AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8M9907 TURBOCHARGER ASSEMBLY--Type 2 Serial No. 71B1 to 71B253 inclusive Only separate parts serviced. When complete Assembly is required order 3S4445 G342C


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
GOVERNOR GP

GAS ENGINE G342C GAS ENGINE 71B
 G342 ENGINE 71B00001-UP UE034746 G342C 71B   (1969)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER ASSEMBLY
3S-4447 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
8M-9907 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
8M-9907 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
3S-4445 TURBOCHARGER ASSEMBLY
BAND AS
9M-4673 BAND AS
BAND AS
9M-4673 BAND AS
 

#UE0347460460
 

8M-9907: TURBOCHARGER ASSEMBLY

8M9907 TURBOCHARGER ASSEMBLY--Type 2
Serial No. 71B1 to 71B253 inclusive
Only separate parts serviced. When complete Assembly is required order 3S4445
c86768 UE034746
8M9907 TURBOCHARGER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-9901 [1] HOUSING  
  7M-7611 [3] RING  
  4M-6990 [1] RING  
  9M-0491 R [1] WHEEL AND SHAFT ASSEM.  
  7M-7612 [1] WASHER  
  7M-7613 [2] BEARING  
  1S-2098 [1] PLATE  
  8M-7945 [1] NOZZLE  
  7M-9917 [1] CLAMP  
  7M-9918 [1] NUT  
  8M-3264 [1] COVER  
  9M-9545 [1] SEAL  
  7M-9920 [1] PLATE (INSTRUCTION)  
  8H-3710 [2] SCREW  
  9M-9546 [5] SCREW  
  1M-0976 [5] WASHER  
  1S-0145 [2 FEET] LOCKWIRE  
  7M-9909 [1] SEAL  
  7M-9913 [1] RETAINER  
  7M-9919 [1] PLATE (LOCK)  
  7M-9910 [3] BOLT  
  9M-0496 [1] WHEEL  
  8M-7167 [1] SHIM (003" THICK)  
  8M-7168 [1] SHIM (005" THICK)  
  8M-7169 [1] SHIM (010" THICK)  
  4M-8012 [1] NUT  
  7M-9908 [1] SLEEVE  
  4M-8013 [4] RING  
  7M-9923 [1] SPACER  
  7M-9907 [2] RING  
  7M-9915 [1] RETAINER  
  7M-9922 [1] BEARING  
  7M-9914 [1] DEFLECTOR  
  7M-9911 [1] PLATE  
  9M-9547 [1] HOUSING  
  7M-9916 [1] CLAMP  
  7M-9918 [1] NUT  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0347460461
 

3S-4445: TURBOCHARGER ASSEMBLY

3S4445 TURBOCHARGER ASSEMBLY
Serial No. 71B1 to 71B253 inclusive
c96641 UE034746
3S4445 TURBOCHARGER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-2374 RH [1] HOUSING (Turbine)  
2. 7M-9917 H [1] CLAMP  
3. 7M-9918 H [2] NUT  
  3S-5854 [1] BEARING GROUP  
4. [1] BEARING (Grooved)  
5. [1] BEARING (Plain)  
6. 7M-9907 [2] RING  
7. 8H-3710 H [1] SCREW  
  8H-3710 [1] SCREW  
8. 7M-9920 H [1] PLATE (Name)  
  2S-1507 [1] PLATE (Name-Cartridge)  
9. 7M-9916 H [1] CLAMP  
10. 2S-1306 [1] BEARING  
11. 3S-1427 [1] SEAL  
12. 2S-1307 [1] RING  
13. 7M-9910 [3] BOLT  
  7M-9919 [3] PLATE (Lock)  
14. 3S-3994 H [1] COVER (Compressor)  
15. 2S-1308 [1] DEFLECTOR  
16. 4M-8012 [1] NUT  
17. 9M-0496 [1] WHEEL  
18. 8M-7167 [1] SHIM (.003" Thick)  
  8M-7168 [1] SHIM (.005" Thick)  
  8M-7169 [1] SHIM (.010" Thick)  
19. 2S-1305 [1] INSERT  
20. 7M-9908 [1] SLEEVE  
21. 7M-9923 [1] SPACER  
22. 2S-1310 [1] SPACER  
23. 7M-7611 [3] RING  
24. 1S-5372 R [1] HOUSING  
25. 9M-9545 [1] SEAL  
26. 8M-7945 H [1] NOZZLE  
27. 9M-0491 R [1] WHEEL AND SHAFT ASSEM.  
28. 4M-8013 [4] RING  
29. 4M-6990 [1] RING  
30. 1S-3887 [1] SLEEVE  
31. 1S-2098 [1] PLATE  
  3S-4007 R [1] CARTRIDGE ASSEM.  
    (Consists of all Parts Except Those Marked H)
  R   REMFG PART MAY BE AVAILABLE
 

