AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

273-6667 LINES GP-TURBOCHARGER OIL S/N TXG2819-UP; LHX26318-99999 980G WHEEL LOADER


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
COOLING SYSTEM
CONVERSION GP
COOLER GP
PUMP GP-WATER
LINES GP-WATER
PUMP GP-WATER
RADIATOR GP
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

WHEEL LOADER 980G WHEEL LOADER 2SR
 C15 Engine Emissions Retrofit Repower Tier III for 980G Wheel Loader 2SR00001-UP (MACHINE) SEBP7404 980G 2SR   (1996)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
273-6667 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
267-8584 CARTRIDGE GP-TURBOCHARGER
COVER GP-TURBOCHARGER
237-1964 COVER GP-TURBOCHARGER
SHIELD GP-HEAT
254-1713 SHIELD GP-HEAT
TURBOCHARGER GP
262-0974 TURBOCHARGER GP
TURBOCHARGER GP
382-7898 TURBOCHARGER GP
TURBOCHARGER GP
396-3327 TURBOCHARGER GP
 

#SEBP74040070
 

273-6667: LINES GP-TURBOCHARGER OIL

273-6667 LINES GP-TURBOCHARGER OIL
S/N TXG2819-UP; LHX26318-99999
i04850539 SEBP7404
2736667 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7559 [1] GASKET  
2. 210-9246 [1] SEAL-O-RING  
3. 217-2610 [1] TUBE AS  
4. 269-8788 [2] CLAMP-BAND  
5. 246-6036 [1] HOSE  
6. 255-0746 [1] TUBE AS  
7. 255-0751 [1] TUBE AS  
8. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
9. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
11. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
12. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 7N-8875 [1] GASKET  
14. 148-8315 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8642 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
 

#SEBP74040071
 

161-4113: PUMP GP-ENGINE OIL

161-4113 PUMP GP-ENGINE OIL
S/N TXG2819-UP; LHX26318-99999
i04839949 SEBP7404
1614113 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7238 [1] SHAFT AS-PUMP DRIVE (8-TEETH)  
2. 1W-7239 [1] SHAFT AS-IDLER (8-TEETH)  
3. 2P-3205 [4] BOLT-WASHER HEAD (3/8-16X1.75-IN)  
4. 2S-2760 [1] SPRING  
5. 6N-1931 [1] PLUNGER  
6. 9Y-1792 [1] RETAINER  
7. 235-1587 [1] BODY AS  
  7N-2156 [2] BUSHING  
  8M-8489 [2] DOWEL  
8. 127-6356 [1] COVER AS-PUMP  
  8S-6511 [2] BUSHING  
9. 1M-0644 [2] BOLT (3/8-16X2.25-IN)  
10. 2S-7905 [1] PLUG-PIPE  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP74040072
 

340-8890: CONVERSION GP-COOLING SYSTEM

340-8890 CONVERSION GP-COOLING SYSTEM
S/N 2SR1-UP
PART OF 340-8887 CONVERSION AR-MACHINE
FOR USE WITH C15 EMISSIONS RETROFIT REPOWER TIER III FOR 980G WHEEL LOADER
i05763425 SEBP7404
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  173-0506 Y [1] LINES GP-WATER (RADIATOR)  
  340-8901 Y [1] RADIATOR GP  
  175-4203 Y [1] SHIELD GP-ENGINE COMPARTMENT  
  6V-9872 [1] CONNECTOR  
  124-2116 [1] COUPLING-PERMANENT  
  124-2144 [1] COUPLING AS-PERMANENT  
  122-6869 E HOSE-HYDRAULIC (26-CM)  
  6D-7128 [1] SEAL-O-RING  
  6V-9027 [1] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP74040073
 

