ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP72060490
388-4261: WIRING GP-ELECTRONIC CONTROL
388-4261 WIRING GP-ELECTRONIC CONTROL
S/N KMR1-UP; TMY1-UP; HTZ1-UP
PART OF 394-5371 MODULE AR-CLEAN EMISSIONS
Type 2
AN ATTACHMENT
S/N KMR1-UP; TMY1-UP; HTZ1-UP
PART OF 394-5371 MODULE AR-CLEAN EMISSIONS
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 290-1993 C | [16] | STRAP-CABLE | |
| 2. | 295-6237 | [1] | WIRE AS-IGNITION | |
| 3. | 315-0225 | [1] | CLAMP-WIRE | |
| 4. | 318-9355 | [1] | MOUNTING-CABLE TIE | |
| 6. | 347-9210 | [1] | SPACER (11X26X60-MM THK) | |
| 7. | 352-4756 Y | [1] | HARNESS AS-CEM (NOZZLE HEATER) | |
| 8. | 364-8334 | [1] | PLATE AS | |
| 9. | 368-5011 | [1] | BRACKET | |
| 10. | 370-4374 | [1] | CLIP | |
| 11. | 373-5283 Y | [1] | SENSOR GP-TEMPERATURE (SCR INLET) | |
| 12. | 374-4768 Y | [1] | SENSOR GP-TEMPERATURE (DUAL SENSOR- DPF, FLAME DETECT)(DPF INLET) | |
| 13. | 493-0945 CY | [1] | WIRING GP-CEM | |
| 14. | 393-3721 | [1] | BRACKET | |
| 15. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 16. | 294-3313 | [1] | CLIP (LADDER) | |
| 17. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 341-3624 | [1] | CLIP (LADDER) | |
| 19. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 20. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 21. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 23. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 24. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 25. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 26. | 344-5673 M | [1] | NUT (M6X1-THD) | |
| 27. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 28. | 162-2165 M | [1] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 29. | 3S-2093 C | [8] | STRAP-CABLE | |
| 30. | 372-8827 C | [8] | INSULATION | |
| (EACH INCLUDES) | ||||
| 193-6910 E | INSULATION (3-CM) | |||
| 31. | 334-9645 C | [2] | SLEEVE | |
| (EACH INCLUDES) | ||||
| E | SLEEVE (8-CM) | |||
| 32. | 7K-1181 C | [17] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72060491
453-0979: WIRING GP-ELECTRONIC CONTROL
453-0979 WIRING GP-ELECTRONIC CONTROL
S/N SYE1-8609
PART OF 373-3838, 398-6913 ENGINE AR-COMPLETE
FOR USE WITH MIXER ELBOW UPWARD POSITION
CANNOT BE USED WITH MIXER ELBOW DOWNWARD POSITION
AN ATTACHMENT
S/N SYE1-8609
PART OF 373-3838, 398-6913 ENGINE AR-COMPLETE
FOR USE WITH MIXER ELBOW UPWARD POSITION
CANNOT BE USED WITH MIXER ELBOW DOWNWARD POSITION
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [16] | STRAP-CABLE | |
| 2. | 7K-1181 | [10] | STRAP-CABLE | |
| 3. | 9N-4685 | [1] | BLOCK | |
| 4. | 054-4984 | [2] | SPACER (10X15X8.5-MM THK) | |
| 5. | 206-6875 | [1] | CAP-TUBE | |
| 6. | 224-9222 | [2] | BRACKET | |
| 7. | 307-1674 | [5] | SPACER (9X16X36-MM THK) | |
| 9. | 452-4685 CY | [1] | HARNESS AS-ENGINE | |
| 10. | 131-0353 M | [2] | STUD (M8X1.25X82.75-MM) | |
| 11. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 12. | 145-2264 M | [1] | STUD (M8X1.25X35-MM) | |
| 13. | 178-1780 | [2] | CLIP | |
| 14. | 178-3336 M | [10] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 15. | 225-9199 | [1] | SPACER (13.5X22X14-MM THK) | |
| 16. | 175-7141 M | [2] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 17. | 352-3968 | [1] | CLIP (LADDER) | |
| 18. | 4B-4276 | [1] | WASHER (7X16X1.6-MM THK) | |
| 19. | 4P-7581 C | [2] | CLIP (LADDER) | |
| 20. | 4P-8134 | [1] | CLIP (LADDER) | |
| 21. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 22. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 23. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| 24. | 6V-8836 M | [1] | BOLT (M6X1X14-MM) | |
| 25. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72060492
453-0979: WIRING GP-ELECTRONIC CONTROL
453-0979 WIRING GP-ELECTRONIC CONTROL
S/N SYE1-UP
PART OF 373-3838, 398-6913, 516-4050, 516-4051 ENGINE AR-COMPLETE
FOR USE WITH MIXER ELBOW UPWARD POSITION
CANNOT BE USED WITH MIXER ELBOW DOWNWARD POSITION
AN ATTACHMENT
S/N SYE1-UP
PART OF 373-3838, 398-6913, 516-4050, 516-4051 ENGINE AR-COMPLETE
