COOLING SYSTEM
FAN GPLINES GP-COOLING
PUMP GP-WATER
RADIATOR GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPCOOLING SYSTEM
FAN GP
#SEBP75850060
416-0664: FAN GP-SUCTION
416-0664 FAN GP-SUCTION -DIRECT DRIVE
S/N STN1-UP; RDZ1-UP
PART OF 431-9792 FAN AR-SUCTION
S/N STN1-UP; RDZ1-UP
PART OF 431-9792 FAN AR-SUCTION
For full view, you need register
Parts for your 320D2 EXCAVATOR:
#SEBP75850061
394-2220: LINES GP-COOLING
394-2220 LINES GP-COOLING
S/N STN1-UP; RDZ1-UP
PART OF 455-4086, 518-6816 INSTALLATION AR-ENGINE
S/N STN1-UP; RDZ1-UP
PART OF 455-4086, 518-6816 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 369-2259 | [1] | HOSE (AFTERCOOLER, HIGH TEMPERATURE) | |
| 2. | 369-2263 | [1] | HOSE (AFTERCOOLER, HIGH TEMPERATURE) | |
| 3. | 369-2264 | [1] | HOSE (AFTERCOOLER, LOW TEMPERATURE) | |
| 4. | 369-2265 | [1] | PIPE AS | |
| 4A. | 7T-1099 | [1] | LINK | |
| 4B. | 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | |
| 5. | 394-2229 | [1] | HOSE (AFTERCOOLER, LOW TEMPERATURE) | |
| 6. | 415-8537 | [1] | PIPE AS | |
| 7. | 144-0367 | [6] | CLAMP-HOSE | |
| 8. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 9. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 8T-4200 M | [8] | BOLT (M8X1.25X16-MM) | |
| 11. | 8T-4985 | [1] | CLAMP-HOSE | |
| 12. | 8T-6703 | [1] | CLAMP-HOSE | |
| M | METRIC PART | |||
#SEBP75850062
346-0411: PUMP GP-WATER
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-8129 M | [2] | BOLT (M8X1.25X75-MM) | |
| 2. | 123-2899 M | [2] | BOLT (M10X1.5X40-MM) | |
| 4. | 277-2925 | [1] | CONNECTION AS | |
| 225-7738 | [1] | SEAL-O-RING | ||
| 277-2923 | [1] | GASKET | ||
| 5. | 281-8744 | [1] | GASKET-WATER REGULATOR | |
| 6. | 354-4754 | [1] | PUMP GP-WATER | |
| (KIT INCLUDES GASKET & PUMP GP) | ||||
| 7. | 417-7782 | [1] | REGULATOR AS-WATER TEMPERATURE (INCLUDES CONNECTOR) | |
| 8. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 9. | 6I-0254 M | [2] | BOLT (M8X1.25X30-MM) | |
| 10. | 6I-0839 M | [5] | BOLT (M8X1.25X70-MM) | |
| 11. | 225-8019 | [1] | GASKET | |
| M | METRIC PART | |||
#SEBP75850063
346-0411: PUMP GP-WATER
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-8129 M | [2] | BOLT (M8X1.25X75-MM) | |
| 2. | 123-2899 M | [2] | BOLT (M10X1.5X40-MM) | |
| 3. | 225-8019 | [1] | GASKET | |
| 4. | 277-2925 | [1] | CONNECTION AS | |
| 225-7738 | [1] | SEAL-O-RING | ||
| 277-2923 | [1] | GASKET | ||
| 5. | 281-8744 | [1] | GASKET-WATER REGULATOR | |
| 6. | 485-4894 CJ | [1] | PUMP GP-WATER | |
| 278-3242 | [3] | BOLT-FLANGE HEAD (M8X1.25X18-MM) | ||
| 374-4419 | [1] | GASKET | ||
| 7. | 417-7782 | [1] | REGULATOR AS-WATER TEMPERATURE (INCLUDES CONNECTOR) | |
| 8. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 9. | 6I-0254 M | [2] | BOLT (M8X1.25X30-MM) | |
| 10. | 6I-0839 M | [5] | BOLT (M8X1.25X70-MM) | |
| 485-4895 BFJ | [1] | PUMP GP-WATER | ||
| (INCLUDES PUMP GP, BOLTS & GASKET) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| J | PARTS MARKED J SERVICE PARTS MARKED J | |||
| M | METRIC PART | |||
#SEBP75850064
394-2224: RADIATOR & HYD OIL COOLER GP
394-2224 RADIATOR & HYD OIL COOLER GP
S/N STN1-UP; RDZ1-UP
PART OF 455-4086, 518-6816 INSTALLATION AR-ENGINE
S/N STN1-UP; RDZ1-UP
PART OF 455-4086, 518-6816 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 096-4035 | [1] | CLIP | |
| 2. | 171-9077 | [1] | BAND | |
| 3. | 305-7664 | [1] | BRACKET AS | |
| 4. | 245-9191 | [1] | PLATE AS | |
| 5. | 096-5819 | [1] | TANK AS-COOLANT (RECOVERY) | |
| 171-3369 | [1] | CAP AS (COOLANT RECOVERY) | ||
| 7. | 417-9090 | [1] | GUARD AS | |
| 8. | 423-4409 | [1] | HOSE-RADIATOR (LOWER) | |
| 13. | 453-0608 CY | [1] | RADIATOR & HYD OIL COOLER GP | |
| 14. | 394-2235 | [1] | HOSE-RADIATOR (UPPER) | |
| 15. | 399-7534 | [1] | LINER | |
| 17. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 18. | 3P-9847 | [1] | CLIP | |
| 19. | 3S-2093 | [5] | STRAP-CABLE | |
| 23. | 7I-2673 | [1] | STRAP-CABLE | |
| 24. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 26. | 453-2838 M | [4] | BOLT (M16X2X70-MM) | |
