AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

460-2222 BLADE & EDGE GP-ANGLING S/N EG81-UP PART OF 460-2221 BLADE GP-ANGLING AN ATTACHMENT D6T LGPPAT


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP

TRACK-TYPE TRACTOR D6T LGPPAT TRACK-TYPE TRACTOR CR3
 D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering CR300001-UP (MACHINE) POWERED BY C9.3 Engine SEBP7227 D6T LGPPAT CR3   (2014)

WORK TOOLS

BLADE GP
BLADE & EDGE GP-ANGLING
460-2218 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
460-2219 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
460-2222 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
481-4895 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
481-4896 BLADE & EDGE GP-ANGLING
BLADE GP-ANGLING
387-8477 BLADE GP-ANGLING
 

#SEBP72270990
 

460-2222: BLADE & EDGE GP-ANGLING

460-2222 BLADE & EDGE GP-ANGLING
S/N EG81-UP
PART OF 460-2221 BLADE GP-ANGLING
AN ATTACHMENT
i06238590 SEBP7227
4602222 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-3290 Y [1] EDGE GP-BIT & CUTTING  
2. 460-2223 [1] BLADE AS  
2A. 214-2294 [1] BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270991
 

481-4895: BLADE & EDGE GP-ANGLING

481-4895 BLADE & EDGE GP-ANGLING
S/N EG61-UP
PART OF 387-8449 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i06632240 SEBP7227
4814895 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 9J-4782 [1] PROTECTOR  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 104-4817 [1] PIN  
5. 214-2295 [2] ADAPTER  
6. 223-3279 [1] RETAINER  
7. 292-6035 [1] PLATE-RETAINER  
8. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
9. 334-1930 [1] PLATE GP-MOUNTING  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
10. 460-2431 [4] PAD  
11. 499-9044 [2] RETAINER  
12. 468-0944 [2] PIN  
13. 473-4511 [4] SPACER (61.91X69.85X34-MM THK)  
14. 418-1226 [1] PIN  
15. 481-4896 Y [1] BLADE & EDGE GP-ANGLING  
16. 7X-0515 [5] WASHER-HARD (17X35X5-MM THK)  
17. 7X-2577 M [8] BOLT (M24X3X90-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
20. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
23. 8T-7338 M [5] BOLT (M16X2X45-MM)  
24. 214-2286 B [12] SHIM (0.8-MM THK)  
25. 508-4335 [1] RETAINER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270992
 

481-4896: BLADE & EDGE GP-ANGLING

481-4896 BLADE & EDGE GP-ANGLING
S/N EG61-UP
PART OF 481-4895 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i06632260 SEBP7227
4814896 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] EDGE GP-BIT & CUTTING (WIDE)  
2. 481-4897 [1] BLADE AS-ANGLING  
2A. 214-2294 [1] BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270993
 

387-8477: BLADE GP-ANGLING

387-8477 BLADE GP-ANGLING
S/N EG81-UP
PART OF 387-8475 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i05931802 SEBP7227
3878477 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4782 [1] PROTECTOR  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 104-4817 [1] PIN  
4. 214-2295 [2] ADAPTER  
5. 223-3279 [1] RETAINER  
6. 226-7191 [2] RETAINER  
7. 226-7192 [4] SPACER (50.8X57.15X25-MM THK)  
8. 245-1168 [3] PIN  
9. 279-6640 [4] PAD  
10. 292-6035 [1] PLATE-RETAINER  
11. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
12. 334-1930 [1] PLATE GP-MOUNTING  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
13. 387-8476 Y [1] BLADE & EDGE GP-ANGLING  
14. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
15. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
16. 7X-2577 M [8] BOLT (M24X3X90-MM)  
17. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
18. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
22. 8T-7338 M [3] BOLT (M16X2X45-MM)  
23. 214-2286 B [8] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270994
 

430-5001: BLADE GP-ANGLING

430-5001 BLADE GP-ANGLING
S/N FW61-UP
PART OF 442-8471 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i05939554 SEBP7227
4305001 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 104-4817 [1] PIN  
4. 214-2286 B [8] SHIM (0.8-MM THK)  
5. 214-2295 [2] ADAPTER  
6. 223-3279 [1] RETAINER  
7. 226-7191 [2] RETAINER  
8. 226-7192 [4] SPACER (50.8X57.15X25-MM THK)  
9. 245-1168 [3] PIN  
10. 257-0205 [4] PIN-DOWEL  
11. 266-4761 [4] PIN AS  
12. 279-6640 [4] PAD  
13. 292-6035 [1] PLATE-RETAINER  
14. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
15. 334-1930 [1] PLATE GP-MOUNTING  
16. Y [1] BLADE & EDGE GP-ANGLING  
17. [2] ARM AS-SUPPORT  
18. 2U-9234 [4] BUSHING  
19. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
20. 7X-0618 [4] WASHER-HARD (13.5X40X5-MM THK)  
21. 7X-2577 M [8] BOLT (M24X3X90-MM)  
22. 8D-3791 [8] PIN  
23. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
24. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
25. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
26. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
28. 8T-7338 M [3] BOLT (M16X2X45-MM)  
29. 9J-4782 [5] PROTECTOR  
30. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270995
 

