AVSPARE.COM
parts catalog

SHANK AS-RIPPER 1380876 - Caterpillar


1380876 SHANK AS-RIPPER Caterpillar parts D9R, D9T
Rating:
62
Alternative (cross code) number:
CA1380876
138-0876
1380876
Caterpillar 1380876 SHANK AS-RIPPER
Weight: 1659 pounds 752 kg.

Buy SHANK AS-RIPPER 1380876 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 1380876:

TRACK-TYPE TRACTOR  D9R   D9T   Caterpillar
Number on catalog scheme: 5
  For full view, you need register

Information:

Installation Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, Thoroughly clean the exterior of the component to prevent dirt from entering the internal mechanism.
Illustration 1 g01189541
Use a suitable lifting device to position the fixed axle under the machine, as shown. The weight of the fixed axle is approximately 1134 kg (2500 lb).
Illustration 2 g00841243
Install bolts (6) and the washers that hold the fixed axle to the front loader frame. The torque for bolts (6) is 1000 125 N m (738 92 lb ft).
Install cover (5) and bolts (4) on each side of the fixed axle.
Illustration 3 g00841237
Connect hose assembly (1) to fixed axle (2).
Connect harness assembly (3).
Fill fixed axle (2) with oil. Refer to Operation and Maintenance Manual, "Refill Capacities" for the correct procedure.End By:
Install the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) - Remove and Install".
Install the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
D9R Custom Parts Manual 7TL00001-UP (MACHINE) POWERED BY 3408 Engine
D9R CUSTOM PARTS MANUAL ABK00001-UP (MACHINE)
D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine


Parts shank Caterpillar catalog:

8E5346 SHANK AS-RIPPER
D10N, D10R, D10T, D10T2, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
9F5124 SHANK
120B, 120G, 120H, 12E, 12F, 12G, 12H NA, 130G, 140B, 140G, 140H NA, 14E, 160G, 950
5A9536 SHANK
Caterpillar
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.