AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

387-8449 BULLDOZER AR-PWR ANGLE & TILT S/N EG61-UP Type 3 AN ATTACHMENT D6T LGPPAT TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
C-FRAME GP
LINES GP-GREASE

TRACK-TYPE TRACTOR D6T LGPPAT TRACK-TYPE TRACTOR CR3
 D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering CR300001-UP (MACHINE) POWERED BY C9.3 Engine SEBP7227 D6T LGPPAT CR3   (2014)

IMPLEMENTS

BULLDOZER GP
BULLDOZER AR-PWR ANGLE & TILT
387-8449 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
387-8449 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
387-8449 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
387-8475 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
387-8475 BULLDOZER AR-PWR ANGLE & TILT
442-8471 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
457-0859 BULLDOZER AR-PWR ANGLE & TILT
457-0860 BULLDOZER AR-PWR ANGLE & TILT
LINK GP-PITCH
381-1880 LINK GP-PITCH
 

#SEBP72270830
 

387-8449: BULLDOZER AR-PWR ANGLE & TILT

387-8449 BULLDOZER AR-PWR ANGLE & TILT
S/N EG61-UP
Type 3
AN ATTACHMENT
i06922205 SEBP7227
3878449 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 381-1880 Y [1] LINK GP-PITCH  
3. 382-4274 Y [1] CYLINDER & LINES GP-LIFT (RH)  
4. 382-4275 Y [1] CYLINDER & LINES GP-LIFT (LH)  
5. 481-4895 CY [1] BLADE & EDGE GP-ANGLING  
6. 387-8457 Y [1] C-FRAME GP  
7. 470-7319 Y [1] LINES GP-ANGLE & TILT  
8. 455-6756 Y [2] CYLINDER GP-ANGLING  
9. 434-9075 Y [1] WIRING GP-GRADE CONTROL  
   
  7J-2608 F [1] PLATE & FILM GP  
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270831
 

387-8475: BULLDOZER AR-PWR ANGLE & TILT

387-8475 BULLDOZER AR-PWR ANGLE & TILT
S/N EG81-UP
Type 1
AN ATTACHMENT
i05931797 SEBP7227
3878475 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 381-1880 Y [1] LINK GP-PITCH  
3. 382-4274 Y [1] CYLINDER & LINES GP-LIFT (RH)  
4. 382-4275 Y [1] CYLINDER & LINES GP-LIFT (LH)  
5. 387-8459 Y [1] LINES GP-ANGLE & TILT  
6. 387-8477 Y [1] BLADE GP-ANGLING  
7. 434-4591 Y [2] CYLINDER GP-ANGLING  
8. 434-9075 Y [1] WIRING GP-GRADE CONTROL  
9. 442-8000 Y [1] C-FRAME GP  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270832
 

387-8475: BULLDOZER AR-PWR ANGLE & TILT

387-8475 BULLDOZER AR-PWR ANGLE & TILT
S/N EG81-UP
Type 2
AN ATTACHMENT
i06238579 SEBP7227
3878475 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 381-1880 Y [1] LINK GP-PITCH  
3. 382-4274 Y [1] CYLINDER & LINES GP-LIFT (RH)  
4. 382-4275 Y [1] CYLINDER & LINES GP-LIFT (LH)  
5. 470-7319 CY [1] LINES GP-ANGLE & TILT  
6. 460-2221 CY [1] BLADE GP-ANGLING  
7. 455-6756 CY [2] CYLINDER GP-ANGLING  
8. 434-9075 Y [1] WIRING GP-GRADE CONTROL  
9. 442-8000 Y [1] C-FRAME GP  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270833
 

442-8471: BULLDOZER AR-PWR ANGLE & TILT

442-8471 BULLDOZER AR-PWR ANGLE & TILT
S/N CR31-UP; SGA1-UP; STE1-UP
FOR USE WITH REAR MOUNTED COUNTERWEIGHT WITH 2 EXTRA WEIGHTS, RIPPER AR, WINCH AR
AN ATTACHMENT
i05939292 SEBP7227
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] BLADE GP-ANGLING  
  442-8000 Y [1] C-FRAME GP  
  382-4274 Y [1] CYLINDER & LINES GP-LIFT (RH)  
  382-4275 Y [1] CYLINDER & LINES GP-LIFT (LH)  
  434-4591 Y [1] CYLINDER GP-ANGLING  
  227-8893 Y [1] CYLINDER GP-TILT  
  387-8459 Y [1] LINES GP-ANGLE & TILT  
  381-1880 Y [1] LINK GP-PITCH  
  434-9075 Y [1] WIRING GP-GRADE CONTROL  
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270834
 

