HYDRAULIC SYSTEM
HYDRAULIC GPOPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYLINES GP-BOOM
HYDRAULIC SYSTEM
HYDRAULIC GP#SEBP75630330
420-6286: HYDRAULIC AR
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 416-5019 Y | [1] | LINES GP-CONTROL (REAR)(REAR) | ||
| 245-5178 Y | [1] | LINES GP-FRONT (BOOM CYLINDER) | ||
| 245-5179 Y | [1] | LINES GP-FRONT (CONTROL VALVE) | ||
| 248-9833 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 248-9825 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 248-9826 Y | [1] | LINES GP-PILOT (TRAVEL) | ||
| 416-5020 Y | [1] | LINES GP-PILOT (CONTROL VALVE) | ||
| 416-5021 Y | [1] | LINES GP-PILOT (PUMP) | ||
| 416-5022 Y | [1] | LINES GP-PUMP | ||
| 227-0543 Y | [1] | LINES GP-TRAVEL MOTOR (LONG UNDERCARRIAGE)(LONG UNDERCARRIAGE) | ||
| 260-7868 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 422-4080 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 449-9976 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 255-5651 Y | [1] | VALVE GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75630331
456-9471: HYDRAULIC AR
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 416-5019 Y | [1] | LINES GP-CONTROL (REAR) | ||
| 245-5178 Y | [1] | LINES GP-FRONT (BOOM CYLINDER) | ||
| 245-5179 Y | [1] | LINES GP-FRONT (CONTROL VALVE) | ||
| 248-9833 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 248-9825 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 248-9826 Y | [1] | LINES GP-PILOT (TRAVEL) | ||
| 416-5020 Y | [1] | LINES GP-PILOT (CONTROL VALVE) | ||
| 416-5021 Y | [1] | LINES GP-PILOT (PUMP) | ||
| 416-5022 Y | [1] | LINES GP-PUMP | ||
| 227-0543 Y | [1] | LINES GP-TRAVEL MOTOR (LONG UNDERCARRIAGE) | ||
| 260-7868 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 422-4080 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 458-3759 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 255-5651 Y | [1] | VALVE GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75630332
234-6613: LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N PTE1-UP; RCK1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
S/N PTE1-UP; RCK1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 185-8286 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 5. | 234-6615 | [1] | KNOB | |
| 6. | 087-4683 | [2] | LOCKWASHER | |
| 7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP75630333
230-0486: LINES GP-AUXILIARY HYDRAULIC
230-0486 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM, HIGH PRESSURE
S/N PTE1-UP; RCK1-UP
PART OF 479-0920, 480-6806, 501-9233, 501-9234 DISTRIBUTION AR
AN ATTACHMENT
S/N PTE1-UP; RCK1-UP
PART OF 479-0920, 480-6806, 501-9233, 501-9234 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-6677 I | [1] | HOSE AS | |
| 2. | 151-2494 | [4] | BAR | |
| 3. | 153-8798 | [2] | PLATE | |
| 4. | 173-7916 | [8] | CLAMP-HALF | |
| 5. | 187-9845 | [1] | TUBE AS | |
| 6. | 187-9846 | [1] | TUBE AS | |
| 7. | 230-0494 | [2] | SUPPORT AS | |
| 8. | 237-3116 | [1] | TUBE AS | |
| 9. | 237-3117 | [1] | TUBE AS | |
| 10. | 282-5760 I | [1] | HOSE AS | |
| 11. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 12. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 13. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 14. | 1P-5767 | [4] | FLANGE-HALF | |
| 15. | 6V-0400 | [4] | FLANGE-HALF | |
