AIR INLET AND EXHAUST SYSTEM
LINES GP-AIRMANIFOLD GP-EXHAUST
MANIFOLD GP-INLET
MUFFLER GP
FUEL SYSTEM
CONTROL GP-GOVERNORFILTER GP-FUEL
TANK GP-FUEL
GOVERNOR GP
LINES GP-FUEL
AIR INLET AND EXHAUST SYSTEM
LINES GP-AIR
#SEBP76250040
471-5603: LINES GP-AIR
471-5603 LINES GP-AIR
S/N WE2224-UP
PART OF 471-5653 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
S/N WE2224-UP
PART OF 471-5653 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1393 | [3] | CLAMP-HOSE | |
| 2. | 322-2341 | [2] | CLAMP-HOSE | |
| 3. | 471-5608 | [1] | HOSE-AIR | |
| 4. | 477-4236 C | [1] | HOSE | |
| 5. | 471-5610 | [1] | BRACKET AS | |
| 6. | 471-5612 | [1] | BRACKET AS | |
| (EACH BRACKET AS INCLUDES) | ||||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 089-7338 | [1] | SLEEVE | ||
| 7. | 471-5614 | [1] | PIPE AS | |
| 8. | 471-5615 | [1] | HOSE-AIR | |
| 9. | 7X-0458 | [1] | CLIP | |
| 10. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP76250041
383-0151: MANIFOLD GP-EXHAUST
383-0151 MANIFOLD GP-EXHAUST
PART OF 457-1444 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PART OF 457-1444 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
#SEBP76250042
383-0152: MANIFOLD GP-INLET
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP76250043
455-7559: MUFFLER GP
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-4961 | [1] | CLAMP-HOSE | |
| 2. | 7Y-1650 | [1] | CLAMP-HOSE | |
| 3. | 171-0689 | [1] | CLAMP AS-EXHAUST | |
| 4. | 378-1268 | [1] | TUBE AS | |
| 5. | 455-7560 | [1] | MUFFLER AS | |
| 6. | 455-7565 | [1] | INSULATOR | |
| 7. | 458-6913 | [1] | TUBE AS | |
| 8. | 127-4839 M | [2] | BOLT (M10X1.25X25-MM) | |
| 9. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 10. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
| 11. | 8M-2773 | [1] | CLIP (LOOP) | |
| 12. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 13. | 423-1982 G | HOSE (20.9-IN) | ||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP76250044
431-4517: CONTROL GP-GOVERNOR
431-4517 CONTROL GP-GOVERNOR
S/N WE21-4425
PART OF 471-5651 CHASSIS AR
ALSO AN ATTACHMENT
S/N WE21-4425
PART OF 471-5651 CHASSIS AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 7Y-9390 | [1] | KNOB | ||
| 3. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 4. | 525-4479 | [1] | MOTOR AS-GOVERNOR (12-VOLT) | |
| 5. | 389-0762 | [1] | CONTROL AS (GOVERNOR) | |
| 6. | 471-5673 | [1] | BRACKET AS | |
| 7. | 451-5101 | [1] | BRACKET AS | |
| 8. | 453-9341 | [1] | SWITCH AS-ROCKER (POWER MODE) | |
| 111-7899 | [1] | GASKET | ||
| 9. | 352-3964 | [1] | CLIP (LADDER) | |
| 10. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 11. | 6V-8225 M | [1] | NUT (M6X1-THD) | |
| 12. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 13. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 16. | 9X-2038 | [1] | WASHER (7X19X2-MM THK) | |
| 17. | 7X-7877 E | STRIP-EDGE (3-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP76250045
144-9962: FILTER GP-WATER SEP & FUEL
144-9962 FILTER GP-WATER SEP & FUEL
PART OF 455-0403 LINES GP-FUEL, 554-4430 LINES GP-FUEL FILTER
AN ATTACHMENT
PART OF 455-0403 LINES GP-FUEL, 554-4430 LINES GP-FUEL FILTER
AN ATTACHMENT
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 156-1200 | [1] | FILTER ELEMENT-FUEL (WATER SEPARATOR) | |
| 2. | 149-3516 | [1] | BASE AS | |
| 3. | 118-8118 | [1] | RING-RETAINING | |
| 4. | 112-9401 | [1] | BOWL AS-WATER COLLECTION | |
| 128-8614 | [1] | KIT-SEAL (WATER SEPARATOR) | ||
| (INCLUDES SEALS FOR HEADER/ELEMENT, DRAIN VALVE, HEADER/BOWL & BOLT/BOWL) | ||||
| 5. | 118-8119 | [1] | NUT | |
| AVAILABLE REPAIR KIT(S): | ||||
| 121-4480 | [1] | KIT-WATER BASE (WATER SEPARATOR) | ||
| (INCLUDES CAP NUT, HEADER CAP, CAP SEAL, VOLUME PLUG, VENT PLUG, DUST SEAL, O-RING SEAL & RETAINING RING) | ||||
#SEBP76250046
