. 196-9654 [1] BRACKET AS  
  3W-9139 [1] BOSS  
  170-7256 [1] BOSS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [7] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
4. 274-3774 [1] CAP-CONNECTOR  
5. 323-9140 Y [1] HARNESS AS-ENGINE (SPEED SENSOR)  
6. 439-4571 [5] CLIP (LOOP)(LOOP)  
7. 440-0881 M [5] BOLT-SOCKET HEAD (M8X1.25-THD)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [2] CLIP (LADDER)  
10. 546-2154 CY [1] HARNESS AS-CONTROL  
11. 5P-7970 M [5] NUT (M8X1.25-THD)  
12. 6V-4369 [1] CLIP  
13. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
14. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
15. 6V-6317 M [4] BOLT (M10X1.5X20-MM)  
16. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
17. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
18. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
19. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 8T-5451 M [1] BOLT (M6X1X12-MM)  
21. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72020204
 

317-6576: WIRING GP-ENGINE

317-6576 WIRING GP-ENGINE
S/N EMM1-UP; JEN1-UP
PART OF 389-3215 INSTALLATION AR-ENGINE
i05640615 SEBP7202
3176576 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-3430 [1] STRIP AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
  8E-3431 [1] PLATE  
2. 8T-3518 [2] NUT-FULL (1/2-13-THD)  
3. 121-2844 [1] HARNESS AS-WIRING (CRANK WITHOUT INJECT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [5] PLUG-SEAL  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 124-6998 [1] PLATE  
5. 145-7028 Y [1] SENSOR GP-TEMPERATURE (TRANSMISSION SUMP)  
5A. 145-7028 Y [1] SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)  
6. 147-3150 [1] ANGLE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 183-4274 [1] BRACKET  
8. 204-2281 [2] STRAP-CABLE  
9. 266-2404 [1] BRACKET AS  
10. 302-3908 [1] SPACER (11X20X30-MM THK)  
11. 320-5890 [1] HARNESS AS-ENGINE  
  361-6052 [1] RESISTOR AS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8N-1544 [1] PIN-CONNECTOR (8-GA)  
  8T-8737 [57] PLUG-SEAL  
  110-8769 [1] WIRE AS (16-GA)  
  114-8843 E SLEEVE-PLASTIC (120-CM)  
  114-8845 E SLEEVE-PLASTIC (60-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  9X-3402 [94] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [94] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1767 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [16] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1774 [1] COVER-CONNECTOR  
  127-5486 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  2L-8049 [1] TERMINAL-RING (6-GA, NO. 10 SCREW)  
    -OR-
  2L-8057 [1] TERMINAL-RING (8-GA, NO. 10 SCREW)  
  2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  160-8124 [1] PLUG AS (2-PIN)  
  8T-8737 [2] PLUG-SEAL  
  160-7689 [2] PLUG AS-CONNECTOR (70-PIN)  
    (EACH INCLUDES)
  159-9322 [1] SEAL-O-RING  
12. 435-8365 [1] CABLE AS  
  1S-4915 [2] LINER (CONDUIT)  
  5P-0695 E CONDUIT (169-CM)  
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  030-1705 [1] TERMINAL-CABLE (00-GA, 5/16-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(202-CM)  
  276-1786 [1] COVER-TERMINAL (RED)  
  301-0091 [1] COVER-TERMINAL (RED)  
13. 109-3001 M [1] STUD-TAPERLOCK (M10X1.5X65-MM)  
14. 132-5789 [1] CLIP (LADDER)  
15. 144-8344 [1] SPACER (11X19X20-MM THK)  
16. 1S-0994 [2] CLIP (LOOP)  
17. 1S-1015 [1] CLIP  
18. 4P-7429 [2] CLIP (LADDER)  
19. 4P-7581 [8] CLIP (LADDER)  
20. 4P-7582 [1] CLIP (LADDER)  
21. 4P-8134 [5] CLIP (LADDER)  
22. 5C-7261 M [2] NUT (M8X1.25-THD)  
23. 5P-7464 [1] CLIP (SLOT)  
24. 5P-7465 [1] CLIP (TAB)  
25. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
26. 7F-0560 [2] WASHER (0.516X0.938X0.101-IN THK)  
27. 7J-0204 [2] SEAL-O-RING  
28. 7K-1181 [45] STRAP-CABLE  
29. 7X-0515 [1] WASHER-HARD (17X35X5-MM THK)  
30. 8S-0948 [2] CLIP  
31. 8T-2920 [1] GROMMET (27-MM ID)  
32. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [1] NUT (M10X1.5-THD)  
34. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
36. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
37. 8T-4190 M [1] BOLT (M16X2X25-MM)  
38. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
39. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72020205
 