214-9045: COOLER & LINES GP

214-9045 COOLER & LINES GP -ENGINE, POWER TRAIN COOLERS
S/N TXG2819-UP; LHX26318-99999
i04850537 SEBP7404
2149045 COOLER & LINES GP Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-0795 [2] GASKET  
2. 3S-9643 [2] SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)  
3. 4N-1156 [1] GASKET-REGULATOR COVER  
4. 4N-1199 [2] CLIP  
5. 8T-4983 [2] CLAMP-HOSE  
6. 9Y-4104 [1] HOSE  
7. 125-0434 [1] SEAL-INTEGRAL  
8. 126-4935 [1] SEAL-INTEGRAL  
9. 133-0125 [1] CORE AS-ENGINE OIL COOLER  
10. 135-5577 [1] CORE AS-POWER TRAIN OIL COOLER  
11. 135-7076 [1] BONNET-INLET  
12. 137-7331 [1] HOUSING-REGULATOR  
13. 139-3550 [1] GASKET-REGULATOR (HOUSING)  
14. 143-9393 [1] STUD (3/8-16-THD)  
15. 157-0670 [1] CAP-DUST  
16. 161-3565 [1] COVER-WATER PUMP  
17. 170-4673 [1] BONNET-INLET  
18. 173-1583 [1] BRACKET AS  
  8T-3490 M NUT-WELD (M10X1.5-THD)  
19. 187-6237 [1] ADAPTER  
20. 205-9293 [1] BONNET  
21. 235-8159 [1] BRACKET AS  
22. 239-6304 [1] MANIFOLD-HOUSING  
23. 248-5513 [2] REGULATOR-TEMPERATURE (92-DEG C)(COOLANT)  
24. 353-5126 [3] PLUG AS  
    (EACH INCLUDES)
  6V-6609 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
25. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
26. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
27. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
28. 0S-1591 [3] BOLT (3/8-16X1.5-IN)  
29. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
30. 0T-0065 [2] BOLT (3/8-16X3.5-IN)  
31. 109-0077 [3] SEAL-O-RING  
32. 377-9603 [1] VALVE AS-FLUID SAMPLING  
  6V-9027 [1] SEAL-O-RING  
  154-9023 [1] VALVE-SAMPLING  
33. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
34. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
35. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
36. 304-8008 [1] PLUG AS  
36A. 6V-9027 [1] SEAL-O-RING  
36B. 9S-8002 [1] PLUG (7/16-20-THD)  
37. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
38. 337-8778 [1] ADAPTER AS  
  3P-1932 [1] ADAPTER  
  6V-6609 [1] SEAL-O-RING  
39. 4F-0411 [3] BOLT (3/8-16X6.5-IN)  
40. 5B-2638 [4] BOLT (3/8-16X5.25-IN)  
41. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 7X-0333 [1] BOLT (1/2-13X4.75-IN)  
45. 7X-7731 [4] PLUG-PIPE (3/4-14-THD)  
46. 8S-9089 [5] BOLT (1/2-13X4.5-IN)  
47. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
49. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
50. 9X-6458 [5] WASHER-HARD (10.2X22.5X3-MM THK)  
51. 9X-8873 [2] BOLT (1/2-13X2.25-IN)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP74040074
 

109-2373: FASTENER GP-WATER PUMP

109-2373 FASTENER GP-WATER PUMP
S/N TXG2819-UP; LHX26318-99999
FOR USE WHEN ALTERNATOR MOUNTING BRACKET IS NOT INSTALLED
CANNOT BE USED WITH RH FRONT OIL GUIDE
i04838172 SEBP7404
1092373 FASTENER GP-WATER PUMP Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
 

