AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

174-4909 VALVE GP-SOLENOID S/N MG51-UP; GB61-UP 24-VOLT PART OF 485-5146 VALVE GP-BRAKE CONTROL, 389-1531 VALVE GP-CONTROL AN ATTACHMENT D6N


HYDRAULIC SYSTEM
VALVE GP-SOLENOID
IMPLEMENTS
BULLDOZER GP
C-FRAME GP
TRUNNION GP

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GB6
 D6N TRACK-TYPE TRACTOR XL, LGP GB600001-UP (MACHINE) POWERED BY C7.1 Engine SEBP7208 D6N GB6   (2015)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID
VALVE GP-SOLENOID
174-4909 VALVE GP-SOLENOID
 

#SEBP72080790
 

174-4909: VALVE GP-SOLENOID

174-4909 VALVE GP-SOLENOID
S/N MG51-UP; GB61-UP
24-VOLT
PART OF 485-5146 VALVE GP-BRAKE CONTROL, 389-1531 VALVE GP-CONTROL
AN ATTACHMENT
i01496970 SEBP7208
1744909 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-9622 [1] COIL AS-SOLENOID (24-VOLT)  
2. 164-2108 [1] WASHER (13.03X25.4X2.38-MM THK)  
3. 218-2373 [1] NUT (1/2-28-THD)  
   
  6V-4589 F [1] SEAL-O-RING  
  8L-2746 F [1] SEAL-O-RING  
  F   NOT SHOWN
 

#SEBP72080791
 

457-6563: BULLDOZER AR-PWR ANGLE & TILT

457-6563 BULLDOZER AR-PWR ANGLE & TILT
S/N MG51-UP; GB61-UP
PART OF 509-3803, 524-2949, 525-0896 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@445-2335@@@@@, @@@@@448-0192@@@@@, @@@@@448-0194@@@@@, @@@@@448-0196@@@@@, @@@@@448-0200@@@@@, @@@@@473-5044@@@@@, CONTROL AR-SEMI-UNIVERSAL
AN ATTACHMENT
i06574530 SEBP7208
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  457-6579 Y [1] C-FRAME AR  
  384-7366 Y [1] COVER GP-TRUNNION  
  364-8500 Y [1] ELECTRONICS GP-MONITOR  
  399-2821 Y [1] ENCLOSURE GP-ENGINE  
  482-0385 Y [1] GUARD GP-LINES  
  457-7660 Y [1] LINES GP-ANGLE & TILT  
  420-4311 Y [1] LINES GP-GREASE  
  482-0384 Y [1] LINES GP-LIFT CYLINDER  
  348-6250 Y [1] LINK GP-PITCH  
  424-4768 Y [1] WIRING GP-CHASSIS  
  457-4840 Y [1] WIRING GP-GRADE CONTROL (GPS)  
  457-7585 Y [1] WIRING GP-RECEIVER (SATELLITE RECEIVER)  
  363-4243 J [1] CONFIGURATION-PREMIUM  
  J   SEE DEALER FOR PRICING, INSTALLATION, AND ACTIVATION OF PREMIUM SOFTWARE
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080792
 

364-6200: BULLDOZER AR-SEMI-UNIVERSAL

364-6200 BULLDOZER AR-SEMI-UNIVERSAL
S/N AB81-UP
AN ATTACHMENT
i06232535 SEBP7208
3646200 BULLDOZER AR-SEMI-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4594 Y [1] BLADE & EDGE GP-SEMI-UNIVERSAL  
2. 319-7125 Y [1] TRUNNION GP-BULLDOZER  
3. 320-5056 Y [1] PUSH ARM GP  
4. 433-4135 Y [1] LINES GP-TILT & TIP CYLINDER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080793
 

457-6579: C-FRAME AR

457-6579 C-FRAME AR
S/N MG51-UP; GB61-UP
PART OF 457-6563 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i06574595 SEBP7208
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  387-2327 Y [1] C-FRAME GP-POWER ANGLING  
  379-3507 Y [1] CYLINDER GP-ANGLING  
  457-4027 Y [1] CYLINDER GP-ANGLING  
  379-3508 Y [1] CYLINDER GP-BULLDOZER LIFT  
  457-4028 Y [1] CYLINDER GP-BULLDOZER LIFT  
  457-4025 Y [1] CYLINDER GP-BULLDOZER TILT  
  134-6775 Y [1] PIN GP-CYLINDER (BULLDOZER)  
   
  107-8126 [2] BEARING  
  109-0959 [4] RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080794
 

383-3381: C-FRAME GP-POWER ANGLING

383-3381 C-FRAME GP-POWER ANGLING
S/N MG51-UP; GB61-UP
PART OF 424-0660, 478-7977 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06226845 SEBP7208
3833381 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-0959 [4] RING  
2. 134-6775 Y [1] PIN GP-CYLINDER  
3. 379-3506 Y [1] CYLINDER GP-BULLDOZER TILT  
4. 379-3507 Y [2] CYLINDER GP-ANGLING  
5. 379-3508 Y [2] CYLINDER GP-BULLDOZER LIFT  
6. 387-2327 Y [1] C-FRAME GP-POWER ANGLING  
7. 107-8126 [2] BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080795
 