| 16. | 7Y-4538 | [8] | CLAMP-HALF | |
| 17. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 19. | 8T-4184 M | [16] | BOLT (M12X1.75X45-MM) | |
| 20. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 21. | 8T-4223 | [44] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-6868 M | [8] | BOLT (M12X1.75X80-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP75630334
230-0487: LINES GP-AUXILIARY HYDRAULIC
230-0487 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM
S/N PTE1-UP
MEDIUM PRESSURE
AN ATTACHMENT
S/N PTE1-UP
MEDIUM PRESSURE
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-8867 | [2] | CLIP | |
| 2. | 306-1372 C | [1] | PLATE | |
| 3. | 173-7895 | [4] | CLIP | |
| 4. | 179-5260 | [4] | CLIP | |
| 5. | 306-1403 C | [1] | TUBE AS | |
| 6. | 306-1406 C | [1] | TUBE AS | |
| 7. | 237-3122 | [1] | TUBE AS | |
| 8. | 247-9298 | [2] | CLIP AS | |
| 9. | 294-3796 | [1] | PLATE | |
| 10. | 294-3797 | [1] | PLATE | |
| 11. | 247-9312 | [1] | TUBE AS | |
| 12. | 093-1291 | [2] | CLAMP | |
| 13. | 6V-8398 | [4] | SEAL-O-RING | |
| 14. | 7J-9108 | [2] | SEAL-O-RING | |
| 15. | 7Y-4868 | [3] | CLIP | |
| 16. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-7971 C | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 18. | 8T-4139 M | [14] | BOLT (M12X1.75X30-MM) | |
| 19. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 20. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 21. | 8T-4223 C | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4244 M | [12] | NUT (M12X1.75-THD) | |
| 23. | 8T-7929 CM | [2] | BOLT (M12X1.75X180-MM) | |
| 24. | 294-3795 | [2] | CLIP AS | |
| 25. | 294-3794 | [2] | CLIP AS | |
| 26. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 27. | 288-7614 | [1] | CLIP AS | |
| 28. | 149-1738 | [2] | CLIP | |
| 29. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP75630335
237-3181: LINES GP-AUXILIARY HYDRAULIC
237-3181 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N PTE1-UP; RCK1-UP
PART OF 480-6806, 501-9233 DISTRIBUTION AR
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
S/N PTE1-UP; RCK1-UP
PART OF 480-6806, 501-9233 DISTRIBUTION AR
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-7916 | [4] | CLAMP-HALF | |
| 2. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 3. | 253-6453 | [1] | TUBE AS | |
| 4. | 253-6454 | [1] | TUBE AS | |
| 5. | 253-6558 I | [1] | HOSE AS | |
| 6. | 253-6562 I | [1] | HOSE AS | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75630336
237-3183: LINES GP-AUXILIARY HYDRAULIC
237-3183 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N RCK1-UP
FOR USE WITH 2.65-M (8.7-FT) STICK
AN ATTACHMENT
S/N RCK1-UP
FOR USE WITH 2.65-M (8.7-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6780 | [1] | TUBE AS | |
| 2. | 142-6582 | [1] | TUBE AS | |
| 3. | 173-7916 | [4] | CLAMP-HALF | |
| 4. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 5. | 212-5326 I | [1] | HOSE AS | |
| 6. | 356-8081 I | [1] | HOSE AS | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75630337
253-6494: LINES GP-AUXILIARY HYDRAULIC
253-6494 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESSURE
S/N PTE1-UP
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
S/N PTE1-UP
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-6760 | [2] | MANIFOLD | |
| 2. | 149-1738 | [8] | CLIP | |
| 3. | 187-9977 | [2] | PLATE | |
