1474815 THERMISTOR Caterpillar parts
311B, 312B, 312C, 312C L, 315C, 318B, 318C, 319C, 320B, 320C, 320C FM, 320C L, 322C, 325B, 325C, 330C, 330C L, 345B II, 365B, 365B L, 385B
Rating:
Alternative (cross code) number:
CA1474815
147-4815
1474815
CA1474815
147-4815
1474815
Weight: 0.02 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 1474815:
Information:
Removal Procedure
Start By:
Release the system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06292234
Remove bolts (1) and panel (2).
Illustration 2 g06292236
Disconnect hose assemblies (3).
Illustration 3 g06292237
Disconnect harness assembly (4).
Illustration 4 g06292238
Remove bolts (5) and hydraulic oil filter (6).
Illustration 5 g06292239
Remove filter housing (8) and sensor assembly (7).Installation Procedure
Install hydraulic oil filter (6) in the reverse order of removal.
Tighten sensor assembly (7) to a torque of 33 5 N.m (292 44 lb in).
Tighten filter housing (8) to a torque of 100 10 N.m (74 7 lb ft). Then loosen one fourth turn.Note: Align label on the bowl to marked area on the filter per label affixed to the housing.
Start By:
Release the system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06292234
Remove bolts (1) and panel (2).
Illustration 2 g06292236
Disconnect hose assemblies (3).
Illustration 3 g06292237
Disconnect harness assembly (4).
Illustration 4 g06292238
Remove bolts (5) and hydraulic oil filter (6).
Illustration 5 g06292239
Remove filter housing (8) and sensor assembly (7).Installation Procedure
Install hydraulic oil filter (6) in the reverse order of removal.
Tighten sensor assembly (7) to a torque of 33 5 N.m (292 44 lb in).
Tighten filter housing (8) to a torque of 100 10 N.m (74 7 lb ft). Then loosen one fourth turn.Note: Align label on the bowl to marked area on the filter per label affixed to the housing.
Cat SIS web machinery list:
Parts thermistor Caterpillar catalog:
1474852
THERMISTOR AS
311B, 312C, 312C L, 315C, 318B, 318C, 319C, 320C, 320C FM, 320C L, 322B, 322C, 325B, 325C, 330C, 330C L, 345B II, 365B, 365B L, 385B
311B, 312C, 312C L, 315C, 318B, 318C, 319C, 320C, 320C FM, 320C L, 322B, 322C, 325B, 325C, 330C, 330C L, 345B II, 365B, 365B L, 385B
2299141
THERMISTOR AS
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
1244046
THERMISTOR
308C, 308D, 311B, 314C, 314D CR, 314D LCR, 320B, 321C, 321D LCR, 325B, 325C, 328D LCR
308C, 308D, 311B, 314C, 314D CR, 314D LCR, 320B, 321C, 321D LCR, 325B, 325C, 328D LCR
1244053
THERMISTOR
311B, 312B, 320B, 320B L, 325B
311B, 312B, 320B, 320B L, 325B
0996746
THERMISTOR
307, 311B, 320 L, 320B, 325, 325 LN, 325B, 350, 375, E110B, E120B, E200B, E240C, E300B, E70B, EL240B
307, 311B, 320 L, 320B, 325, 325 LN, 325B, 350, 375, E110B, E120B, E200B, E240C, E300B, E70B, EL240B
1244047
THERMISTOR
311B, 320B, 325B
311B, 320B, 325B
1415338
THERMISTOR
G3408, G3412, G3512, G3516
G3408, G3412, G3512, G3516
2401891
THERMISTOR
ES12F
ES12F
2629927
THERMISTOR
ES12F
ES12F
2423341
THERMISTOR
ES12F, UPS 250, UPS 600G
ES12F, UPS 250, UPS 600G
2017932
THERMISTOR
3512B, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
3512B, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
0985626
THERMISTOR
RT50
RT50
3050416
THERMISTOR
308D, 314D LCR
308D, 314D LCR
2070108
THERMISTOR
308C, 314C, 321C
308C, 314C, 321C
1244046
THERMISTOR
308C, 308D, 311B, 314C, 314D CR, 314D LCR, 320B, 321C, 321D LCR, 325B, 325C, 328D LCR
308C, 308D, 311B, 314C, 314D CR, 314D LCR, 320B, 321C, 321D LCR, 325B, 325C, 328D LCR
2299141
THERMISTOR AS
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
1243931
THERMISTOR
307B, 307C, 311C, 320C
307B, 307C, 311C, 320C
1474852
THERMISTOR AS
311B, 312C, 312C L, 315C, 318B, 318C, 319C, 320C, 320C FM, 320C L, 322B, 322C, 325B, 325C, 330C, 330C L, 345B II, 365B, 365B L, 385B
311B, 312C, 312C L, 315C, 318B, 318C, 319C, 320C, 320C FM, 320C L, 322B, 322C, 325B, 325C, 330C, 330C L, 345B II, 365B, 365B L, 385B