STEM AS-COLLET 6V4677 - Caterpillar

Guards For D4H Custom Skidders
1. Fabricate two pieces each of plates (1A) and (1B) using 6 mm (.25") thick mild steel. See Illustration 1.
Illustration 1. Cover plates (1) for D4H Custom Skidder.2. Fabricate two pieces each of guards (2A) and (2B) with 25 mm (1.0") thick mild steel as shown in Illustration 2.
Illustration 2. Guards (2) for D4H Custom Skidder.3. Assemble the fabricated pieces around the pivot shaft on the track roller frame with the parts listed in the chart. Position the assembly as shown in Illustration 3 and weld guards (2) to the hub at the pivot shaft bore on the track roller frame. The 9M6527 Washers are assembled over the slotted holes.
Illustration 3. Assembly and welding instructions for D4H Custom Skidder4. Paint the new parts.Guards For D5H Custom Skidders
1. Fabricate two pieces each of plates (3A) and (3B) using 6 mm (.25") thick mild steel. See Illustration 4.
Illustration 4. Cover plates (3) for D5H Custom Skidder.2. Fabricate two pieces each of guards (4A) and (4B) with 25 mm (1.0") thick mild steel as shown in Illustration 5.
Illustration 5. Guards (4) for D5H Custom Skidder.3. Assemble the fabricated pieces around the pivot shaft on the track roller frame with the parts listed in the chart. Position the assembly as shown in Illustration 6 and weld guards 94) to the hub at the pivot shaft bore on the track roller frame. The 9M6527 Washers are assembled over the slotted holes.
Illustration 6. Assembly and welding instructions for D5H Custom Skidder.4. Paint the new parts.