FOR USE WITH MIXER ELBOW UPWARD POSITION
CANNOT BE USED WITH MIXER ELBOW DOWNWARD POSITION
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [17] | STRAP-CABLE | |
| 2. | 7K-1181 C | [9] | STRAP-CABLE | |
| 3. | 9N-4685 | [1] | BLOCK | |
| 4. | 054-4984 | [2] | SPACER (10X15X8.5-MM THK) | |
| 5. | 206-6875 | [1] | CAP-TUBE | |
| 6. | 224-9222 C | [1] | BRACKET | |
| 7. | 274-3780 C | [1] | CAP-SEAL | |
| 8. | 307-1674 | [5] | SPACER (9X16X36-MM THK) | |
| 9. | 452-4685 Y | [1] | HARNESS AS-ENGINE | |
| 10. | 131-0353 M | [2] | STUD (M8X1.25X82.75-MM) | |
| 11. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 12. | 178-1780 C | [1] | CLIP | |
| 13. | 178-3336 CM | [9] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 14. | 225-9199 | [1] | SPACER (13.5X22X14-MM THK) | |
| 15. | 175-7141 CM | [1] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 16. | 352-3968 | [1] | CLIP (LADDER) | |
| 17. | 4B-4276 | [1] | WASHER (7X16X1.6-MM THK) | |
| 18. | 4P-7581 | [2] | CLIP (LADDER) | |
| 19. | 4P-8134 | [1] | CLIP (LADDER) | |
| 20. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 21. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 22. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 6V-8836 M | [1] | BOLT (M6X1X14-MM) | |
| 24. | 7X-2537 CM | [1] | BOLT (M8X1.25X35-MM) | |
| 25. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72060493
466-9291: WIRING GP-ELECTRONIC CONTROL
466-9291 WIRING GP-ELECTRONIC CONTROL
S/N KMR1-638; TMY1-384; HTZ1-708
PART OF 424-6287 MODULE AR-DIESEL EXHAUST FLUID
AN ATTACHMENT
S/N KMR1-638; TMY1-384; HTZ1-708
PART OF 424-6287 MODULE AR-DIESEL EXHAUST FLUID
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP72060494
383-8827: WIRING GP-ENGINE
383-8827 WIRING GP-ENGINE
S/N KMR1-471; TMY1-316; HTZ1-456
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
S/N KMR1-471; TMY1-316; HTZ1-456
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 234-5013 Y | [2] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 2. | 290-5792 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT) | |
| 3. | 294-5076 | [1] | PLATE AS | |
| 4. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (AIR FILTER) | |
| 5. | 338-5316 | [3] | BRACKET | |
| 6. | 338-5317 | [1] | BRACKET | |
| 7. | 359-9171 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 8. | 359-9172 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET) | |
| 9. | 374-4688 | [1] | BRACKET AS | |
| 10. | 375-6126 | [1] | SENSOR GP-PRESSURE (HYDRAULIC PUMP) | |
| 11. | 383-8828 | [1] | HARNESS AS-WIRING (ENGINE) | |
| 8T-8737 | [77] | PLUG-SEAL | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [27] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 | TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM) | |||
| 9X-3402 | [70] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [70] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9X-3401 | [67] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [67] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 237-0336 | [1] | COVER (CONNECTOR) | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 281-3132 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 324-6267 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 370-1739 E | TUBE (48-CM) | |||
| 374-7463 | [1] | CAP-SEAL | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 12. | 383-8829 | [1] | HARNESS AS-WIRING (HOOD) | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 281-3133 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 13. | 383-8835 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 5P-0695 E | CONDUIT (218-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(240-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM) | |||
| 274-9183 | [1] | TERMINAL-RING (00-GA, 1/2-IN SCREW) | ||
| 277-6964 | [1] | TERMINAL-RING | ||
| 299-6082 | [1] | COVER-TERMINAL (RED) | ||
| 301-0091 | [1] | COVER-TERMINAL (RED) | ||
| 14. | 388-4900 | [1] | BRACKET AS | |
| 15. | 389-9528 | [1] | PLATE AS | |
| 16. | 390-1709 | [1] | BRACKET AS | |
