B092169 SHAFT, AXLE Caterpillar parts
PS-110, PS-130, PS-180
Rating:
Alternative (cross code) number:
CAB092169
B09-2169
B092169
CAB092169
B09-2169
B092169
PNEUMATIC COMPACTOR,
This part in 2 request:
Show.
This information for suppliers only!
2023-07-13
2021-07-27
Number on catalog scheme:
10
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3 Start By:
Remove the gerotor motor. Refer to Disassembly and Assembly, "Gerotor Mortor (Circle Drive) - Remove". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g00993957
Bend lock (1) from nut (2). Remove nut (2), lock (1), and washer (3).
Remove O-ring seal (4). Remove nuts (5).
Illustration 2 g00929323
Remove bolts (6).
Remove three bolts (7).
Illustration 3 g00993958
Attach Tooling (A) to circle drive (8). Attach a suitable lifting device to Tooling (A). The weight of circle drive (8) is approximately 127 kg (280 lb).
Raise circle drive (8) and remove gear (9) and thrust washer (10).
Illustration 4 g00929328
Remove Duo-Cone seal (11) from circle drive (8). Remove circle drive (8).
Illustration 5 g00929332
Remove Duo-Cone seal (12) from gear (9).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3 Start By:
Remove the gerotor motor. Refer to Disassembly and Assembly, "Gerotor Mortor (Circle Drive) - Remove". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g00993957
Bend lock (1) from nut (2). Remove nut (2), lock (1), and washer (3).
Remove O-ring seal (4). Remove nuts (5).
Illustration 2 g00929323
Remove bolts (6).
Remove three bolts (7).
Illustration 3 g00993958
Attach Tooling (A) to circle drive (8). Attach a suitable lifting device to Tooling (A). The weight of circle drive (8) is approximately 127 kg (280 lb).
Raise circle drive (8) and remove gear (9) and thrust washer (10).
Illustration 4 g00929328
Remove Duo-Cone seal (11) from circle drive (8). Remove circle drive (8).
Illustration 5 g00929332
Remove Duo-Cone seal (12) from gear (9).
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
B071659
SHAFT, SINGLE
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170232
SHAFT
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170231
SHAFT, CENTER
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170227
SHAFT ASSY., OUTPUT
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170230
SHAFT, INPUT
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
63000322
SHAFT, MAIN
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E440316
SHAFT, COUNTER
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E010118
SHAFT, AXLE
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170323
SHAFT, AXLE 2
PS-180
PS-180
E010118
SHAFT, AXLE
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E440316
SHAFT, COUNTER
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
63000322
SHAFT, MAIN
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170230
SHAFT, INPUT
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
F170227
SHAFT ASSY., OUTPUT
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
56000262
SHAFT
CB-514, CS-431
CB-514, CS-431
70000272
SHAFT, & GEAR - SET
CB-514
CB-514
C141003
SHAFT
CB-514
CB-514
88407
SHAFT - CONVEYOR IDLER
WE-851B
WE-851B
88456
SHAFT - CONVEYOR DRIVE
WE-851B
WE-851B
7X9054
SHAFT, AXLE
PS-130
PS-130