#SEBP74040075
 

173-0506: LINES GP-WATER

173-0506 LINES GP-WATER -RADIATOR
S/N 2SR1-UP
PART OF 340-8890 CONVERSION GP-COOLING SYSTEM
i05763430 SEBP7404
1730506 LINES GP-WATER Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4278 [14] CLAMP-HOSE  
2. 5P-1265 E [2] HOSE (18-CM EACH)  
3. 5P-1262 E HOSE (18-CM)  
4. 5D-1026 [1] CLAMP-BAND  
5. 6V-1355 [2] ELBOW  
6. 6V-7238 [1] VALVE-SHUTOFF  
7. 7X-7958 [2] CLAMP-HOSE  
8. 8T-6675 [8] CLAMP-HOSE  
9. 9Y-9236 [1] GAUGE-SIGHT  
10. 053-2313 [1] CONNECTOR  
11. 061-7208 [1] CLAMP-TUBE  
12. 106-4572 [5] HOSE-RADIATOR (RADIATOR)  
13. 135-6928 [1] ANGLE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 161-0018 [1] HOSE  
15. 177-3262 [1] BRACKET  
16. 192-7431 I [1] HOSE AS  
17. 208-6177 [1] TANK GP-RADIATOR TOP  
  208-6179 [1] TANK AS-COOLANT  
17A. 031-1119 [1] CAP AS-RADIATOR  
18. 209-3854 [1] TUBE AS  
19. 209-6949 [1] TUBE AS  
20. 209-6950 I [1] HOSE AS  
21. 209-7710 I [1] HOSE AS  
22. 000-7246 [1] ELBOW  
23. 3J-1907 [1] SEAL-O-RING  
24. 3J-7354 [4] SEAL-O-RING  
25. 3K-0360 [1] SEAL-O-RING  
26. 4J-5477 [5] SEAL-O-RING  
27. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
28. 5P-2228 [1] BOLT (1/2-13X1-IN)  
29. 6V-8397 [2] SEAL-O-RING  
30. 6V-8636 [1] CONNECTOR  
31. 6V-8647 [1] CONNECTOR  
32. 6V-8780 [1] TEE  
33. 6V-9849 [1] ELBOW  
34. 7D-7233 [2] CLIP (LOOP)  
35. 7M-8485 [1] SEAL-O-RING  
36. 8C-6866 [1] CONNECTOR  
37. 8C-6869 [1] CONNECTOR  
38. 8M-2770 [2] CLIP (LOOP)(LOOP)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4133 M [1] NUT (M10X1.5-THD)  
41. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
42. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
43. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
44. 5P-0767 E HOSE (33-CM)  
45. 5P-6442 E HOSE (67-CM)  
45A. 5P-6442 E HOSE (43-CM)  
46. 5P-1251 E HOSE (113-CM)  
47. 7Y-1976 E HOSE-WATER (181-CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP74040076
 

174-5986: PUMP GP-WATER

174-5986 PUMP GP-WATER
S/N TXG2819-UP; LHX26318-99999
HEAVY DUTY PUMP
i04855094 SEBP7404
1745986 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-0211 Y [1] PUMP GP-WATER  
2. 4P-2383 [1] ADAPTER  
3. 9M-3786 [1] SEAL-O-RING  
4. 122-3772 [1] SEAL-O-RING  
5. 109-0077 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74040077
 

352-0211: PUMP GP-WATER

352-0211 PUMP GP-WATER
S/N TXG2819-UP; LHX26318-99999
PART OF 174-5986 PUMP GP-WATER
i04855152 SEBP7404
3520211 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-5718 [1] HOUSING-WATER PUMP  
2. 129-9907 [1] IMPELLER-PUMP  
3. 9M-6527 W [1] WASHER-HARD (10.2X25.5X5-MM THK)  
4. 0S-1591 W [1] BOLT (3/8-16X1.5-IN)  
5. 1A-1135 W [1] BOLT (5/8-11X2-IN)  
6. 349-2654 W [1] SEAL-WATER PUMP  
7. 153-9023 [1] GEAR (74-TEETH)  
8. 153-1256 W [1] SEAL-LIP TYPE  
9. 135-4928 W [1] SHAFT-WATER PUMP  
10. 5S-0581 W [1] WASHER-HARD (17X38X8-MM THK)  
11. 1B-7182 [4] BOLT (5/16-18X1.25-IN)  
12. 108-7930 W [1] BEARING AS-ROLLER  
13. 136-1107 W [1] RETAINER  
14. 136-3742 W [1] FILTER  
   
    AVAILABLE REPAIR KIT(S):
  377-7037 ABW [1] KIT-WATER PUMP  
    (INCLUDES BOLTS, WASHERS, BEARINGS, FITLER, SEALS, RETAINER, & SHAFT
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  W   KIT MARKED W INCLUDES PART(S) MARKED W
 

