SUPPORT AS 2501088 - Caterpillar

Illustration 1 g00666205
The fuse panel is located at the rear of operator seat.
Fuses - Fuses protect the electrical system from damage that is caused by overloaded circuits. Change a fuse if the element separates. If the element of a new fuse separates, check the circuit and/or repair the circuit.
Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result.
If it is necessary to replace fuses frequently, an electrical problem may exist.Contact your Caterpillar dealer.
To replace a fuse, use a puller (A) that is stored in the fuse panel. One fuse of 15 Amperes, one fuse of 20 Amperes and one fuse of 10 Amperes are contained in the fuse panel as spare fuses.The following list identifies the circuits that are protected by each fuse. The amperage for each fuse is included with each circuit.
Illustration 2 g00666210
Monitor/Engine Governor (1) - 15 AmpAuxiliary Circuit (2) - 10 AmpAir Conditioner (If Equipped) (3) - 10 AmpBlower Motor (Heater/Air Conditioner) (4) - 15 AmpHorn/Engine Shut Down (5) - 20 AmpSpare (6) - 10 AmpSpare (7) - 15 AmpGlow Indicator (8) - 10 AmpSwitch Panel (9) - 10 AmpRadio (10) - 10 AmpLight/Wiper (11) - 15 AmpFront Control Back Up (If Equipped) (12) - 10 AmpFront Control (If Equipped) (13) - 10 AmpSpare (14) - 20 Amp