389-6154: WIRING GP-GRADE CONTROL

389-6154 WIRING GP-GRADE CONTROL
S/N EMM1-UP; JEN1-UP
PART OF 389-6127 GRADE CONTROL AR
AN ATTACHMENT
i05628169 SEBP7202
3896154 WIRING GP-GRADE CONTROL Parts scheme 3896154 WIRING GP-GRADE CONTROL Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3033 [12] SCREW-SOCKET HEAD (4-40X0.5-IN)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 7R-3029 [3] CAP-DUST  
4. 8T-9655 [8] MOUNT-ISOLATION  
5. 132-8487 [3] NUT-RING  
6. 226-9169 [1] MODULE AS-POWER SUPPLY  
7. 236-8826 [3] BOSS (1-1/8-18X0.708-IN)  
8. 240-3469 [1] COVER AS (RH)  
9. 240-3470 [1] COVER AS (LH)  
10. 304-5687 [1] CONTROL GP-UNPROGRAMMED  
11. 319-3753 [1] HARNESS AS-WIRING (LIGHT BAR)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [4] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  9X-3402 [9] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-5008 [3] PLUG AS-CONNECTOR (4-PIN)  
    (EACH INCLUDES)
  264-7031 [1] SEAL-CONNECTOR  
12. 319-3758 [1] HARNESS AS-WIRING (GPS)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [5] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  167-8987 [1] PLUG AS-CONNECTOR (8-PIN)  
  268-3371 [1] CAP AS-CONNECTOR  
13. 320-3065 [1] SENSOR GP-PRESSURE  
14. 320-5902 [1] HARNESS AS-CONTROL  
  8T-8737 [157] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  9X-3402 [51] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [51] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS INCLUDES)
  159-9322 [1] SEAL-O-RING  
15. 334-9544 [2] BRACKET AS  
16. 334-9545 [2] COVER AS  
17. 349-5766 [4] CLAMP  
18. 354-1681 [1] HARNESS AS-SENSOR (INPUT)  
  8T-8737 [6] PLUG-SEAL  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
19. 354-1683 [1] HARNESS AS-SENSOR (OUTPUT)  
  8T-8737 [4] PLUG-SEAL  
  9X-3402 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
20. 372-0294 [1] HARNESS AS-WIRING (CYLINDER, RH)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [3] PLUG-SEAL  
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  228-3323 [1] CLIP-SPRING  
21. 384-1048 [1] HARNESS AS-CHASSIS  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  190-7615 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  8T-8737 [6] PLUG-SEAL  
  114-8843 E SLEEVE-PLASTIC (100-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  9X-3402 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [13] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1767 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [18] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [18] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 B TAPE-ELECTRICAL  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
22. 384-1049 [1] HARNESS AS-WIRING (RADIATOR GUARD)  
  8T-8737 [5] PLUG-SEAL  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM)  
  9X-3402 [18] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [18] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [15] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  134-2540 [2] RECEPTACLE AS-CONNECTOR (3-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2257 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  174-0503 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
23. 384-1050 [1] HARNESS AS-WIRING (CYLINDER, LH)  
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  190-7615 [1] KIT-RECEPTACLE (12-PIN)  
  228-3323 [2] CLIP-SPRING  
24. 130-5300 [2] CLIP  
25. 131-3539 M [3] SCREW-FLAT HEAD (M8X1.25X30-MM)  
26. 1M-4543 [2] GROMMET  
27. 1S-6420 [4] CLIP  
28. 200-6345 [1] SADDLE-MOUNTING (DUAL SWIVEL)  
29. 214-7568 [1] SEAL-O-RING  
30. 297-0693 [1] FILM-IDENTIFICATION (JOYSTICK)(GRADE CONTROL)  
31. 302-3908 [1] SPACER (11X20X30-MM THK)  
32. 3E-4352 [10] WASHER-HARD (8.8X20.5X2.5-MM THK)  
33. 4P-0489 [2] SPACER (11X25X26.8-MM THK)  
34. 4P-7581 [4] CLIP (LADDER)  
35. 5C-9553 M [4] BOLT (M6X1X16-MM)  
36. 5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 7K-1181 [43] STRAP-CABLE  
38. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
39. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
41. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
42. 8T-4185 M [3] BOLT (M10X1.5X50-MM)  
43. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
46. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
47. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP72020206
 

