455-5632 HYDRAULIC AR S/N PFE1-UP PART OF 471-6682 GENERAL AR 320D2 GC EXCAVATOR

Part No	Qty	Parts name
239-1699 Y	[1]	LINES GP-BOOM CYLINDER
455-5634 Y	[1]	LINES GP-CONTROL
239-1714 Y	[1]	LINES GP-FRONT
376-6321 Y	[1]	LINES GP-HYDRAULIC OIL COOLER
248-9825 Y	[1]	LINES GP-PILOT (JOYSTICK, PEDALS)
376-6309 Y	[1]	LINES GP-PILOT (MAIN CONTROL VALVE)
455-5635 Y	[1]	LINES GP-PILOT (CONTROL VALVE)
455-5636 Y	[1]	LINES GP-PILOT (FILTER, PILOT PUMP)
455-5637 Y	[1]	LINES GP-PUMP
239-1716 Y	[1]	LINES GP-TRAVEL MOTOR
260-7868 Y	[1]	MOUNTING GP-MAIN CONTROL VALVE
455-5638 Y	[1]	PUMP & MTG GP-MAIN HYDRAULIC
455-5639 Y	[1]	TANK & MTG GP-HYDRAULIC
259-7464 Y	[1]	VALVE GP-MAIN CONTROL
Y		SEPARATE ILLUSTRATION

#SEBP77020271

234-6613: LEVER GP-CONTROL

LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N PFE1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR

i02489984 SEBP7702

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	4I-3038	[2]	WASHER (3.3X8X0.5-MM THK)
3.	111-4799	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5998 D		TUBE (0.3-M)
4.	185-8286 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
5.	234-6615	[1]	KNOB
6.	087-4683	[2]	LOCKWASHER
7.	120-9027 M	[2]	SCREW-PAN HEAD (M3X0.5X16-MM)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP77020272

242-6475: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

242-6475 LINES GP-AUXILIARY HYDRAULIC -BOOM, HIGH PRESSURE
S/N PFE1-UP
PART OF 486-5574, 507-8085, 512-1033 DISTRIBUTION AR

i02793141 SEBP7702

2426475 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	124-1107	[1]	GROMMET
2.	129-5874	[1]	GROMMET
3.	138-5708	[2]	CLIP-HALF
4.	153-8798	[2]	PLATE
5.	173-7916	[6]	CLAMP-HALF
6.	173-7995	[1]	PLATE
7.	193-6606	[2]	PLATE
8.	202-7127	[1]	PLATE
9.	202-7128	[2]	PLATE
10.	216-6589 I	[1]	HOSE AS
11.	306-1611 J	[1]	TUBE GP
11A.	306-1614 L	[1]	TUBE AS
11B.	306-1615 L	[1]	TUBE AS
11C.	1P-3705 L	[1]	SEAL-RECTANGULAR
11D.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
12.	247-9030 J	[1]	TUBE GP
12A.	247-9033 L	[1]	TUBE AS
12B.	247-9034 L	[1]	TUBE AS
12C.	1P-3703 L	[1]	SEAL-RECTANGULAR
12D.	8T-4139 LM	[4]	BOLT (M12X1.75X30-MM)
13.	277-0786	[1]	SUPPORT AS
14.	288-7502 I	[1]	HOSE AS
15.	124-1108	[2]	CLIP
16.	1P-3703	[2]	SEAL-RECTANGULAR
17.	1P-3704	[2]	SEAL-RECTANGULAR
18.	1P-5767	[4]	FLANGE-HALF
19.	6V-0400	[4]	FLANGE-HALF
20.	7X-2549 M	[4]	BOLT (M12X1.75X100-MM)
21.	453-1259 M	[2]	BOLT (M16X2X40-MM)
22.	7Y-4538	[6]	CLAMP-HALF
23.	8T-4139 M	[10]	BOLT (M12X1.75X30-MM)
24.	8T-4184 M	[14]	BOLT (M12X1.75X45-MM)
25.	8T-4194 M	[10]	BOLT (M12X1.75X50-MM)
26.	8T-4223	[42]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-4648 M	[4]	BOLT (M12X1.75X70-MM)
28.	451-2175	[2]	WASHER-HARD (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN)
	L		PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN
	M		METRIC PART

#SEBP77020273

242-6487: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

242-6487 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N PFE1-UP
FOR USE WITH 2.92-M (9.6-FT) STICK

i05013747 SEBP7702

2426487 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-8510 I	[1]	HOSE AS
2.	173-7916	[4]	CLAMP-HALF
3.	253-6445 I	[1]	HOSE AS
4.	253-6453	[1]	TUBE AS
5.	253-6454	[1]	TUBE AS
6.	389-2407 CY	[2]	VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW)
7.	1P-3703	[3]	SEAL-RECTANGULAR
8.	1P-3704	[3]	SEAL-RECTANGULAR
9.	1P-5767	[4]	FLANGE-HALF
10.	6V-0400	[4]	FLANGE-HALF
11.	7Y-4538	[4]	CLAMP-HALF
12.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
15.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
16.	8T-4194 M	[8]	BOLT (M12X1.75X50-MM)
17.	8T-4223	[24]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
19.	8T-6685 M	[4]	BOLT (M10X1.5X110-MM)
20.	135-4063 J	[2]	FLANGE
21.	1P-3704 J	[2]	SEAL-RECTANGULAR
22.	8T-4956 JM	[8]	BOLT (M12X1.75X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FOR JAPANESE MARKET ONLY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP77020274