| 17. | 433-2254 | [1] | BRACKET | |
| 18. | 130-5300 | [3] | CLIP | |
| 19. | 132-5789 | [4] | CLIP (LADDER) | |
| 20. | 148-8306 | [1] | ADAPTER AS | |
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 21. | 1F-7854 | [1] | SPACER (11.01X19.05X49.21-MM THK) | |
| 22. | 1S-0994 | [3] | CLIP (LOOP) | |
| 23. | 203-2789 | [1] | BRACKET AS | |
| 24. | 204-2281 | [2] | STRAP-CABLE | |
| 25. | 204-8000 | [6] | MOUNTING-CABLE TIE | |
| 26. | 303-9449 M | [1] | STUD (M10X1.5-THD) | |
| 27. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 28. | 353-7956 | [2] | GROMMET | |
| 29. | 381-2621 | [1] | MOUNTING-CABLE TIE | |
| 30. | 3J-1907 | [1] | SEAL-O-RING | |
| 31. | 4I-8933 | [1] | PIPE | |
| 32. | 4P-7581 | [5] | CLIP (LADDER) | |
| 33. | 4P-8134 | [6] | CLIP (LADDER) | |
| 34. | 5G-3676 | [2] | GROMMET | |
| 35. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 36. | 5P-4295 | [4] | CLIP | |
| 37. | 5P-7464 | [2] | CLIP (SLOT) | |
| 38. | 5P-7465 | [2] | CLIP (TAB) | |
| 39. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 40. | 6V-7359 | [2] | GROMMET (25-MM ID, 37-MM OD) | |
| 41. | 7F-0560 | [1] | WASHER (0.516X0.938X0.101-IN THK) | |
| 42. | 7K-1181 | [51] | STRAP-CABLE | |
| 43. | 8L-2786 | [1] | SEAL-O-RING | |
| 44. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| 45. | 8T-1889 | [2] | CLIP (SLOT) | |
| 46. | 8T-1890 | [2] | CLIP (TAB) | |
| 47. | 8T-3518 | [1] | NUT-FULL (1/2-13-THD) | |
| 48. | 8T-4121 | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 50. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 51. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 52. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 53. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 54. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 55. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 56. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 57. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 58. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 59. | 9R-1004 | [2] | CLIP (TAB) | |
| 60. | 9R-1005 | [2] | CLIP (SLOT) | |
| 61. | 9W-1991 | [1] | SPACER (10.7X17.1X40-MM THK) | |
| 62. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72060495
383-8827: WIRING GP-ENGINE
383-8827 WIRING GP-ENGINE
S/N KMR472-524; TMY317-334; HTZ457-564
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
S/N KMR472-524; TMY317-334; HTZ457-564
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 234-5013 Y | [2] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 2. | 290-5792 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT) | |
| 3. | 294-5076 | [1] | PLATE AS | |
| 4. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (AIR FILTER) | |
| 5. | 338-5316 | [3] | BRACKET | |
| 7. | 441-5127 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 8. | 441-5128 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT) | |
| 9. | 374-4688 | [1] | BRACKET AS | |
| 10. | 375-6126 | [1] | SENSOR GP-PRESSURE (HYDRAULIC PUMP) | |
| 11. | 383-8828 Y | [1] | HARNESS AS-WIRING (ENGINE) | |
| 12. | 383-8829 Y | [1] | HARNESS AS-WIRING (HOOD) | |
| 13. | 383-8835 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 5P-0695 E | CONDUIT (218-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(240-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM) | |||
| 274-9183 | [1] | TERMINAL-RING (00-GA, 1/2-IN SCREW) | ||
| 277-6964 | [1] | TERMINAL-RING | ||
| 299-6082 | [1] | COVER-TERMINAL (RED) | ||
| 301-0091 | [1] | COVER-TERMINAL (RED) | ||
| 14. | 388-4900 | [1] | BRACKET AS | |
| 15. | 389-9528 | [1] | PLATE AS | |
| 16. | 390-1709 | [1] | BRACKET AS | |
| 17. | 433-2254 | [1] | BRACKET | |
| 18. | 130-5300 | [3] | CLIP | |
| 19. | 132-5789 C | [6] | CLIP (LADDER) | |
| 20. | 148-8306 | [1] | ADAPTER AS | |
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 21. | 1F-7854 C | [2] | SPACER (11.01X19.05X49.21-MM THK) | |
| 22. | 1S-0994 | [3] | CLIP (LOOP) | |
| 23. | 203-2789 | [1] | BRACKET AS | |