#SEBP74040078
 

340-8901: RADIATOR GP

340-8901 RADIATOR GP
S/N 2SR1-UP
PART OF 340-8890 CONVERSION GP-COOLING SYSTEM
i05763432 SEBP7404
3408901 RADIATOR GP Parts scheme 3408901 RADIATOR GP Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-1326 [1] SPACER (0.688X1.5X0.5-IN THK)  
2. 6I-2431 [6] SEAL  
3. 6I-2435 [6] SPACER (80X108X25-MM THK)  
4. 8T-4159 [1] BUMPER  
5. 112-5344 [1] LATCH AS-DOOR  
6. 112-9486 [5] RETAINER  
7. 175-4245 [1] TANK AS-RADIATOR BOTTOM  
8. 175-4246 [1] SUPPORT AS (RH)  
  9R-2821 M [2] BOSS (M10X1.5X15-MM)  
9. 175-4247 [1] SUPPORT AS (LH)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  9R-2821 M [2] BOSS (M10X1.5X15-MM)  
10. 175-4248 [1] SHROUD  
11. 175-4250 [1] GUARD AS  
  8T-3490 M [9] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [10] NUT-WELD (M12X1.75-THD)  
  204-6529 [7] WASHER (13.8X50X5-MM)  
12. 175-4251 [1] SUPPORT AS (UPPER)  
  8T-3490 M [18] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [6] NUT-WELD (M12X1.75-THD)  
13. 175-4252 [1] BRACKET AS  
14. 175-4257 [1] SUPPORT AS  
  8T-3490 M [13] NUT-WELD (M10X1.5-THD)  
15. 175-4260 [1] SUPPORT AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
16. 175-6430 [1] RETAINER AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
  112-9486 [1] RETAINER  
17. 176-0329 [1] BAFFLE  
18. 176-5804 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
19. 177-9009 [1] BAFFLE AS (RH)  
  6V-4604 [9] RIVET-POP  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
20. 177-9010 [1] BAFFLE AS (LH)  
  6V-4604 [3] RIVET-POP  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
21. 189-5594 [2] COVER AS  
    (EACH INCLUDES)
  194-5278 [1] HINGE  
22. 192-7356 [1] ADAPTER  
23. 204-5150 [1] BAFFLE AS (LH)  
  6B-4594 [3] RIVET  
24. 204-5326 [1] BAFFLE AS (RH)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
25. 205-4163 [1] BAFFLE AS (RH)  
  6B-4594 [10] RIVET  
  9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
  130-0601 [1] STRIP  
26. 205-4165 [1] BAFFLE AS (LH)  
  6B-4594 [11] RIVET  
  9X-6165 [2] WASHER (6.5X22X2.5-MM THK)  
  130-0601 [1] STRIP  
27. 205-4167 [1] BAFFLE AS  
  6V-4604 [6] RIVET-POP  
  9X-2026 [6] WASHER (6.5X17X1-MM THK)  
28. 205-4169 [1] BRACKET AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
29. 205-4171 [1] BRACKET AS  
30. 212-7261 [1] BAFFLE  
31. 212-7786 [1] CORE AS-HYDRAULIC OIL COOLER  
32. 214-5704 [2] HINGE AS  
33. 234-8811 [6] CORE AS-RADIATOR  
34. 235-5874 [1] BAFFLE  
35. 237-2555 [1] AFTERCOOLER AS-AIR  
36. 255-6805 Y [1] MOTOR GP-PISTON (HYDRAULIC FAN)  
37. 262-6813 [1] SPIDER AS-FAN (8-BLADE)  
38. 275-0572 [2] LATCH AS  
39. 293-3081 [2] CAM-LATCH  
40. 121-3307 [2] MOUNT AS-RESILIENT  
41. 3R-8530 [7] BOSS  
42. 5C-2890 M [4] NUT (M6X1-THD)  
43. 5C-7261 M [1] NUT (M8X1.25-THD)  
44. 5C-9553 M [4] BOLT (M6X1X16-MM)  
45. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
46. 5V-8780 [1] KNOB  
47. 7X-0515 [9] WASHER-HARD (17X35X5-MM THK)  
48. 7X-2555 M [7] BOLT (M16X2X80-MM)  
49. 7X-7729 [52] WASHER (11X25X3-MM THK)  
50. 8T-4121 [47] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4132 M [1] NUT (M16X2-THD)  
52. 8T-4133 M [8] NUT (M10X1.5-THD)  
53. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
54. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
55. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
56. 8T-4140 M [1] BOLT (M16X2X60-MM)  
57. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
58. 8T-4195 M [62] BOLT (M10X1.5X30-MM)  
59. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
60. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
61. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
62. 8T-4226 [2] WASHER-PLATED (10.5X45X3-MM THK)  
63. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
64. 8T-6466 M [7] BOLT (M10X1.5X60-MM)  
65. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
66. 5P-5643 D SEAL (0.25-M EACH)  
66A. 5P-5643 D SEAL (0.31-M EACH)  
67. 6V-9335 D SEAL (1-M)  
68. 5P-7483 D SEAL (3.1-M)  
69. 8C-5058 E SEAL (96-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP74040079
 