457-0859: BULLDOZER AR-PWR ANGLE & TILT

457-0859 BULLDOZER AR-PWR ANGLE & TILT
S/N EG61-UP
FOR USE WITH REAER MOUNTED COUNTERWEIGHT WITH TWO EXTRA COUNTERWEIGHT SLABS, A RIPPER OR A WINCH, CONTROL ACCUGRADE & CGC READY VPAT
AN ATTACHMENT
i06239928 SEBP7227
4570859 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 381-1880 Y [1] LINK GP-PITCH  
2. 382-4274 Y [1] CYLINDER & LINES GP-LIFT (RH)  
3. 387-8457 Y [1] C-FRAME GP  
4. 453-1022 Y [1] WIRING GP-GRADE CONTROL  
5. 453-8527 Y [1] CYLINDER GP-TILT  
6. 455-6755 Y [1] CYLINDER GP-ANGLING (RH)  
7. 455-6756 Y [1] CYLINDER GP-ANGLING (LH)  
8. 456-4989 Y [1] CYLINDER & LINES GP-LIFT (LH)  
9. 460-2218 Y [1] BLADE & EDGE GP-ANGLING  
10. 470-7319 Y [1] LINES GP-ANGLE & TILT  
   
  7J-2608 F [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270835
 

457-0860: BULLDOZER AR-PWR ANGLE & TILT

457-0860 BULLDOZER AR-PWR ANGLE & TILT
S/N EG81-UP
AN ATTACHMENT
i06251872 SEBP7227
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  460-2221 Y [1] BLADE GP-ANGLING  
  442-8000 Y [1] C-FRAME GP  
  382-4274 Y [1] CYLINDER & LINES GP-LIFT (RH)  
  456-4989 Y [1] CYLINDER & LINES GP-LIFT (LH)  
  455-6755 Y [1] CYLINDER GP-ANGLING  
  455-6756 Y [1] CYLINDER GP-ANGLING  
  453-8527 Y [1] CYLINDER GP-TILT  
  470-7319 Y [1] LINES GP-ANGLE & TILT  
  381-1880 Y [1] LINK GP-PITCH  
  453-1022 Y [1] WIRING GP-GRADE CONTROL  
  7J-2608 [1] PLATE & FILM GP  
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270836
 

387-8457: C-FRAME GP

387-8457 C-FRAME GP
S/N EG61-UP
PART OF 387-8449, 457-0859 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i05931773 SEBP7227
3878457 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 104-4817 [1] PIN  
3. 193-3063 [2] CAP AS-BEARING  
4. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
5. 223-3279 [1] RETAINER  
6. 226-7191 [2] RETAINER  
7. 229-1516 [2] SPACER (64X72X18-MM THK)  
9. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
10. 282-6604 [2] PIN  
11. 292-6035 [1] PLATE-RETAINER  
12. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
13. 387-8458 [1] C-FRAME AS  
13A. 1K-6985 [4] RING-RETAINING  
13B. 9M-1328 [2] BEARING-SELF-ALIGNING  
13C. 274-1715 [2] STEP AS  
13D. 233-3642 [1] TRUNNION AS  
13E. 282-6605 [2] BEARING  
14. 418-1226 [1] PIN  
15. 423-0715 [2] PIN  
16. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
17. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
18. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
19. 7X-2546 M [4] BOLT (M10X1.5X180-MM)  
20. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
21. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
23. 8T-7338 M [3] BOLT (M16X2X45-MM)  
24. 9J-4782 [2] PROTECTOR  
25. 9X-2027 [8] WASHER (11X18X2-MM THK)  
26. 9X-8258 [4] WASHER (33X56X6-MM THK)  
27. 9W-7602 B [52] SHIM (0.8-MM THK)  
28. 514-7641 [4] SPACER  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP72270837
 

442-8000: C-FRAME GP

442-8000 C-FRAME GP
S/N CR31-UP; EG81-UP; SGA1-UP; STE1-UP
PART OF 387-8475, 442-8471, 457-0860 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i05931818 SEBP7227
4428000 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 104-4817 [1] PIN  
3. 193-3063 [2] CAP AS-BEARING  
4. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
5. 223-3279 [1] RETAINER  
6. 226-7191 [2] RETAINER  
7. 229-1516 [2] SPACER (64X72X18-MM THK)  
9. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
10. 282-6604 [2] PIN  
11. 292-6035 [1] PLATE-RETAINER  
12. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
13. 418-1226 [1] PIN  
14. 423-0715 [2] PIN  
15. 442-8001 [1] C-FRAME AS  
15A. 1K-6985 [4] RING-RETAINING  
15B. 9M-1328 [2] BEARING-SELF-ALIGNING  
15C. 274-1715 [2] STEP AS  
15D. 233-3642 [1] TRUNNION AS  
15E. 282-6605 [2] BEARING  
16. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
17. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
18. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
19. 7X-2546 M [4] BOLT (M10X1.5X180-MM)  
20. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
21. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
23. 8T-7338 M [3] BOLT (M16X2X45-MM)  
24. 9J-4782 [2] PROTECTOR  
25. 9X-2027 [8] WASHER (11X18X2-MM THK)  
26. 9X-8258 [4] WASHER (33X56X6-MM THK)  
27. 9W-7602 B [52] SHIM (0.8-MM THK)  
28. 514-7641 [4] SPACER  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP72270838
 

