SHANK AS-RIPPER 4Z9314 - Caterpillar

Illustration 17 g01219153
Illustration 18 g01219300
Attach Tooling (A), Tooling (B), Tooling (C), and Tooling (D) to main hydraulic pump (17). The weight of main hydraulic pump (17) is approximately 272 kg (600 lb).
Illustration 19 g01219305
Position main hydraulic pump (17) onto the flywheel housing. Install nine of bolts (14) .
Illustration 20 g01219149
Install sheet assembly (16) .
Illustration 21 g01219144
Illustration 22 g01219147
Position muffler support assembly (13). Install bolts (15). Install the remaining bolts (14) .
Illustration 23 g01219142
Position support assembly (12) and sheet assembly (11). Install bolts (10) .
Illustration 24 g01219136
Illustration 25 g01219135
Install bolt (9). install bolt (8) .
Illustration 26 g01219133
Install support assembly (7) .
Illustration 27 g01219131
Install cover assembly (6) .
Illustration 28 g01219129
Position bracket assembly (5) and install bolts (4) .
Illustration 29 g01219124
Install sheet assemblies (3) .
Illustration 30 g01219122
Install plate assemblies (2) .
Illustration 31 g01219116
Install sheet assembly (1) .
Install the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Fill the coolant system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" and Operation and Maintenance Manual, "Capacities (Refill)" for the machine that is being serviced.End By:
Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Install the fan guard. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install".
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".