#UE0347460462
 

9M-4673: BAND AS

9M4673 TURBOCHARGER ASSEMBLY--Type 1
Serial No. 71B1 to 71B253 inclusive
Only separate parts serviced. When complete Assembly is required order 3S4444
c70606 UE034746
9M4673 BAND AS Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-9901 [1] HOUSING  
  7M-7611 [3] RING  
  4M-6990 [1] RING  
  8M-8306 [1] ROTATING ASSEM.  
  9M-0491 R [1] WHEEL AND SHAFT ASSEM.  
    (PART OF ROTATING ASSEM. 8M8306)
  7M-7612 [1] WASHER  
  7M-7613 [2] BEARING  
  7M-9912 [1] PLATE  
  8M-7948 [1] NOZZLE  
  7M-9917 [1] CLAMP  
  7M-9918 [1] NUT  
  8M-3264 [1] COVER  
  7M-9920 [1] PLATE (INSTRUCTION)  
  [2] SCREW  
  2L-0625 [5] SCREW ASSEM.  
  7M-9909 [1] SEAL  
  7M-9913 [1] RETAINER  
  7M-9919 [1] PLATE (LOCK)  
  7M-9910 [3] BOLT  
  9M-0496 [1] WHEEL  
    (PART OF ROTATING ASSEM. 8M8306)
  8M-7167 [1] SHIM (.003" THICK)  
  8M-7168 [1] SHIM (.005" THICK)  
  8M-7169 [1] SHIM (.010" THICK)  
  4M-8012 [1] NUT  
  7M-9908 [1] SLEEVE  
  4M-8013 [4] RING  
  7M-9923 [1] SPACER  
  7M-9907 [2] RING  
    (PARTS OF ROTATING ASSEM. 8M8306)
  7M-9915 [1] RETAINER  
  7M-9922 [1] BEARING  
  7M-9914 [1] DEFLECTOR  
  7M-9911 [1] PLATE  
  7M-9927 [1] HOUSING  
  7M-9916 [1] CLAMP  
  7M-9918 [1] NUT  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0347460463
 

9M-4673: BAND AS

9M4673 TURBOCHARGER ASSEMBLY--Type 2
Serial No. 71B1 to 71B253 inclusive
Only separate parts serviced. When complete Assembly is required order 3S4444
c86763 UE034746
9M4673 BAND AS Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-9901 [1] HOUSING  
  7M-7611 [3] RING  
  4M-6990 [1] RING  
  9M-0491 R [1] WHEEL AND SHAFT ASSEM.  
  7M-7612 [1] WASHER  
  7M-7613 [2] BEARING  
  1S-2098 [1] PLATE  
  8M-7948 [1] NOZZLE  
  7M-9917 [1] CLAMP  
  7M-9918 [1] NUT  
  8M-3264 [1] COVER  
  9M-9545 [1] SEAL  
  7M-9920 [1] PLATE (INSTRUCTION)  
  8H-3710 [2] SCREW  
  9M-9546 [5] SCREW  
  1M-0976 [5] WASHER  
  1S-0145 [2 FEET] LOCKWIRE  
  7M-9909 [1] SEAL  
  7M-9913 [1] RETAINER  
  7M-9919 [1] PLATE (LOCK)  
  7M-9910 [3] BOLT  
  9M-0496 [1] WHEEL  
  8M-7167 [1] SHIM (.003" THICK)  
  8M-7168 [1] SHIM (.005" THICK)  
  8M-7169 [1] SHIM (.010" THICK)  
  4M-8012 [1] NUT  
  7M-9908 [1] SLEEVE  
  4M-8013 [4] RING  
  7M-9923 [1] SPACER  
  7M-9907 [2] RING  
  7M-9915 [1] RETAINER  
  7M-9922 [1] BEARING  
  7M-9914 [1] DEFLECTOR  
  7M-9911 [1] PLATE  
  9M-9547 [1] HOUSING  
  7M-9916 [1] CLAMP  
  7M-9918 [1] NUT  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0347460464
 