382-4149: LINES GP-GREASE

382-4149 LINES GP-GREASE
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 382-4250 LINES GP-GREASE
Type 1
AN ATTACHMENT
i05915920 SEBP7227
3824149 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 8C-6915 [1] ADAPTER-BULKHEAD  
3. 382-4154 [1] PLATE  
4. 382-4269 I [1] HOSE AS  
5. 124-0174 [1] CLIP (LOOP)  
6. 148-8316 [1] CONNECTOR AS  
  6V-8647 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
7. 310-7300 [1] CLIP  
8. 4D-9517 [1] CLIP (SLOT)  
9. 6V-8397 [1] SEAL-O-RING  
10. 6V-9168 [1] NUT (11/16-16-THD)  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
13. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
16. 8X-5379 [1] SPACER (12.52X17.14X40-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP72270839
 

382-4149: LINES GP-GREASE

382-4149 LINES GP-GREASE
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 382-4250 LINES GP-GREASE
Type 2
AN ATTACHMENT
i06870428 SEBP7227
3824149 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 8C-6915 [1] ADAPTER-BULKHEAD  
3. 382-4154 [1] PLATE  
4. 488-9160 CI [1] HOSE AS  
5. 124-0174 C [2] CLIP (LOOP)  
6. 148-8316 [1] CONNECTOR AS  
  6V-8647 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
7. 310-7300 [1] CLIP  
9. 6V-8397 [1] SEAL-O-RING  
10. 6V-9168 [1] NUT (11/16-16-THD)  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
13. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
16. 8X-5379 [1] SPACER (12.52X17.14X40-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Trunnion Bearing - Adjust
D6T Track-Type Tractor
Bulldozer Blade Pitch
D6T Track-Type Tractor
Bulldozer - Lubricate - Variable Pitch Angle Tilt Blade
D6T Track-Type Tractor
Special Instruction
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
Replacing The VPAT Blade Angle Cylinder On Certain D6T Track-Type Tractors {5101, 6050, 6052}
Replacing The VPAT Blade Angle Cylinder On Certain D6T Track-Type Tractors {5101, 6050, 6052}
Compatibility of The Bulldozer Arrangement, Rear Attachments, and Final Drive Guards of D6T Track-Type Tractors {5163, 6050, 6060, 6310, 7000, 7056}
Compatibility of The Bulldozer Arrangement, Rear Attachments, and Final Drive Guards of D6T Track-Type Tractors {5163, 6050, 6060, 6310, 7000, 7056}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VPAT BLADE ANGLE CYLINDER ON CERTAIN D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VPAT BLADE ANGLE CYLINDER ON CERTAIN D6T TRACK-TYPE TRACTORS
Disassembly and Assembly
Bulldozer Blade - Remove and Install
D6T Track-Type Tractor Machine Systems
Service Magazine
Install Stable Blade Hardware On Certain D6T and D7E Track-Type Tractors {6050, 6051, 6052, 6060, 6078, 6701}
2015/02/27
An Improved Angle Cylinder Group Is Available For Certain D6T VPAT Track-Type Tractors {5101, 6050, 6052}
An Improved Angle Cylinder Group Is Available For Certain D6T VPAT Track-Type Tractors {5101, 6050, 6052}
Service Replacement Options Now Available For The Pitch Link On Certain D6T VPAT Track-Type Tractors {6050, 6052, 6079, 6081}
Service Replacement Options Now Available For The Pitch Link On Certain D6T VPAT Track-Type Tractors {6050, 6052, 6079, 6081}

Caterpillar Parts SIS Catalog D6T LGPPAT :

BULLDOZER AR-PWR ANGLE & TILT
387-8449 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
387-8449 BULLDOZER AR-PWR ANGLE & TILT
VALVE GP-SOLENOID
329-5064 VALVE GP-SOLENOID
VALVE GP-SOLENOID
313-7668 VALVE GP-SOLENOID
VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
VALVE GP-SHUTTLE
260-8590 VALVE GP-SHUTTLE
VALVE GP-RELIEF
9T-3533 VALVE GP-RELIEF
BULLDOZER AR-PWR ANGLE & TILT
387-8475 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
387-8475 BULLDOZER AR-PWR ANGLE & TILT
442-8471 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
457-0859 BULLDOZER AR-PWR ANGLE & TILT
457-0860 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP
387-8457 C-FRAME GP
C-FRAME GP
442-8000 C-FRAME GP
LINES GP-GREASE
382-4149 LINES GP-GREASE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.