1059911 SENSOR GP-LIQUID LEVEL Caterpillar parts
307B, 307C, 311B, 311C, 312B, 312B L, 313B, 315B, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B U, 320C, 321B, 322B LN, 325B, 325B L, 325C, 330B, 345B, 345B II, 345B II MH, 345B L, 365B, 36...
Rating:
Alternative (cross code) number:
CA1059911
105-9911
1059911
CA1059911
105-9911
1059911
Weight: 0.37 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1059911:
Number on catalog scheme:
10
For full view, you need register
Information:
If necessary, remove snap pin (4) from the outer tube (1) and extend or retract inner tube (2) to the desired length. Align holes and install snap pin to lock tubes at the correct length.
Illustration 7 g02735958
(3) Retainer Plate (5) Hairpin Clip (6) Lanyard
If necessary, remove hairpin clips (5) from retainer plates (3) and allow to hang from lanyards (6) .
Insert single chain link (8) into retainer plate (3), as shown. Attach hairpin clip (5) to retainer plate to lock chain sling (7) to lifting beam (10) .
Illustration 8 g02735961
(3) Retainer Plate (5) Hairpin Clip (7) Chain Sling (8) Chain Link (10) Lifting Beam Assembly
Count chain links (8) above or below the attached retainer plate (3) .
Illustration 9 g02735996
(3) Retainer Plate (5) Hairpin Clip (7) Chain Sling (8) Chain Link (10) Lifting Beam Assembly
Insert single chain link (8) into opposite retainer plate (3) at the same location on the second leg of chain sling (7). Attach hairpin clip (5) to retainer plate to lock chain sling to lifting beam (10) .
Make sure the number of chain links (8) above and below each retainer plate (3) are equal. Make sure that the angle between lifting beam assembly (10) and each leg of chain sling (7) is a minimum of 42°.
To avoid damage to the lifting beam assembly, chain sling, and related components, maintain a minimum 42° angle between each leg of the chain sling and lifting beam assembly.
Illustration 10 g02736001
(3) Retainer Plate (7) Chain Sling (8) Chain Link (10) Lifting Beam AssemblyNote: If necessary, move the lifting beam assembly up or down equally on both legs of chain sling (7) to achieve the correct angle.
Illustration 11 g02736005
(7) Chain Sling (9) Load Lever (10) Lifting Beam Assembly
If necessary, attach chain sling (7) (with lifting beam assembly (10) attached) to a suitable overhead lifting device.Note: Refer to the appropriate assembly and disassembly service manual for correct procedures for attaching and lifting the load.Note: Two chain slings (7) and lifting beam assemblies (10) can be attached to a suitable load lever (9) for four point lifting.Maintenance Section
Inspection
Inspect prior to each use for nicks, burrs, dents, cracks, bends, or worn parts. If damage is found, discontinue use until inspected and released for use by an approved inspector at the dealership.
Do not use unless load identification markings and warning films are legible.
Illustration 12 g02736017
Illustration 13 g02736019
Do not use if the outer tube (1) or inner tube (2) is bent or damaged, or if snap pin holes in tubes are worn.
Illustration 14 g02736023
Illustration 15 g02736027
Do not use if snap pin (4) is damaged or missing.
Do not use if hairpin clips (5) or lanyards (6) are damaged or missing.
Illustration 16 g02736036
Do not use if either of the retainer plates (3) are worn, bent, or damaged.
Have tool inspected annually by an approved dealership inspector.Cleaning/Lubrication
Clean the tooling using a nonsolvent based cleaner.
Lightly lubricate sliding parts as needed, for smooth operation.Storage
Store tooling indoors in a clean, dry location to prevent rust or corrosion.
Store the lifting beam assembly lying flat, or hanging from a suitable hook, to prevent falling.Tool Disposal
At
Cat SIS web machinery list:
Parts sensor Caterpillar catalog:
120H, 12H, 140H, 140M, 143H, 14H, 14M, 160H, 163H, 16H, 16M, 236B, 267B, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L...
3116, 3126, 3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12, G3306
3176B, 3176C, 3196, 3406E, 345B, 345B L, 480, 65E, 75C, 75E, 85C, 85E, 95E, C-10, C-12
312B L, 315B L, 322B L, 325B L, 330, 3304, 3304B, 3306, 3306B, 330B, 330B L, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 3456, 345B, 345B II, 345B II MH, 345B L, 3508, 3508B, 3508C, 3512, 3512B, 35...
311B, 312B, 312B L, 315B, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B U, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B,...
312C, 312C L, 314C, 315B L, 315C, 317B LN, 318B, 318C, 320C, 320C FM, 321B, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH, 365B, 385B, 5090B
311B, 312B, 315B, 315C, 317B LN, 318B, 320B, 320B L, 321B
311B, 315B, 317B LN, 318B, 320B, 320B L
305.5, 306, 307B, 307C, 311C, 320C, 320D LRR, 320D RR, 325C, 345B II
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
311C, 312C, 312C L, 314C, 315C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 312C, 312C L, 312D, 315C, 315D L, 318C, 319C, 319D, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 320D LN, 321C, 321D LCR, 322C, 322C F...
7Y3848
SENSOR-FUEL LEVEL
307, 311, 320 L, 322, 325, 325 L, 330 FM L, 330 L, 375
307, 311, 320 L, 322, 325, 325 L, 330 FM L, 330 L, 375
311, 312, 315, 317, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080
7N7412
SENSOR ASSEM.
3508
3508
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
950 GC, C7.1, D6K2, M315D 2, M317D 2
3902837
SENSOR GP-SOOT
525D, 535D, 545D, C7.1
525D, 535D, 545D, C7.1
1470387
SENSOR AS-TEMPERATURE
312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 325C, 325C FM, 330B L, 330C FM, 330C L, 330C MH, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 385B, ...
312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 325C, 325C FM, 330B L, 330C FM, 330C L, 330C MH, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 385B, ...
1282163
SENSOR-TEMPERATURE
311B, 312B, 312B L, 315B L, 318B, 320B, 320B L, 322B L, 322B LN, 325B, 325B L, 330B L, 345B II, 345B L, 365B, 365B L, 385B
311B, 312B, 312B L, 315B L, 318B, 320B, 320B L, 322B L, 322B LN, 325B, 325B L, 330B L, 345B II, 345B L, 365B, 365B L, 385B
1282162
SENSOR GP-LIGHT
311B, 312B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B L, 385B, 5110B, M325B, W330B, W345B II
311B, 312B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B L, 385B, 5110B, M325B, W330B, W345B II
312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 325C, 325C FM, 330B L, 330C FM, 330C L, 330C MH, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 385B, ...
312B L, 315B L, 320B, 322B L, 322B LN, 325B L, 330B L, 345B L
311B, 312B, 312B L, 315B, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B U, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B,...