3S-4444: TURBOCHARGER ASSEMBLY

3S4444 TURBOCHARGER ASSEMBLY
Serial No. 71B1 to 71B253 inclusive
c96640 UE034746
3S4444 TURBOCHARGER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-2374 RH [1] HOUSING (Turbine)  
2. 7M-9917 H [1] CLAMP  
3. 7M-9918 H [2] NUT  
  3S-5854 [1] BEARING GROUP  
4. [1] BEARING (Grooved)  
5. [1] BEARING (Plain)  
6. 7M-9907 [2] RING  
7. 8H-3710 H [1] SCREW  
  8H-3710 [1] SCREW  
8. 7M-9920 H [1] PLATE (Name)  
  2S-1507 [1] PLATE (Name Cartridge)  
9. 7M-9916 H [1] CLAMP  
10. 2S-1306 [1] BEARING  
11. 3S-1427 [1] SEAL  
12. 2S-1307 [1] RING  
13. 7M-9910 [3] BOLT  
  7M-9919 [3] PLATE (Lock)  
14. 3S-3994 H [1] COVER (Compressor)  
15. 2S-1308 [1] DEFLECTOR  
16. 4M-8012 [1] NUT  
17. 9M-0496 [1] WHEEL  
18. 8M-7167 [1] SHIM (.003" Thick)  
  8M-7168 [1] SHIM (.005" Thick)  
  8M-7169 [1] SHIM (.010" Thick)  
19. 2S-1305 [1] INSERT  
20. 7M-9908 [1] SLEEVE  
21. 7M-9923 [1] SPACER  
22. 2S-1310 [1] SPACER  
23. 7M-7611 [3] RING  
24. 1S-5372 R [1] HOUSING  
25. 9M-9545 [1] SEAL  
26. 8M-7948 H [1] NOZZLE  
27. 9M-0491 R [1] WHEEL AND SHAFT ASSEM.  
28. 4M-8013 [4] RING  
29. 4M-6990 [1] RING  
30. 1S-3887 [1] SLEEVE  
31. 1S-2098 [1] PLATE  
  3S-4007 R [1] CARTRIDGE ASSEM.  
    (Consists of all Parts Except Those Marked H)
  R   REMFG PART MAY BE AVAILABLE
 

#UE0347460465
 

4L-3700: GOVERNOR GP

4L3700 WOODWARD GOVERNOR GROUP--TYPE 1
4L3702--Page 94E
c87363 UE034746
4L3700 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-3696 [1] LEVER  
  5B-4684 [1] PIN  
  4L-3702 Y [1] GOVERNOR ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  1A-2457 [1] PIN  
  3B-4607 [1] COTTER PIN  
  8F-1559 [3] INSULATOR  
  2L-8919 [6] DISCONNECT  
  2L-1328 [1] SPRING  
  5B-9290 [2] EYELET  
  2H-3738 [1] BOLT  
  1B-4202 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  5L-9211 [1] ROD ASSEM.  
  5L-9198 [1] LEVER ASSEM.  
  5B-4685 [1] PIN  
  4L-3698 [1] STRAP  
  4B-4276 [3] WASHER  
  5F-4475 [1] BOLT  
  3B-1915 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  5L-9199 [4] STUD  
  1B-4202 [4] NUT  
  3B-4505 [4] LOCKWASHER  
  1F-4656 [1] FITTING  
  8F-8997 [1] NUT  
    (PART OF FITTING 1F4656)
  1A-2029 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  1F-4111 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  5L-9200 [1] ADAPTER  
  1F-4022 [1] GASKET  
  4L-2007 [1] GASKET  
  4L-3699 [1] TUBE  
  4L-3676 [1] GEAR (34 TEETH)  
  1B-4437 [1] NUT  
  4B-3849 [1] WASHER  
  3B-4605 [1] COTTER PIN  
  1B-8702 [1] KEY  
  4L-3677 [1] GEAR (14 TEETH)  
  6B-0924 [1] BEARING  
  5H-4286 [1] SHAFT  
  1F-4656 [1] FITTING  
  8F-8997 [1] NUT  
    (PART OF FITTING 1F4656)
  [2] CLIP  
  5H-4277 [1] GASKET  
  5H-4325 [1] BEARING  
  5H-4186 [1] HOUSING  
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  0S-1617 [2] BOLT  
  2A-5328 [2] LOCK  
  6B-7340 [1] FLANGE  
  6B-7342 [1] SHIM  
  6B-7339 [1] RETAINER  
  6B-0924 [1] BEARING  
  6B-9672 [1] PINION (13 TEETH)  
  1B-8702 [1] KEY  
  4B-3849 [1] WASHER  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
  4H-8647 [1] BUSHING  
    (PART OF COVER ASSEM. 4H7441)
  3L-4576 [1] PLATE (NAME)  
  3L-3911 [1] SWITCH  
    (NOT SHOWN)
  4H-8613 [1] GASKET  
  4H-7441 [1] COVER ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#UE0347460466
 