317-6565: WIRING GP-PLATFORM

317-6565 WIRING GP-PLATFORM
S/N EMM1-UP; JEN1-UP
PART OF 393-0289, 393-0290 CAB AR, 387-0575, 393-0288 PLATFORM AR
AN ATTACHMENT
i05573651 SEBP7202
3176565 WIRING GP-PLATFORM Parts scheme 3176565 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(WINCH, BLADE FLOAT DETENT)  
2. 3E-6328 Y [1] ALARM GP (24-VOLT)  
4. 117-2311 [2] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 149-9818 [1] PLATE  
6. 158-6632 Y [1] SWITCH GP-PUSH BUTTON (HORN)  
8. 172-4860 [1] WIRE AS  
9. 202-4327 [1] PULLER-FUSE  
10. 204-8000 [1] MOUNTING-CABLE TIE  
11. 224-9222 [1] BRACKET  
12. 239-3355 [1] GASKET  
13. 239-7392 [1] PLATE AS  
15. 249-5481 [1] SWITCH AS-ROCKER (24-VOLT)(THROTTLE)  
17. 261-7990 [1] GROMMET  
18. 281-3179 [1] BRACKET  
19. 284-3623 [1] SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT)  
20. 317-6574 [1] PLATE AS  
22. 320-5888 [1] HARNESS AS-PLATFORM  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  166-5229 [1] KIT-RECEPTACLE (12-PIN)  
  190-7615 [1] KIT-RECEPTACLE (12-PIN)  
  194-4254 [1] KIT-RECEPTACLE (8-PIN)  
  265-2106 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-0196 [2] TERMINAL AS (16-GA)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  8N-1545 [1] SOCKET-CONNECTOR (8-GA)  
  8T-8736 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  8T-8737 [274] PLUG-SEAL  
  9G-3695 [82] PLUG-SEAL  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  114-8843 E SLEEVE-PLASTIC (260-CM)  
  115-3519 [3] PIN-CONNECTOR (12-GA TO 14-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(46-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(190-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)  
  9X-3402 [157] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [157] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  127-5485 [1] PLUG AS-CONNECTOR (1-PIN)  
  2L-8069 [6] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  134-2540 [3] RECEPTACLE AS-CONNECTOR (3-PIN)  
  9X-3401 [131] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [131] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [6] KIT-CONNECTING PLUG (12-PIN)  
  155-2257 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [3] KIT-CONNECTING PLUG (3-PIN)  
  177-9656 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  160-7689 [2] PLUG AS-CONNECTOR (70-PIN)  
    (EACH INCLUDES)
  159-9322 [1] SEAL-O-RING  
  214-4208 [3] RECEPTACLE AS-CONNECTOR (70-PIN)  
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4010 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
23. 320-5889 [1] HARNESS AS-CONSOLE  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [9] PLUG-SEAL  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  114-8843 E SLEEVE-PLASTIC (100-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  9X-3402 [21] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [21] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  245-7434 [2] KIT-CONNECTING PLUG (10-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  185-1860 [15] SEAL-WIRE  
  202-5397 [5] PLUG  
  204-1297 [15] TERMINAL AS-BLADE (18-GA TO 20-GA)  
    (EACH INCLUDES)
  235-4123 [1] TERMINAL (18-GA TO 20-GA)  
24. 384-4072 Y [1] PANEL GP-FUSE  
25. 322-2095 [1] BRACKET AS  
26. 339-9514 [1] CAP AS  
  5P-5677 D WIRE (18-GA, BLACK)(0.3-M)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(3-CM)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
27. 340-7161 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
28. 107-3786 M [4] BOLT (M4X0.7X12-MM)  
29. 130-5300 [2] CLIP  
30. 132-5789 [3] CLIP (LADDER)  
31. 141-4976 [4] SCREW-WASHER HEAD (4-40X0.5-IN)  
32. 153-8001 M [2] BOLT-SOCKET HEAD (M4X0.7X20-MM)  
33. 199-4317 M [4] BOLT (M10X1.5X115-MM)  
34. 204-2281 [32] STRAP-CABLE  
35. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
37. 5C-8312 M [2] NUT (M4X0.7-THD)  
38. 5F-9757 [2] GROMMET  
39. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 6D-4244 [2] CLIP (LOOP)  
41. 7K-1181 [35] STRAP-CABLE  
42. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
43. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
44. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
45. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
46. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
48. 8T-4138 M [8] BOLT (M6X1X20-MM)  
49. 8T-4171 M [1] BOLT (M6X1X12-MM)  
50. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
53. 8T-7934 [1] WASHER-HARD (11X21X5-MM THK)  
54. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
55. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
56. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
57. 4L-6454 [1] BOLT (3/8-16X1-IN)  
58. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
59. 126-1773 [1] CAP-CONNECTOR  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72020207
 