460-2221: BLADE GP-ANGLING

460-2221 BLADE GP-ANGLING
S/N EG81-UP
PART OF 387-8475, 457-0860 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i06238588 SEBP7227
4602221 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 9J-4782 [1] PROTECTOR  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 104-4817 [1] PIN  
5. 214-2295 [2] ADAPTER  
6. 223-3279 [1] RETAINER  
7. 292-6035 [1] PLATE-RETAINER  
8. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
9. 334-1930 [1] PLATE GP-MOUNTING  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
  334-1931 [1] PLATE  
10. 460-2222 Y [1] BLADE & EDGE GP-ANGLING  
11. 460-2431 [4] PAD  
12. 460-2504 [2] RETAINER  
13. 468-0944 [2] PIN  
14. 473-4511 [4] SPACER (61.91X69.85X34-MM THK)  
15. 473-4512 [1] PIN  
16. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
17. 7X-2577 M [8] BOLT (M24X3X90-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
20. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
23. 8T-7338 M [3] BOLT (M16X2X45-MM)  
24. 214-2286 B [12] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP72270996
 

219-4270: EDGE GP-BIT & CUTTING

219-4270 EDGE GP-BIT & CUTTING
S/N EG61-UP
PART OF 387-8455, 460-2219, 481-4896 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i02436890 SEBP7227
2194270 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
2. 9W-8875 [1] BIT-END (LH)  
3. 219-4599 [2] EDGE-CUTTING  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72270997
 

223-3290: EDGE GP-BIT & CUTTING

223-3290 EDGE GP-BIT & CUTTING
S/N EG81-UP
PART OF 387-8476, 460-2222 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i02436745 SEBP7227
2233290 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
2. 9W-8875 [1] BIT-END (LH)  
3. 229-6958 [2] EDGE-CUTTING  
4. 2J-3506 [34] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [34] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72270998
 

430-4990: EDGE GP-CUTTING

430-4990 EDGE GP-CUTTING
S/N FW61-UP
PART OF 430-5000 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i05939559 SEBP7227
4304990 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 430-4991 [2] EDGE-CUTTING  
2. 430-4992 [2] BIT-END  
3. 2J-3506 [36] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [36] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [36] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP72270999
 

334-6841: INSTALLATION AR-WINCH

334-6841 INSTALLATION AR-WINCH
S/N CR31-UP; SGA1-UP; STE1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
i05319652 SEBP7227
  For full view, you need register

Parts for your D6T LGPPAT TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3W-1356 Y [1] GUARD GP-TRANSMISSION  
  396-2120 Y [1] WIRING GP-WINCH  
   
  7X-7644 [1] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON WINCH DRAWBAR CLEVIS)
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
Blade Rework Procedure To Update To A Larger Angle Cylinder Pin And Bearing On Certain D6T VPAT Track-Type Tractors {6052, 6060, 6701}
Blade Rework Procedure To Update To A Larger Angle Cylinder Pin And Bearing On Certain D6T VPAT Track-Type Tractors {6052, 6060, 6701}
Installation Procedure For Updating Angle Cylinder Pins on Certain D6T Track-Type Tractors {6052, 6060, 6701}
Installation Procedure For Updating Angle Cylinder Pins on Certain D6T Track-Type Tractors {6052, 6060, 6701}
Compatibility of The Bulldozer Arrangement, Rear Attachments, and Final Drive Guards of D6T Track-Type Tractors {5163, 6050, 6060, 6310, 7000, 7056}
Compatibility of The Bulldozer Arrangement, Rear Attachments, and Final Drive Guards of D6T Track-Type Tractors {5163, 6050, 6060, 6310, 7000, 7056}
Specifications
C-Frame
D6T Track-Type Tractor Systems
Disassembly and Assembly
Bulldozer Blade (VPAT) - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Blade - Remove and Install
D6T Track-Type Tractor Machine Systems
Service Magazine
Install Stable Blade Hardware On Certain D6T and D7E Track-Type Tractors {6050, 6051, 6052, 6060, 6078, 6701}
2015/02/27
An Improved Tilt Cylinder Guard is now Used on Certain D6T Track-Type Tractors {6060}
An Improved Tilt Cylinder Guard is now Used on Certain D6T Track-Type Tractors {6060}
Improved Center Blade Trunnion Serviceability And Trunnion Cap Retention Is Available For Certain D6T and D6R III VPAT Track-Type Tractors {6060}
Improved Center Blade Trunnion Serviceability And Trunnion Cap Retention Is Available For Certain D6T and D6R III VPAT Track-Type Tractors {6060}
Improved Angle Cylinder Pin Designs Are Now Available For Certain D6T Track-Type Tractors {6052, 6060, 6701}
Improved Angle Cylinder Pin Designs Are Now Available For Certain D6T Track-Type Tractors {6052, 6060, 6701}

Caterpillar Parts SIS Catalog D6T LGPPAT :

BLADE & EDGE GP-ANGLING
460-2219 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
460-2218 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
430-5000 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
387-8476 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
387-8455 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
387-8454 BLADE & EDGE GP-ANGLING
WIPER GP-WINDOW
382-8925 WIPER GP-WINDOW
WIPER GP-WINDOW
382-8925 WIPER GP-WINDOW
BLADE & EDGE GP-ANGLING
481-4895 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
481-4896 BLADE & EDGE GP-ANGLING
BLADE GP-ANGLING
387-8477 BLADE GP-ANGLING
BLADE GP-ANGLING
430-5001 BLADE GP-ANGLING
BLADE GP-ANGLING
460-2221 BLADE GP-ANGLING
EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
223-3290 EDGE GP-BIT & CUTTING
EDGE GP-CUTTING
430-4990 EDGE GP-CUTTING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.