| 4. | 187-9978 | [2] | SUPPORT AS | |
| 5. | 187-9981 | [2] | SUPPORT AS | |
| 6. | 250-1440 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 7X-3164 | [1] | ADAPTER-SWIVEL | ||
| 7. | 253-6455 | [2] | TUBE AS | |
| 8. | 253-6566 I | [2] | HOSE AS | |
| 9. | 6V-8398 | [4] | SEAL-O-RING | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 14. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 7X-2543 JM | [4] | BOLT (M10X1.5X120-MM) | |
| 16. | 8T-4183 JM | [8] | BOLT (M12X1.75X40-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | OPTIONAL DESIGN | |||
| M | METRIC PART | |||
#SEBP75630338
227-0550: LINES GP-BOOM
227-0550 LINES GP-BOOM -1-PIECE LONG BOOM
S/N PTE1-UP; RCK1-UP
PART OF 418-8493, 418-8494 BOOM AR-1 PIECE LONG
AN ATTACHMENT
S/N PTE1-UP; RCK1-UP
PART OF 418-8493, 418-8494 BOOM AR-1 PIECE LONG
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-1674 | [5] | CLIP | |
| 2. | 7Y-4868 | [8] | CLIP | |
| 3. | 187-6817 | [1] | TUBE AS | |
| 4. | 187-6818 | [1] | TUBE AS | |
| 5. | 187-6819 | [1] | TUBE AS | |
| 6. | 187-6820 | [1] | TUBE AS | |
| 7. | 187-6993 | [5] | CLIP | |
| 8. | 202-3763 | [1] | CLIP AS | |
| 9. | 202-3764 | [1] | CLIP AS | |
| 10. | 296-7417 C | [1] | TUBE AS | |
| 11. | 296-7418 C | [1] | TUBE AS | |
| 12. | 236-3005 I | [1] | HOSE AS | |
| 13. | 236-3009 I | [1] | HOSE AS | |
| 14. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 15. | 1P-3704 | [1] | SEAL-RECTANGULAR | |
| 16. | 1P-5767 | [2] | FLANGE-HALF | |
| 17. | 6V-0400 | [6] | FLANGE-HALF | |
| 18. | 6V-9746 | [6] | SEAL-O-RING | |
| 19. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 20. | 8T-4184 M | [10] | BOLT (M12X1.75X45-MM) | |
| 21. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 22. | 8T-4223 | [36] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 24. | 9F-2167 C | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 25. | 6H-3615 | [2] | PLUG-PROTECTION | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP75630339
282-5579: LINES GP-BOOM
282-5579 LINES GP-BOOM -REACH BOOM, STICK LOAD CONTROL
S/N PTE1-UP
PART OF 419-5134 VALVE AR-CHECK & RELIEF
AN ATTACHMENT
S/N PTE1-UP
PART OF 419-5134 VALVE AR-CHECK & RELIEF
AN ATTACHMENT
For full view, you need register
Parts for your 330D2 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [5] | STRAP-CABLE | |
| 2. | 7Y-8309 I | [2] | HOSE AS | |
| 3. | 500-5233 I | [1] | HOSE AS | |
| 4. | 157-9338 C | [1] | PLATE | |
| 5. | 179-5235 | [6] | CLIP | |
| 6. | 282-5641 | [1] | PLATE | |
| 7. | 306-1519 C | [1] | TUBE AS | |
| 8. | 149-5452 | [2] | UNION AS (STRAIGHT) | |
| (EACH INCLUDES) | ||||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8994 | [1] | UNION (STRAIGHT) | ||
| 9. | 5Q-4212 | [2] | CLIP | |
| 10. | 6V-8398 | [2] | SEAL-O-RING | |
| 11. | 6V-9168 | [2] | NUT (11/16-16-THD) | |
| 12. | 8T-4139 M | [6] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [6] | NUT (M12X1.75-THD) | |
| 15. | 8T-7930 M | [2] | BOLT (M12X1.75X160-MM) | |
| 16. | 179-5030 J | [6] | CLIP | |
| 17. | 187-9862 J | [1] | PLATE | |
| 18. | 7X-3335 CJM | [2] | BOLT (M12X1.75X240-MM) | |
| 19. | 4I-9523 | [2] | BAND-MARKER (BLUE, L3) | |
| 20. | 133-5813 | [2] | BAND-MARKER (GRAY, P) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | WHEN USED WITH AUXILIARY HYDRAULIC LINES GP(MEDIUM PRESSURE) | |||
| M | METRIC PART | |||