| 24. | 204-2281 C | [3] | STRAP-CABLE | |
| 25. | 204-8000 | [6] | MOUNTING-CABLE TIE | |
| 26. | 303-9449 M | [1] | STUD (M10X1.5-THD) | |
| 27. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 28. | 353-7956 | [2] | GROMMET | |
| 29. | 381-2621 C | [2] | MOUNTING-CABLE TIE | |
| 30. | 3J-1907 | [1] | SEAL-O-RING | |
| 32. | 4P-7581 | [5] | CLIP (LADDER) | |
| 33. | 4P-8134 C | [5] | CLIP (LADDER) | |
| 34. | 5G-3676 | [2] | GROMMET | |
| 35. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 36. | 343-2387 C | [3] | CLIP (LOOP) | |
| 37. | 5P-7464 | [2] | CLIP (SLOT) | |
| 38. | 5P-7465 | [2] | CLIP (TAB) | |
| 39. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 40. | 6V-7359 | [2] | GROMMET (25-MM ID, 37-MM OD) | |
| 41. | 7F-0560 | [1] | WASHER (0.516X0.938X0.101-IN THK) | |
| 42. | 7K-1181 C | [53] | STRAP-CABLE | |
| 43. | 8L-2786 | [1] | SEAL-O-RING | |
| 44. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| 45. | 8T-1895 C | [2] | CLIP (SLOT) | |
| 46. | 8T-1896 C | [2] | CLIP (TAB) | |
| 47. | 8T-4244 CM | [1] | NUT (M12X1.75-THD) | |
| 48. | 8T-4121 C | [22] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 50. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 51. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 52. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 53. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 54. | 8T-4189 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 55. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 56. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 57. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 58. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 59. | 9R-1004 | [2] | CLIP (TAB) | |
| 60. | 9R-1005 | [2] | CLIP (SLOT) | |
| 61. | 9W-1991 | [1] | SPACER (10.7X17.1X40-MM THK) | |
| 62. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 63. | 8T-7547 CM | [1] | BOLT (M8X1.25X30-MM) | |
| 64. | 460-0185 C | [1] | BRACKET | |
| 65. | 352-3966 C | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72060496
383-8827: WIRING GP-ENGINE
383-8827 WIRING GP-ENGINE
S/N KMR525-UP; TMY335-UP; HTZ565-UP
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
S/N KMR525-UP; TMY335-UP; HTZ565-UP
PART OF 375-3370 INSTALLATION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 234-5013 Y | [2] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 2. | 290-5792 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT) | |
| 3. | 294-5076 | [1] | PLATE AS | |
| 4. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (AIR FILTER) | |
| 5. | 338-5316 | [3] | BRACKET | |
| 7. | 359-9171 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 8. | 359-9172 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET) | |
| 9. | 374-4688 | [1] | BRACKET AS | |
| 10. | 375-6126 | [1] | SENSOR GP-PRESSURE (HYDRAULIC PUMP) | |
| 11. | 383-8828 Y | [1] | HARNESS AS-WIRING (ENGINE) | |
| 12. | 480-0104 CY | [1] | HARNESS AS-WIRING (HOOD) | |
| 13. | 383-8835 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 5P-0695 E | CONDUIT (218-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(240-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM) | |||
| 274-9183 | [1] | TERMINAL-RING (00-GA, 1/2-IN SCREW) | ||
| 277-6964 | [1] | TERMINAL-RING | ||
| 299-6082 | [1] | COVER-TERMINAL (RED) | ||
| 301-0091 | [1] | COVER-TERMINAL (RED) | ||
| 14. | 388-4900 | [1] | BRACKET AS | |
| 15. | 389-9528 | [1] | PLATE AS | |
| 16. | 495-1121 | [1] | BRACKET AS | |
| 17. | 433-2254 | [1] | BRACKET | |
| 18. | 130-5300 | [3] | CLIP | |
| 19. | 132-5789 | [6] | CLIP (LADDER) | |
| 20. | 148-8306 | [1] | ADAPTER AS | |
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 21. | 1F-7854 | [1] | SPACER (11.01X19.05X49.21-MM THK) | |
| 22. | 1S-0994 | [3] | CLIP (LOOP) | |
| 23. | 203-2789 | [1] | BRACKET AS | |
| 24. | 204-2281 | [3] | STRAP-CABLE | |
| 25. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 26. | 303-9449 M | [1] | STUD (M10X1.5-THD) | |
| 27. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 28. | 353-7956 | [2] | GROMMET | |