4L-3700: GOVERNOR GP

4L3700 WOODWARD GOVERNOR GROUP--TYPE 2
4L3702--Page 94E
c87777 UE034746
4L3700 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-3696 [1] LEVER  
  5B-4684 [1] PIN  
  4L-3702 Y [1] GOVERNOR ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  1A-2457 [1] PIN  
  3B-4607 [1] COTTER PIN  
  8F-1559 [3] INSULATOR  
  2L-8919 [6] DISCONNECT  
  2L-1328 [1] SPRING  
  5B-9290 [2] EYELET  
  2H-3738 [1] BOLT  
  1B-4202 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  5L-9211 [1] ROD ASSEM.  
  5L-9198 [1] LEVER ASSEM.  
  5B-4685 [1] PIN  
  4L-3698 [1] STRAP  
  4B-4276 [3] WASHER  
  5F-4475 [1] BOLT  
  3B-1915 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  5L-9199 [4] STUD  
  1B-4202 [4] NUT  
  3B-4505 [4] LOCKWASHER  
  1F-4656 [1] FITTING  
  8F-8997 [1] NUT  
    (PART OF FITTING 1F4656)
  1A-2029 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  1F-4111 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  5L-9200 [1] ADAPTER  
  1F-4022 [1] GASKET  
  4L-2007 [1] GASKET  
  6L-4648 [1] TUBE  
  4L-3676 [1] GEAR (34 TEETH)  
  1B-4437 [1] NUT  
  4B-3849 [1] WASHER  
  3B-4605 [1] COTTER PIN  
  1B-8702 [1] KEY  
  4L-3677 [1] GEAR (14 TEETH)  
  6B-0924 [1] BEARING  
  5H-4325 [1] BEARING  
  6L-4647 [1] FITTING  
  5H-4286 [1] SHAFT  
  [2] NUT  
    (PART OF FITTING 6L4647)
  6L-4649 [1] TUBE  
  1F-4656 [1] FITTING  
  8F-8997 [1] NUT  
    (PART OF FITTING 1F4658)
  [3] CLIP  
  0S-1617 [2] BOLT  
  2A-5328 [2] LOCK  
  6B-7340 [1] FLANGE  
  6B-7342 [1] SHIM  
  6B-7339 [1] RETAINER  
  6B-0924 [1] BEARING  
  6B-9672 [1] PINION (13 TEETH)  
  1B-8702 [1] KEY  
  4B-3849 [1] WASHER  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
  4H-8647 [1] BUSHING  
    (PART OF COVER ASSEM. 4H7441)
  3L-4576 [1] PLATE (NAME)  
  3L-3911 [1] SWITCH  
    (NOT SHOWN)
  5H-4277 [1] GASKET  
  5H-4186 [1] HOUSING  
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  4H-8613 [1] GASKET  
  4H-7441 [1] COVER ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#UE0347460467
 