3W-6550: AXLE GP

3W-6550 AXLE GP
S/N EMM1-UP; JEN1-UP
PART OF 389-3209 POWER TRAIN AR
i05636191 SEBP7202
3W6550 AXLE GP Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6551 [1] SHAFT (FINAL DRIVE, LH)  
2. 3T-5851 [1] SHAFT (FINAL DRIVE, CENTER)  
3. 9G-8637 [1] GEAR-SUN (11-TEETH)  
 

#SEBP72020208
 

333-9308: BASE GP-OIL FILTER

333-9308 BASE GP-OIL FILTER
S/N EMM1-UP; JEN1-UP
INTERNAL BYPASS
PART OF 333-6437 FILTER GP-OIL
i05637510 SEBP7202
3339308 BASE GP-OIL FILTER Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-9549 [1] ADAPTER  
2. 7G-4998 [1] SPOOL-BYPASS  
3. 391-7125 Y [1] SWITCH GP-BYPASS (FILTER)  
4. 334-2679 [1] SPRING  
5. 334-2680 [1] SPRING  
6. 5P-7815 [1] SEAL-O-RING  
7. 6V-5050 [1] SEAL-O-RING  
8. 9S-8008 [1] PLUG (1-1/16-12-THD)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  Y   SEPARATE ILLUSTRATION
 

