9N4353 TIP-ABRASION Caterpillar parts
320B, 320C, 320D, 320D LRR, 320D RR, 321D LCR, 322, 322B L, 322C, 323D L, 325, 325 L, 325B, 325B L, 325C, 330, 330C L, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980C, 980F
Rating:
Alternative (cross code) number:
CA9N4353
9N-4353
9N4353
CA9N4353
9N-4353
9N4353
Weight: 23 pounds 10 kg.
EXCAVATOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Bucket Tooth fits Caterpillar 9N4353
Parts ASAP Replaces Caterpillar Mfg Number(s) 9N4353 || Series: J Series || Sub-Series: J350 Series || Pocket Height: 73 mm – 77 mm || Pocket Width: 82 mm – 86 mm
Parts ASAP Replaces Caterpillar Mfg Number(s) 9N4353 || Series: J Series || Sub-Series: J350 Series || Pocket Height: 73 mm – 77 mm || Pocket Width: 82 mm – 86 mm
Stevens Lake Parts One New Abrasion Tip Fits CAT, Fits Caterpillar 320C, 320D, 320D L, 320D LRR, 320D RR, 322B L Models Interchangeable with 9N4353, BUT90-0009
Stevens Lake Parts One New Aftermarket Replacement Abrasion Tip That || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
Stevens Lake Parts One New Aftermarket Replacement Abrasion Tip That || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
RAParts 9N4353 Fits CAT Fits Caterpillar Abrasion Tip 320C 320D 320D L 320D LRR 320D RR 322B L
Reliable Aftermarket Parts One New Aftermarket Replacement Abrasion Tip That Fits Caterpillar Models: 320C, 320D, 320D L, 320D || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts One New Aftermarket Replacement Abrasion Tip That Fits Caterpillar Models: 320C, 320D, 320D L, 320D || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Number on catalog scheme:
3
For full view, you need register
9N4353
Images:
Compatible equipment models: 9N4353:
Information:
Illustration 1 g00955608
Note: For the correct procedure on measuring for a bent crankshaft, refer to the Guideline for Reusable Parts, SEBF8054, "Procedure to Measure and Straighten Crankshafts". (1) The length of the dowel from the surface of the crankshaft ... 4.1 0.5 mm (0.16 0.02 inch) (2) The length of the dowel from the surface of the crankshaft ... 6.4 mm (0.25 inch) (3) Main bearing journal (4) Connecting rod bearing journalRefer to Specifications, "Connecting Rod Bearing Journal" and Specifications, "Main Bearing Journal" for more information about the crankshaft journals. (5) Crankshaft end play The end play for the crankshaft (new) ... 0.15 to 0.55 mm (0.007 to 0.022 inch) The maximum permissible end play with used bearings ... 0.89 mm (0.035 inch) (6) Timing gearNote: The timing mark "V" must be oriented to the front of the crankshaft when the gear is installed.Crankshaft Seals
Illustration 2 g00960341
Note: Refer to Special Instruction, SMHS8508, "Special Handling Information and Installation Instructions for Crankshaft Seal Groups That Have Hydrodynamic Grooves In the Sealing Lip" for the correct procedure on the installation of the front and the rear seals..Note: Do not separate the seal from the sleeve. If the seal is separated from the sleeve, the seal must be replaced. (1) Front crankshaft seal During installation, the seal driver should not contact the seal within the following diameter. ... 177.80 0.25 mm (7.000 0.010 inch) After installation, the face of the seal's wear sleeve should be flush with the front face of the crankshaft with the following tolerance. ... -0.13 to 0.13 mm (-0.005 to 0.005 inch) After installation, the front face of the seal's casing should be within the following dimension from the front face of the crankshaft. ... 5.28 + 0.00 - 0.60 mm (0.208 + 0.000 - 0.024 inch) After installation, the face of the seal's casing must be parallel with the front face of the crankshaft within the following tolerance. ... 0.13 mm ( 0.005 inch) (2) Rear crankshaft seal During installation, the seal driver should not contact the seal within the following diameter. ... 177.80 0.25 mm (7.000 0.010 inch) After installation, the face of the seal's wear sleeve should be within the following dimension from the rear face of the crankshaft. ... 1.5 0.5 mm (0.06 0.02 inch) After installation, the face of the seal's casing should be within the following dimension from the rear face of the crankshaft. ... 6.4 + 0.0 - 0.6 mm (0.25 + 0.00 - 0.03 inch) After installation, the face of the seal's casing must be parallel with the rear face of the crankshaft within the following tolerance. ... 0.13 mm ( 0.005 inch)
Caterpillar parts catalog:
Parts tip Caterpillar catalog:
231D, 320, 320B, 320C, 322, 322B L, 322B LN, 322C, 324D, 325, 325 L, 325B, 325B L, 325C, 330, 330B L, 330C, 330C L, 345B II, 980G, 980G II, 980H, 980K
231D, 320, 320B, 320C, 322, 322B L, 322B LN, 322C, 325, 325B, 325B L, 325C, 330, 330 L, 330B L, 330C L, 345B II, 980G, 980G II, 980H, 980K
231D, 320C, 322, 322B L, 322C, 325, 325B, 325B L, 325C, 330, 330B L, 330C L
231D, 245D, 320, 320 L, 320B, 320C, 320D, 322B L, 322B LN, 322C, 324D, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 329D, 330, 330 L, 330B L, 330C, 330C L, 345B II, 980G, 980G II, 980H, 980K
231D, 320C, 322, 322B L, 322C, 325B, 325B L, 325C, 330, 330B L, 330C L, 345B II
325, 325 LN, 330 L, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, E240C, E300B, EL240B
320D, 320D GC, 320D L, 320D LRR, 320D RR, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
320C, 320D, 320D GC, 320D L, 320D2, 322C, 323D L, 323D2 L, 324D, 324D L, 325B L, 325C, 326D L, 329D, 329D L, 330C L
320C, 320C FM, 325B L, 325C, 330C L, 345B II
322C, 325C
322C, 330C L, 345B II, 350
323D L, 323D2 L, 324D, 325C, 325D, 326D L, 329D, 329D L, 330C, 330C L, 330D, 336D, 336D2, 340D L, 340D2 L, 345B II
988, 988B
375 L, 385B, 385C, 385C FS, 385C L, 5080, 5090B, 992C, 992D, 992G, 994, 994D, 994F
375 L, 385B, 385C, 385C FS, 385C L, 5080, 992C, 992G, 994, 994D, 994F
992C, E650
992, 992C
324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN, 330D L, 330D LN, 336D L, 336D LN, 345C, 345C L, 345D L, 345D L VG, 349E L, 349E L VG, 950H, 966H, 972H, 972K, 980H, 980K, 982M, 988H
6I8802
TIP-LONG
385B, 390D, 994, 994D, 994F
385B, 390D, 994, 994D, 994F
1366782
TIP-GENERAL PURPOSE
5130, 994, 994D, 994F
5130, 994, 994D, 994F
1043782
TIP-GENERAL PURPOSE
5130, 5130B, 5230, 994, 994D
5130, 5130B, 5230, 994, 994D
994, 994D, 994F
4T2358
TIP-ABRASION
950B/950E
950B/950E
4T2357
TIP-ABRASION
950B/950E
950B/950E