| 29. | 381-2621 | [2] | MOUNTING-CABLE TIE | |
| 30. | 3J-1907 | [1] | SEAL-O-RING | |
| 32. | 4P-7581 | [5] | CLIP (LADDER) | |
| 33. | 4P-8134 | [5] | CLIP (LADDER) | |
| 34. | 5G-3676 | [2] | GROMMET | |
| 35. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 36. | 343-2387 | [3] | CLIP (LOOP) | |
| 37. | 5P-7464 | [2] | CLIP (SLOT) | |
| 38. | 5P-7465 | [2] | CLIP (TAB) | |
| 39. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 40. | 6V-7359 | [2] | GROMMET (25-MM ID, 37-MM OD) | |
| 41. | 7F-0560 | [1] | WASHER (0.516X0.938X0.101-IN THK) | |
| 42. | 7K-1181 | [53] | STRAP-CABLE | |
| 43. | 8L-2786 | [1] | SEAL-O-RING | |
| 44. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| 45. | 8T-1895 | [2] | CLIP (SLOT) | |
| 46. | 8T-1896 | [2] | CLIP (TAB) | |
| 47. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 48. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 50. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 51. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 52. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 53. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 54. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 55. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 56. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 57. | 8T-4195 M | [8] | BOLT (M10X1.5X30-MM) | |
| 58. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 59. | 9R-1004 | [2] | CLIP (TAB) | |
| 60. | 9R-1005 | [2] | CLIP (SLOT) | |
| 61. | 9W-1991 | [1] | SPACER (10.7X17.1X40-MM THK) | |
| 62. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 63. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 64. | 460-0185 | [1] | BRACKET | |
| 65. | 352-3966 | [1] | CLIP (LADDER) | |
| 66. | 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | |
| 67. | 352-3968 | [1] | CLIP (LADDER) | |
| 68. | 353-7957 | [1] | GROMMET | |
| 69. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP72060497
392-0919: WIRING GP-FAN
392-0919 WIRING GP-FAN
S/N KMR1-UP; TMY1-UP; HTZ1-UP
PART OF 382-4201, 382-4202, 382-4203 HYDRAULIC AR
AN ATTACHMENT
S/N KMR1-UP; TMY1-UP; HTZ1-UP
PART OF 382-4201, 382-4202, 382-4203 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 392-0920 | [1] | HARNESS AS-WIRING (FAN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 2. | 393-0793 | [1] | BRACKET | |
| 3. | 4P-7581 | [1] | CLIP (LADDER) | |
| 4. | 310-1898 | [1] | CLIP (LADDER) | |
| 5. | 353-7956 | [2] | GROMMET | |
| 6. | 381-2621 | [1] | MOUNTING-CABLE TIE | |
| 7. | 4P-8134 | [1] | CLIP (LADDER) | |
| 8. | 7K-1181 | [7] | STRAP-CABLE | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP72060498
392-5517: WIRING GP-GRADE CONTROL
392-5517 WIRING GP-GRADE CONTROL
S/N KMR1-UP; TMY1-UP; HTZ1-UP
PART OF 381-2026, 462-7664 GRADE CONTROL AR
AN ATTACHMENT
S/N KMR1-UP; TMY1-UP; HTZ1-UP
PART OF 381-2026, 462-7664 GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP72060499
434-9075: WIRING GP-GRADE CONTROL
434-9075 WIRING GP-GRADE CONTROL -STABLE BLADE
S/N KMR1-UP; TMY1-UP
PART OF 387-8315, 433-0326, 433-0336, 433-0337 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N KMR1-UP; TMY1-UP
PART OF 387-8315, 433-0326, 433-0336, 433-0337 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 390-2881 Y | [1] | SENSOR & MTG GP-GRADE (STABLE BLADE) | |
| 2. | 434-3116 | [1] | PLATE AS | |
| 3. | 457-1559 | [1] | HARNESS AS-WIRING (BLADE ANGLE) | |
| 457-1557 I | [1] | HOSE AS | ||
| 457-1558 | [1] | HARNESS AS-WIRING (BLADE ANGLE) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 190-2181 | [1] | GROMMET-RUBBER | ||
| 4. | 5P-7466 | [1] | CLIP (SLOT) | |
| 5. | 5P-7467 | [1] | CLIP (TAB) | |
| 6. | 5P-8112 | [1] | GROMMET | |
| 7. | 8T-4183 M | [3] | BOLT (M12X1.75X40-MM) | |
| 8. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog D6T LGP :
Truck sale:
179,500
Caterpillar D6T LGP WH, Crawler dozers, Construction
- Crawler dozers
MACALLISTER MACHINERY CO., INC
- Crawler dozers
MACALLISTER MACHINERY CO., INC