#SEBP72020209
 

231-5969: BRAKE & DIFFERENTIAL DRIVE GP

231-5969 BRAKE & DIFFERENTIAL DRIVE GP
S/N EMM1-UP; JEN1-UP
LH
PART OF 389-3209 POWER TRAIN AR
i05636595 SEBP7202
2315969 BRAKE & DIFFERENTIAL DRIVE GP Parts scheme 2315969 BRAKE & DIFFERENTIAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6R STD TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-5069 [1] CUP-BEARING (TAPERED ROLLER)  
2. 2K-9295 [1] BEARING AS-TAPERED ROLLER  
3. 3B-4124 [1] CUP-BEARING (TAPERED ROLLER)  
4. 3S-2708 [7] PIN-SPRING  
5. 3T-4568 [3] SHAFT-PLANETARY  
6. 455-5436 [1] GEAR AS-SUN (30/24-TEETH)  
6A. 290-9849 [1] RING-RETAINING  
  442-0013 [1] SPACER  
7. 3T-4824 [4] GEAR-PLANETARY (30-TEETH)  
8. 3T-5021 [1] CARRIER-PLANETARY  
9. 3T-5200 [1] CARRIER-PLANETARY  
10. 3T-6963 [1] SEAL-RING  
11. 3T-9272 B [1] SHIM PACK (INCLUDES 8-SHIMS)  
12. 5M-0578 [3] BEARING AS-ROLLER  
13. 5M-7925 [4] BEARING AS-ROLLER  
14. 6I-8724 [1] RING-LOCK  
15. 6P-1735 [1] LOCKWASHER  
16. 6P-1736 [1] WASHER (55.17X76.2X2.67-MM THK)  
17. 6T-0062 [1] PLATE  
18. 6T-0064 [4] SHAFT-PLANETARY  
19. 6T-0850 [2] WASHER-THRUST (255X287.25X2.75-MM THK)  
20. 8T-0072 [1] CONE-BEARING  
21. 104-5604 [3] WASHER (7.2X25X2-MM THK)  
22. 6Y-0926 [3] GEAR-PLANETARY (23-TEETH)  
23. 6Y-0984 [1] GEAR-RING (75-TEETH)  
24. 6Y-2704 [1] SPRING-DISC  
25. 6Y-9373 [4] DISC-FRICTION  
26. 7G-1596 [1] RING-RETAINING  
27. 7H-4566 [2] CUP-BEARING (TAPERED ROLLER)  
28. 7T-1885 [1] RING  
29. 7T-6994 [3] PLATE-CLUTCH & BRAKE  
30. 7T-8130 [1] RING-RETAINING  
31. 7T-9788 [1] HUB  
32. 214-3573 [1] PISTON  
33. 7T-9837 [1] PLATE  
34. 8E-8307 [6] DISC-THRUST  
35. 8E-8310 [8] DISC-THRUST  
36. 9B-0576 [1] LOCKNUT-BEARING  
37. 9W-1571 [1] SLINGER  
38. 9W-2853 B [1] SHIM PACK (INCLUDES 21-SHIMS)  
41. 9W-6102 [1] GEAR-RING (84-TEETH)  
42. 440-9567 [1] RING-THRUST  
43. 005-4834 [2] BEARING AS-TAPERED ROLLER  
44. 136-1595 [1] HOUSING-ROTATING  
45. 7T-9832 [1] RETAINER  
46. 216-6371 [1] CARRIER  
47. 217-2293 [1] RETAINER  
48. 502-3926 [1] GEAR SET-BEVEL  
    (INCLUDES BEVEL GEAR & BEVEL PINION)
50. 227-2451 [1] HOUSING AS  
50A. 1A-2223 [2] DOWEL  
50B. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
50C. 1A-1460 [12] BOLT (1/2-13X2-IN)  
51. 030-2135 [4] BOLT-LOCKING (5/16-18X0.625-IN)  
52. 0L-1143 [21] BOLT (3/8-16X2.5-IN)  
53. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
54. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
55. 2A-4639 [1] BOLT (3/8-16X1.625-IN)  
56. 1A-1460 [6] BOLT (1/2-13X2-IN)  
57. 3K-0360 [2] SEAL-O-RING  
58. 5K-9107 [3] BOLT-LOCKING (3/8-16X0.75-IN)  
59. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
60. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
63. 6P-5317 [1] RING-SEAL (EXTERNAL)  
64. 7W-6534 [4] PLUG-PIPE  
66. 8M-4438 [1] SEAL-O-RING  
67. 8P-8357 [1] RING-SEAL (INTERNAL)  
69. 9L-9132 [3] WASHER (10.2X25.5X2.5-MM THK)  
70. 9S-8005 [2] PLUG (3/4-16-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
 

Information:

Operation and Maintenance Manual
Fuses and Circuit Breakers - Replace/Reset
D6R Track-Type Tractor
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Specifications
Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C9 Engines for Caterpillar Built Machines
Troubleshooting
Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 and C9 Engines for Caterpillar Built Machines
CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
C7 and C9 Engines for Caterpillar Built Machines
CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
C7 and C9 Engines for Caterpillar Built Machines
CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines
CID 0264 FMI 08 Decel Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C7 and C9 Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C7 and C9 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines
Decelerator Position Sensor Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0544 FMI 02 Engine Cooling Fan Speed Sensor loss of signal
C7 and C9 Engines for Caterpillar Built Machines
Engine Fan Speed Sensor Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C7 and C9 Engines for Caterpillar Built Machines
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Procedure to Inspect the Battery for Certain Cat&reg; Products {1401, 1402, 1408}
Procedure to Inspect the Battery for Certain Cat® Products {1401, 1402, 1408}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
New Control Harness Assembly is Now Used on Certain Cat<SUP>&reg;</SUP> Machine Engines {1408}
New Control Harness Assembly is Now Used on Certain Cat® Machine Engines {1408}

Caterpillar Parts SIS Catalog D6R STD :

VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
SWITCH GP-PUSH BUTTON
158-6632 SWITCH GP-PUSH BUTTON
SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-BYPASS
391-7125 SWITCH GP-BYPASS
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
223-0558 STARTING MOTOR GP-ELECTRIC
WIRING GP-ELECTRONIC CONTROL
235-8203 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
330-6019 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
330-6019 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
317-6576 WIRING GP-ENGINE
WIRING GP-GRADE CONTROL
389-6154 WIRING GP-GRADE CONTROL
WIRING GP-PLATFORM
317-6565 WIRING GP-PLATFORM
AXLE GP
3W-6550 AXLE GP
BASE GP-OIL FILTER
333-9308 BASE GP-OIL FILTER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.