TANK GP-COOLANT 3380718 - Caterpillar

Illustration 1 g00399598
A single rotary light switch controls the exterior lighting of the machine. This switch is connected to a unswitched battery connection. The switch may be used if the engine start switch key is in the OFF position.
Illustration 2 g00399658
Illustration 3 g00399739
Note: Not all of the lights that are shown will appear on machines equipped with a standard cab.
Off (1) - Turn the switch fully in the counterclockwise direction in order to turn off all the exterior lights.
Parking Light (2) - Move the switch to this position in order to turn on the following lights: dash lamps, tail lamps and tail lamps for a trailer.
Running Lamps (3) - Move the switch to this position in order to turn on the following lights: headlamps, tail lamps and dash lamps. Use the hazard lights in conjunction with this position while you are roading the machine.
Front Floodlight and Rear Floodlight (4) - Move the switch to this position in order to turn on the following lights: running lamps, front floodlights, rear floodlights and work lights for a trailer.
All Lights (5) - Move the switch to this position in order to turn on all available exterior lights. Note: The switch is cumulative. This means that all previous settings are carried forward in order to be used with the new setting.Dome Light
Illustration 4 g00399901
The dome light will illuminate whenever the cab door is opened. Push the switch downward in order to turn on the light while the cab door is closed.Hazard Warning Switch
Illustration 5 g00400219
Hazard Warning Switch - Push the center of the switch in order to activate the flashing hazard lights. Pull in the outward direction on the outside portion of the switch in order to turn off the flashing hazard lights. The turn signals will operate while the flashing hazard lights are activated.
Flashing hazard lights MUST be used when traversing public roads and accesses.Hazard lights inform traffic of a slow-moving machine.Failure to activate hazard lights may result in improper identification of the machine and may cause an accident.
Turn Signals
Illustration 6 g00400220
Turn Signals - Use the turn signals in order to signal a turn or a lane change. Move the multifunction switch (6) upward in order to indicate a right turn (8). Move the multifunction switch (6) downward in order to indicate a left turn (7) . If an indicator light for a turn signal does not illuminate, check for loose connections or a failed bulb.Note: If an indicator for a turn signal is flashing, the opposite indicator will stay on.Low-High Beam Light Switch
Illustration 7 g00400221
High Beam Headlamp - Pull the multifunction switch (6) toward the operator in order to activate the high beam headlamps. Pull the multifunction switch (6) again in order to turn off the high beam headlamps. An indicator on the dash will illuminate while the high beam headlamps are activated.