4L-3700: GOVERNOR GP

4L3700 WOODWARD GOVERNOR GROUP--TYPE 3
4L3702--Page 94E
c131659 UE034746
4L3700 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-3696 [1] LEVER  
  5B-4684 [1] PIN  
  4L-3702 Y [1] GOVERNOR ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  1A-2457 [1] PIN  
  3B-4607 [1] COTTER PIN  
  8F-1559 [3] INSULATOR  
  2L-8919 [6] DISCONNECT  
  8L-5063 [1] SPRING  
  5B-9290 [2] EYELET  
  2H-3738 [1] BOLT  
  1B-4202 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  6L-6678 [1] ROD  
  8L-4838 [1] LEVER  
  5B-4685 [1] PIN  
  2M-7819 [1] RING  
  4B-4276 [4] WASHER  
  5F-4475 [1] BOLT  
  3B-1915 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  5L-9199 [4] STUD  
  1B-4202 [4] NUT  
  3B-4505 [4] LOCKWASHER  
  1F-4656 [1] FITTING  
  8F-8997 [1] NUT  
    (PART OF FITTING 1F4656)
  1A-2029 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  1F-4111 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  5L-9200 [1] ADAPTER  
  1F-4022 [1] GASKET  
  6L-3528 [1] GASKET  
  6L-4648 [1] TUBE  
  9S-1350 [1] CLIP  
  1B-4437 [1] NUT  
  4B-3849 [1] WASHER  
  3B-4605 [1] COTTER PIN  
  4L-3676 [1] GEAR (34 TEETH)  
  1B-8702 [1] KEY  
  4L-3677 [1] GEAR (14 TEETH)  
  6B-0924 [1] BEARING  
  6L-4647 [1] FITTING  
  5H-4286 [1] SHAFT  
  [2] NUT  
    (PART OF FITTING 6L4647)
  5H-4325 [1] BEARING  
  0S-1617 [2] BOLT  
  3S-4160 [1] LOCK  
  6B-7340 [1] FLANGE  
  6B-7342 [1] SHIM  
  2S-2277 [1] RETAINER  
  6B-0924 [1] BEARING  
  6B-9672 [1] PINION (13 TEETH)  
  1B-8702 [1] KEY  
  4B-3849 [1] WASHER  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
  4H-8647 [1] BUSHING  
    (PART OF COVER ASSEM. 4H7441)
  3L-4576 [1] PLATE (NAME)  
  3L-3911 [1] SWITCH  
    (NOT SHOWN)
  9F-2247 [1] PLUG  
  4L-3698 [1] STRAP  
  5H-4277 [1] GASKET  
  5H-4186 [1] HOUSING  
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  4H-8613 [1] GASKET  
  4H-7441 [1] COVER ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#UE0347460468
 