351-2955: GAUGE GP-SIGHT
For full view, you need register
#SEBP76250047
386-6960: GOVERNOR GP
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 383-0164 | [4] | BOLT | |
| 2. | 383-0168 | [1] | BOLT | |
| 3. | 383-0189 | [2] | BOLT | |
| 4. | 383-0198 | [4] | NUT-FLANGE | |
| 5. | 383-0209 | [1] | GASKET | |
| 6. | 383-0278 | [4] | STUD | |
| 7. | 383-0308 | [2] | GASKET | |
| 8. | 383-0317 | [1] | CAP | |
| 9. | 383-0406 | [1] | BOLT AS | |
| 11. | 383-0416 | [2] | GASKET | |
| 12. | 383-0429 | [1] | SPRING-GOVERNOR | |
| 13. | 383-0484 | [1] | SPRING-GOVERNOR | |
| 14. | 383-0512 | [1] | LEVER GP-CONTROL (SPEED) | |
| 14A. | 383-0223 | [1] | PIN-SPRING | |
| 14B. | 383-0355 | [1] | SEAL-OIL | |
| 14C. | 383-0407 | [1] | LEVER AS-GOVERNOR | |
| 14D. | 383-0418 | [1] | SPRING-RETURN | |
| 14E. | 383-0513 | [1] | LEVER-CONTROL | |
| 15. | 383-0521 | [1] | SWITCH AS (ENGINE SHUTOFF) | |
| 15A. | 383-0211 | [1] | SEAL-O-RING | |
| 15B. | 383-0520 | [1] | BOLT-ADJUSTMENT | |
| 15C. | 383-0575 | [1] | NUT-SELF LOCKING | |
| 16. | 383-0571 | [1] | CAP | |
| 17. | 383-0583 | [1] | LEVER GP-GOVERNOR CONTROL | |
| 17A. | 383-0222 | [1] | PIN-SPRING | |
| 17B. | 383-0418 | [1] | SPRING-RETURN | |
| 17C. | 383-0584 | [1] | LEVER AS-STOP | |
| 17D. | 383-0585 | [1] | LEVER-STOP | |
| 17E. | 383-0586 | [2] | SEAL | |
| 18. | 386-6957 | [1] | LEVER AS-FORK | |
| 18A. | 383-0206 | [1] | LOCKWASHER | |
| 18B. | 383-0276 | [1] | HOLDER | |
| 18C. | 383-0277 | [1] | BOLT | |
| 18D. | 383-0409 | [1] | LEVER |
#SEBP76250048
383-0147: LINES GP-FUEL
For full view, you need register
#SEBP76250049
455-0403: LINES GP-FUEL
For full view, you need register
Parts for your 305.5E2 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [4] | CLAMP-HOSE | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 7K-1181 | [3] | STRAP-CABLE | |
| 4. | 096-1366 | [8] | CLAMP-HOSE | |
| 5. | 096-6079 B | [2] | TAPE (WHITE) | |
| 6. | 119-9868 M | [1] | BOLT (M10X1.25X20-MM) | |
| 7. | 255-4560 | [1] | VALVE AS-SHUTOFF (FUEL) | |
| 8. | 144-9962 CY | [1] | FILTER GP-WATER SEP & FUEL (PRIMARY FUEL FILTER) | |
| 9. | 370-4008 | [1] | PUMP AS-FUEL | |
| 10. | 379-0633 | [1] | ADAPTER-STRAIGHT | |
| 11. | 425-2904 | [1] | BRACKET AS | |
| 12. | 438-2578 | [1] | BRACKET AS | |
| 13. | 033-8248 | [1] | CLIP (LOOP) | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 246-2622 C | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 214-7567 | [1] | SEAL-O-RING | ||
| 16. | 148-8405 C | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 1J-9671 | [1] | SEAL-O-RING | ||
| 3K-8460 | [1] | PLUG (1/2-20-THD) | ||
| 18. | 305-0660 | [1] | SPACER (10.5X15X15-MM THK) | |
| 19. | 5K-8451 | [2] | CLIP (LOOP) | |
| 20. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 21. | 6D-3479 | [2] | CLIP (LOOP) | |
| 22. | 6K-8178 | [1] | CLIP (LOOP) | |
| 23. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 24. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 26. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 27. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 28. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 29. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 31. | 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | |
| 32. | 7I-7439 E | GUARD-HOSE (30-CM) | ||
| 32A. | 7I-7439 E | GUARD-HOSE (94-CM) | ||
| 32B. | 7I-7439 E | GUARD-HOSE (68-CM) | ||
| 33. | 8C-6959 CE | HOSE (65-CM) | ||
| 34. | 263-0768 E | HOSE (32-CM) | ||
| 35. | 423-1981 G | HOSE (44-INCH) | ||
| 35A. | 423-1981 G | HOSE (60.6-INCH) | ||
| 35B. | 423-1981 G | HOSE (101.2-INCH) | ||
| 35C. | 423-1981 G | HOSE (32.6-INCH) | ||
| 35D. | 423-1981 G | HOSE (14.5-INCH) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
AIR INLET AND EXHAUST SYSTEM
LINES GP-AIR
Specifications