267-8584: CARTRIDGE GP-TURBOCHARGER

267-8584 CARTRIDGE GP-TURBOCHARGER
S/N TXG2819-UP; LHX26318-99999
PART OF 382-7898 TURBOCHARGER GP
i06922255 SEBP7404
2678584 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-8868 [1] SEAL-RING  
2. 211-2264 [1] RING-PISTON (TURBINE)  
3. 239-5894 [2] BEARING-JOURNAL  
4. 211-2261 [1] BEARING-THRUST  
5. 211-2260 [1] COLLAR-THRUST  
6. 211-2259 [2] RING-PISTON (COMPRESSOR)  
7. 461-3792 [3] WASHER (WEAR)  
8. 461-3728 [3] RING-RETAINING  
9. 156-6964 M [4] BOLT (M8X1.25X30-MM)  
10. 4P-3818 M [3] BOLT (M4X0.7X10-MM)  
  M   METRIC PART
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Service Letter-Australia
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Service Letter-CFEL
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Service Letter-CSARL
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Service Letter-Americas
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Specifications
Turbocharger
3406C Engines for Caterpillar Built Machines
Service Letter-China
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Service Letter-Asia
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Service Letter-APD
Service Letter Cancellation
Service Letter Cancellation
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, AND 826G COMPACTORS; 980G WHEEL LOADERS AND LISTED CIPI MACHINES
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
A NEW MUFFLER SUPPORT BRACKET NEEDS TO BE INSTALLED ON CERTAIN 824G WHEEL TRACTORS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
Disassembly and Assembly
Turbocharger - Remove
980G Wheel Loader Engine Supplement
Turbocharger - Install
980G Wheel Loader Engine Supplement
Turbocharger - Remove
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Install
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
New Hose Clamp For The Air Inlet Hose Has Improved Durability{1071}
1997/12/08
New Turbochargers Feature A Stronger Compressor Wheel {1052}
2000/12/04
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 980G :

LINES GP-ENGINE OIL
219-4443 LINES GP-ENGINE OIL
GAUGE GP-OIL LEVEL (DIPSTICK)
300-7448 GAUGE GP-OIL LEVEL (DIPSTICK)
FUMES DISPOSAL GP
237-1965 FUMES DISPOSAL GP
FILTER GP-ENGINE OIL
263-5373 FILTER GP-ENGINE OIL
FILLER GP-ENGINE OIL
187-6234 FILLER GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
SUPPORT GP-ENGINE
120-5884 SUPPORT GP-ENGINE
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
PUMP GP-ENGINE OIL
161-4113 PUMP GP-ENGINE OIL
340-8890 CONVERSION GP-COOLING SYSTEM
COOLER & LINES GP
214-9045 COOLER & LINES GP
FASTENER GP-WATER PUMP
109-2373 FASTENER GP-WATER PUMP
LINES GP-WATER
173-0506 LINES GP-WATER
PUMP GP-WATER
174-5986 PUMP GP-WATER
PUMP GP-WATER
352-0211 PUMP GP-WATER
RADIATOR GP
340-8901 RADIATOR GP

Truck sale:

Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
 
78,208 
Caterpillar 980G, Wheel Loaders, Construction


 
69,976 
Caterpillar 980G, Wheel Loaders, Construction


Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
ZIEGLER CAT
 
368,500 
Caterpillar 980G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.