383-3391: C-FRAME GP-POWER ANGLING

383-3391 C-FRAME GP-POWER ANGLING
S/N GB61-UP
PART OF 424-0659, 478-7976 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06222485 SEBP7208
3833391 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-0959 [4] RING  
2. 134-6775 Y [1] PIN GP-CYLINDER  
3. 379-3506 Y [1] CYLINDER GP-BULLDOZER TILT  
4. 379-3507 Y [2] CYLINDER GP-ANGLING  
5. 379-3508 Y [2] CYLINDER GP-BULLDOZER LIFT  
6. 387-2332 Y [1] C-FRAME GP-POWER ANGLING  
7. 107-8126 [2] BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080796
 

387-2327: C-FRAME GP-POWER ANGLING

387-2327 C-FRAME GP-POWER ANGLING
S/N MG51-UP; GB61-UP
PART OF 457-6579 C-FRAME AR, 383-3381 C-FRAME GP-POWER ANGLING
AN ATTACHMENT
i06226979 SEBP7208
3872327 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-0231 [1] RETAINER  
2. 8G-5747 [2] SPACER (45X50X15-MM THK)  
3. 104-4817 [1] PIN  
4. 124-5234 [4] RETAINER  
5. 124-5741 [2] PIN  
6. 223-3279 [1] RETAINER  
7. 226-7192 [1] SPACER (50.8X57.15X25-MM THK)  
8. 229-1516 [2] SPACER (64X72X18-MM THK)  
9. 245-1168 [1] PIN  
10. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
11. 313-9790 [1] SPACER (50.8X57.15X35-MM THK)  
12. 358-2191 [2] PIN  
13. 494-9315 [1] FRAME AS  
13A. 342-8909 [1] TRUNNION  
14. 104-4746 [2] DOWEL  
15. 108-5794 [4] PLUG-PIPE  
16. 109-0958 [2] PIN  
17. 4Y-4905 [6] WASHER (79X175X2-MM THK)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
20. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 7X-2562 M [1] BOLT (M20X2.5X45-MM)  
22. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

#SEBP72080797
 

387-2332: C-FRAME GP-POWER ANGLING

387-2332 C-FRAME GP-POWER ANGLING
S/N GB61-UP
PART OF 383-3391, 457-7679 C-FRAME GP-POWER ANGLING
AN ATTACHMENT
i06222727 SEBP7208
3872332 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-0231 [1] RETAINER  
2. 8G-5747 [2] SPACER (45X50X15-MM THK)  
3. 104-4817 [1] PIN  
4. 124-5234 [4] RETAINER  
5. 124-5741 [2] PIN  
6. 223-3279 [1] RETAINER  
7. 226-7192 [1] SPACER (50.8X57.15X25-MM THK)  
8. 229-1516 [2] SPACER (64X72X18-MM THK)  
9. 473-4512 [1] PIN  
10. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
11. 313-9790 [1] SPACER (50.8X57.15X35-MM THK)  
12. 358-2191 [2] PIN  
13. 494-9143 [1] FRAME AS  
13A. 342-8909 [1] TRUNNION  
14. 104-4746 [2] DOWEL  
15. 108-5794 [4] PLUG-PIPE  
16. 109-0958 [2] PIN  
17. 4Y-4905 [6] WASHER (79X175X2-MM THK)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
20. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 7X-2562 M [1] BOLT (M20X2.5X45-MM)  
22. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

#SEBP72080798
 

457-7679: C-FRAME GP-POWER ANGLING

457-7679 C-FRAME GP-POWER ANGLING
S/N GB61-UP
PART OF 457-7676 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06750777 SEBP7208
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  387-2332 Y [1] C-FRAME GP-POWER ANGLING  
  379-3507 Y [1] CYLINDER GP-ANGLING  
  457-4027 Y [1] CYLINDER GP-ANGLING  
  379-3508 Y [1] CYLINDER GP-BULLDOZER LIFT  
  457-4028 Y [1] CYLINDER GP-BULLDOZER LIFT  
  457-4025 Y [1] CYLINDER GP-BULLDOZER TILT  
  134-6775 Y [1] PIN GP-CYLINDER  
  107-8126 [2] BEARING  
  109-0959 [4] RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72080799
 

384-7366: COVER GP-TRUNNION

384-7366 COVER GP-TRUNNION
S/N MG51-UP; GB61-UP
PART OF 457-6563 BULLDOZER AR-PWR ANGLE & TILT, 424-0659, 424-0660, 457-7676, 478-7976, 478-7977 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i04764705 SEBP7208
3847366 COVER GP-TRUNNION Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-0802 [2] COVER  
2. 5P-1979 [2] SEAL-O-RING  
3. 8T-4193 M [20] BOLT (M16X2X50-MM)  
4. 9X-8257 [20] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6N :

VALVE GP-PUMP CONTROL
285-5240 VALVE GP-PUMP CONTROL
VALVE GP-PILOT
373-7007 VALVE GP-PILOT
VALVE GP-MANIFOLD & RELIEF
394-6364 VALVE GP-MANIFOLD & RELIEF
VALVE GP-FLUSHING
111-7346 VALVE GP-FLUSHING
VALVE GP-CONTROL
424-4856 VALVE GP-CONTROL
VALVE GP-CONTROL
424-4854 VALVE GP-CONTROL
VALVE GP-CONTROL
424-4853 VALVE GP-CONTROL
VALVE GP-CONTROL
394-6367 VALVE GP-CONTROL
457-6563 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-SEMI-UNIVERSAL
364-6200 BULLDOZER AR-SEMI-UNIVERSAL
457-6579 C-FRAME AR
C-FRAME GP-POWER ANGLING
383-3381 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
383-3391 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
387-2327 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
387-2332 C-FRAME GP-POWER ANGLING
457-7679 C-FRAME GP-POWER ANGLING

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.