260-8010: LINES GP-BOOM

LINES GP-BOOM

260-8010 LINES GP-BOOM
S/N PFE1-UP
PART OF 415-1399 BOOM AR-1 PIECE LONG

i02793992 SEBP7702

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1674	[6]	CLIP
2.	4I-1676	[6]	CLIP
3.	7Y-4868	[8]	CLIP
4.	307-5034	[1]	TUBE AS
5.	202-3855	[1]	TUBE AS
6.	202-3856	[1]	TUBE AS
7.	202-3857	[1]	TUBE AS
8.	202-3858	[1]	TUBE AS
9.	202-6996 I	[1]	HOSE AS
10.	260-8315	[1]	TUBE AS
11.	260-8316 I	[1]	HOSE AS
12.	1P-3703	[2]	SEAL-RECTANGULAR
13.	6V-0400	[4]	FLANGE-HALF
14.	6V-9746	[9]	SEAL-O-RING
15.	8T-4139 M	[20]	BOLT (M12X1.75X30-MM)
16.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
17.	8T-4223	[28]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP77020275

239-1699: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

239-1699 LINES GP-BOOM CYLINDER
S/N PFE1-UP
PART OF 455-5632 HYDRAULIC AR

i03276904 SEBP7702

2391699 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)
2.	101-7398 M	[4]	BOLT-SOCKET HEAD (M10X1.5X40-MM)
3.	108-7354 I	[1]	HOSE AS
4.	124-1047 I	[4]	HOSE AS
5.	124-1062	[1]	SUPPORT AS
6.	133-5828	[1]	SUPPORT AS
7.	142-7768	[1]	TUBE AS
8.	142-7769	[1]	TUBE AS
9.	322-8716 CY	[1]	VALVE GP-SWING CUSHION (FINE SWING)
10.	164-5552	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	4I-7745	[1]	CONNECTOR
	6V-8398	[1]	SEAL-O-RING
11.	234-4492	[1]	SUPPORT
12.	307-4918	[1]	CONNECTOR AS
	5K-9090	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	307-4919	[1]	CONNECTOR
13.	101-7404 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
14.	108-7550	[1]	CLIP
15.	148-8336	[1]	CONNECTOR AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
16.	148-8353	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9001	[1]	ELBOW
17.	148-8364	[1]	ELBOW AS
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
18.	148-8367	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
19.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
20.	1P-3703	[2]	SEAL-RECTANGULAR
21.	4I-1674	[2]	CLIP
22.	5P-1076	[2]	WASHER-HARD (13.5X30X4-MM THK)
23.	6V-9746	[8]	SEAL-O-RING
24.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
26.	8T-4178 M	[6]	BOLT (M10X1.5X90-MM)
27.	8T-4182 M	[8]	BOLT (M10X1.5X45-MM)
28.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
29.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
31.	8T-4910 M	[2]	BOLT (M12X1.75X60-MM)
32.	8T-9403	[4]	FLANGE-HALF
33.	6H-3615	[1]	PLUG-PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP77020276

242-6732: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

242-6732 LINES GP-BOOM CYLINDER -LH
S/N PFE1-UP
PART OF 341-2788 CYLINDER & LINES GP-BOOM

i02793746 SEBP7702

2426732 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	247-8869	[1]	TUBE AS
2.	222-0126	[1]	TUBE AS
3.	095-1597	[2]	SEAL-O-RING
4.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
5.	137-3709	[1]	SUPPORT AS
6.	4I-3621	[1]	SUPPORT
7.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
8.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	8T-3653 M	[1]	BOLT (M14X2X80-MM)
10.	3B-4509	[1]	LOCKWASHER
11.	094-1920	[2]	CLAMP
	M		METRIC PART

#SEBP77020277

242-6737: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

242-6737 LINES GP-BOOM CYLINDER -RH
S/N PFE1-UP
PART OF 341-2789 CYLINDER & LINES GP-BOOM

i02793708 SEBP7702

2426737 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	095-1597	[2]	SEAL-O-RING
2.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
3.	222-0124	[1]	TUBE AS
4.	247-8870	[1]	TUBE AS
5.	094-1920	[2]	CLAMP
6.	8T-3653 M	[1]	BOLT (M14X2X80-MM)
7.	3B-4509	[1]	LOCKWASHER
8.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
9.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	4I-3621	[1]	SUPPORT
11.	137-3709	[1]	SUPPORT AS
	M		METRIC PART

#SEBP77020278

187-5693: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

187-5693 LINES GP-BUCKET CYLINDER
S/N PFE1-UP
PART OF 290-1785, 416-1002 STICK AR-HOE
FOR USE WITH 2.9-M (9.5-FT) STICK

i01389036 SEBP7702

1875693 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8785 I	[2]	HOSE AS
2.	5I-4174	[1]	BLOCK
3.	8T-9403	[4]	FLANGE-HALF
4.	8T-4198 M	[4]	BOLT (M10X1.5X100-MM)
5.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
6.	1P-3702	[2]	SEAL-RECTANGULAR
7.	1P-3703	[1]	SEAL-RECTANGULAR
8.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP77020279

369-9677: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

369-9677 LINES GP-BUCKET CYLINDER
S/N PFE1-UP
PART OF 341-2813 CYLINDER & LINES GP-BUCKET

i05261231 SEBP7702

3699677 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6032 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
2.	095-1597	[1]	SEAL-O-RING
3.	472-0688	[1]	TUBE AS
4.	096-4412	[1]	SUPPORT
5.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
6.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	369-9678	[1]	SUPPORT AS
8.	096-4480	[1]	CLAMP
9.	8T-4910 M	[1]	BOLT (M12X1.75X60-MM)
10.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART