TIRE AS 2065966 - Caterpillar

Failure to follow recommended procedures for handling or transporting engines can lead to engine damage.To avoid possible engine damage, use the following procedure.
When you are lifting or moving the engine, use the following procedures in order to prevent engine damage.
Do not tilt the engine to an extreme angle unless the lubricating oil is first drained from the oil pan.
Do not turn the engine onto a side or an end surface unless the lubricating oil is first drained from the oil pan.
If the oil is not drained prior to tilting the engine or turning the engine onto a side or an end surface, the lubricating oil from the oil pan can enter the closed crankcase breather system and flow into the intake manifold and the cylinder bores. This situation could cause an hydraulic lock in the engine. Hydraulic lock can damage the engine.
The engine oil should be refilled to the correct level before the engine is started. Engine And Components
Left Front View
Illustration 1 g00620090
(1) Valve cover
(2) Water temperature regulator housing
(3) Engine oil filler cap
(4) Fuel injection nozzle
(5) Fuel filter
(6) Engine oil cooler
(7) Fan drive housing
(8) Water pump
(9) Fuel injection pump
(10) Crankshaft pulley
(11) Engine oil level gauge
(12) Engine oil filter Right Rear View
Illustration 2 g00620091
(13) Air inlet heater
(14) Alternator
(15) Wastegate
(16) Turbocharger
(17) Turbocharger oil supply
(18) Turbocharger oil return
(19) Fuel transfer pump
(20) Starter motor
(21) Oil pan
(22) Flywheel
(23) Flywheel housing Engine Serial Numbers
Type 1 Engines and 9RM Engines
Note: For a complete description of Type 1 and Type 2 engines, refer to the Systems Operation, Testing and Adjusting Module, "Engine Design" for more information.
Illustration 3 g00296495
Engine serial number location for Type 1 engines and 9RM engines
(1) Engine Serial Number Plate The engine serial number is located on the left side of the cylinder block.Type 2 Engines and 7BJ Engines
Note: For a complete description of Type 1 and Type 2 engines, refer to the Systems Operation, Testing and Adjusting Module, "Engine Design" for more information.
Illustration 4 g00296496
Engine serial number location for Type 2 engines and 7BJ engines
(1) Engine Serial Number Plate The engine serial number is located on the left side of the cylinder block.