| 27. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 28. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 30. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 32. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 33. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 8T-6703 | [4] | CLAMP-HOSE | |
| 37. | 7Y-1976 E | HOSE-WATER (38-CM) | ||
| 38. | 5P-9909 D | SEAL (0.2-M) | ||
| 39. | 5P-5649 D | SEAL-BULK (0.9-M) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75850065
453-0608: RADIATOR & HYD OIL COOLER GP
453-0608 RADIATOR & HYD OIL COOLER GP
S/N STN1-UP; RDZ1-UP
PART OF 394-2224 RADIATOR & HYD OIL COOLER GP
S/N STN1-UP; RDZ1-UP
PART OF 394-2224 RADIATOR & HYD OIL COOLER GP
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 377-5000 | [2] | SEAL | |
| 2. | 377-5001 | [4] | SEAL | |
| 3. | 377-5002 | [1] | SEAL | |
| 4. | 377-5003 | [2] | SEAL | |
| 5. | 5D-8159 | [4] | PIN AS | |
| 6. | 096-4035 | [3] | CLIP | |
| 7. | 481-3475 | [1] | CORE AS-OIL COOLER (HYDRAULIC) | |
| 8. | 313-3762 | [2] | CUSHION-RUBBER | |
| 9. | 313-3763 | [1] | SCREEN AS (RADIATOR) | |
| 10. | 313-3764 | [1] | SCREEN AS (OIL COOLER) | |
| 11. | 313-3766 | [2] | SLEEVE | |
| 12. | 313-3769 | [2] | CUSHION-RUBBER | |
| 13. | 314-6506 | [2] | CUSHION-RUBBER | |
| 14. | 314-6509 | [2] | WASHER (11X34X3-MM THK) | |
| 15. | 314-6510 | [2] | PIN | |
| 16. | 336-4591 | [1] | BRACKET AS | |
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 17. | 352-7775 | [2] | SEAL | |
| 18. | 374-5000 | [1] | PLATE AS | |
| 19. | 375-2985 | [1] | PLATE AS | |
| 20. | 377-5004 | [1] | SEAL | |
| 21. | 377-5005 | [2] | SEAL | |
| 22. | 377-5006 | [2] | SEAL | |
| 23. | 378-6177 | [1] | FRAME AS | |
| 24. | 453-0619 | [1] | CORE AS-AFTERCOOLER | |
| 25. | 468-3838 | [1] | SHROUD AS | |
| 26. | 391-1497 | [1] | CORE AS-RADIATOR | |
| 332-4192 | [2] | SEAL-O-RING | ||
| 355-0468 | [1] | PLUG-DRAIN (RADIATOR) | ||
| 27. | 391-1498 | [1] | PLATE AS | |
| 28. | 416-0965 | [1] | CAP-RADIATOR | |
| 29. | 433-5158 | [1] | SEAL-AIR | |
| 30. | 433-5159 | [1] | SEAL-AIR | |
| 31. | 154-9023 | [1] | VALVE-SAMPLING | |
| 32. | 157-0670 | [1] | CAP-DUST | |
| 33. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 34. | 6V-9027 | [1] | SEAL-O-RING | |
| 35. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 36. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 38. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 39. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 40. | 8T-4189 M | [16] | BOLT (M8X1.25X20-MM) | |
| 41. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 42. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 43. | 7Y-1976 E | HOSE-WATER (190-CM) | ||
| 43A. | 7Y-1976 E | HOSE-WATER (8-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP75850066
109-9313: AIR CLEANER & MOUNTING GP
109-9313 AIR CLEANER & MOUNTING GP
S/N STN10001-UP; RDZ10001-UP
PART OF 518-6816 INSTALLATION AR-ENGINE
S/N STN10001-UP; RDZ10001-UP
PART OF 518-6816 INSTALLATION AR-ENGINE
For full view, you need register
#SEBP75850067
450-5325: AIR CLEANER & MOUNTING GP
450-5325 AIR CLEANER & MOUNTING GP
S/N STN1-10000; RDZ1-10000
PART OF 455-4086 INSTALLATION AR-ENGINE
S/N STN1-10000; RDZ1-10000
PART OF 455-4086 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 476-6964 | [1] | CAP AS-RAIN | |
| 2. | 276-4836 | [1] | SWITCH-PRESSURE (AIR CLEANER) | |
| 3. | 447-0758 Y | [1] | AIR CLEANER GP | |
| 4. | 452-4201 | [1] | PIPE AS | |
| 5. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 7. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP75850068
518-8172: AIR CLEANER AR
518-8172 AIR CLEANER AR
S/N RDZ1-UP
S/N RDZ1-UP
For full view, you need register
#SEBP75850069
272-4773: AIR CLEANER GP
For full view, you need register
Parts for your 320D2 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4987 | [1] | CLAMP-HOSE | |
| 2. | 116-2659 | [1] | DAMPER | |
| 3. | 130-3280 | [1] | PRECLEANER AS | |
| 174-5415 | [1] | CLAMP | ||
| 4. | 134-7089 | [1] | CLAMP | |
| 5. | 239-6395 | [1] | TUBE AS | |
| 6. | 310-9676 CY | [1] | AIR CLEANER GP | |
| 7. | 279-7909 | [1] | HOSE-AIR | |
| 8. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 9. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
COOLING SYSTEM
FAN GP
Disassembly and Assembly