4L-3700: GOVERNOR GP

4L3700 WOODWARD GOVERNOR GROUP--TYPE 4
4L3702-Page 94F, 2N6220-Page 95
c141390 UE034746
4L3700 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-3702 [1] GOVERNOR ASSEM.  
    -OR-
  2N-6220 YC [1] GOVERNOR ASSEM.  
    (SEPARATE ILLUSTRATION)
  1A-2457 [1] PIN  
  3B-4607 [1] COTTER PIN  
  8F-1559 [3] INSULATOR  
  2L-8919 [6] DISCONNECT  
  2N-4375 [1] SPRING ASSEM.  
  2N-4378 [4] WASHER  
  2H-3738 [1] BOLT  
  1B-4202 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  6L-6678 [1] ROD  
  8L-4838 [1] LEVER  
  5B-4685 [1] PIN  
  2M-7819 [1] RING  
  4B-4276 [4] WASHER  
  5F-4475 [1] BOLT  
  3B-1915 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  5L-9199 [4] STUD  
  1B-4202 [4] NUT  
  3B-4505 [4] LOCKWASHER  
  1F-4656 [1] FITTING  
  8F-8997 [1] NUT  
    (PART OF FITTING 1F4656)
  1A-2029 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  1F-4111 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  5L-9200 [1] ADAPTER  
  1F-4022 [1] GASKET  
  6L-3528 [1] GASKET  
  6L-4648 [1] TUBE  
  9S-1350 [1] CLIP  
  1B-4437 [1] NUT  
  4B-3849 [1] WASHER  
  3B-4605 [1] COTTER PIN  
  4L-3676 [1] GEAR (34 TEETH)  
  1B-8702 [1] KEY  
  4L-3677 [1] GEAR (14 TEETH)  
  6B-0924 [1] BEARING  
  6L-4647 [1] FITTING  
  5H-4286 [1] SHAFT  
  [2] NUT  
    (PART OF FITTING 6L4647)
  3L-4576 H [1] PLATE (NAME)  
  3L-3911 [1] SWITCH  
  5H-4325 [1] BEARING  
  0S-1617 [2] BOLT  
  3S-4160 [1] LOCK  
  6B-7340 [1] FLANGE  
  6B-7342 [1] SHIM  
  2S-2277 [1] RETAINER  
  6B-0924 [1] BEARING  
  6B-9672 [1] PINION (13 TEETH)  
  1B-8702 [1] KEY  
  4B-3849 [1] WASHER  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
  4H-8647 [1] BUSHING  
    (PART OF COVER ASSEM. 4H7441)
  4L-3696 [1] LEVER  
  [1] PIN  
  9F-2247 [1] PLUG  
  4L-3698 [1] STRAP  
  5H-4277 [1] GASKET  
  5H-4186 [1] HOUSING  
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  4H-8613 [1] GASKET  
  4H-7441 [1] COVER ASSEM.  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UE0347460469
 

4L-3700: GOVERNOR GP

4L3700 WOODWARD GOVERNOR GROUP--TYPE 5
1W8947--Page 95A, 8N6670--Page 98A
c321648 UE034746
4L3700 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G342C GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8947 CY [1] GOVERNOR GP  
2. 5L-9199 [4] STUD  
  1B-4202 [4] NUT  
3. 3B-4505 C [9] LOCKWASHER  
4. 6L-3528 [1] GASKET-GOVERNOR MOUNTING  
5. 9F-2247 [1] PLUG  
6. 8N-2474 C [1] GEAR-GOVERNOR DRIVE (14 TEETH)  
7. 5H-4186 [1] HOUSING-ADAPTER  
  0S-1618 [3] BOLT  
8. 5H-4325 [1] BALL BEARING  
9. 5H-4277 [1] GASKET  
10. 6B-0924 [2] BALL BEARING  
11. 5H-4286 [1] SHAFT-GOVERNOR  
12. 2S-2277 [1] RETAINER-BEARING  
13. 1B-8702 [2] KEY-WOODRUFF  
14. 6B-9672 [1] PINION-GOVERNOR DRIVE (13 TEETH)  
15. 4B-3849 [2] WASHER  
16. 4H-8613 [1] GASKET-GOVERNOR COVER  
17. 4H-7441 [1] COVER AS  
18. 4H-8647 [1] BUSHING  
19. 1B-4437 [2] NUT-SLOTTED  
  3B-4605 [2] COTTER  
20. 6B-7342 [1] SHIM  
21. 6B-7340 [1] FLANGE-RETAINER  
22. 0S-1617 [2] BOLT  
  3S-4160 [1] LOCK-NUT  
23. 6L-4647 [1] FITTING  
24. [2] NUT  
25. 6L-4648 [1] TUBE-OIL SUPPLY  
26. 9S-1350 [1] CLIP  
27. 4L-3676 [1] GEAR-GOVERNOR DRIVE (34 TEETH)  
28. 1F-4022 [1] GASKET-GOVERNOR HOUSING  
29. 1F-4111 [2] BOLT  
30. 3B-8999 C [1] FITTING  
31. 8F-8997 [1] NUT-FITTING  
32. 1A-2029 C [4] BOLT  
  3B-4506 [4] LOCKWASHER  
33. 5L-9200 [1] ADAPTER-GOVERNOR  
34. 4B-8701 C [1] BOLT  
35. 1B-7904 C [2] SPACER  
36. 2M-7819 [1] RING-RETAINING  
37. 2L-9038 C [1] LOCKNUT  
  5P-0537 C [1] WASHER  
38. 6L-6678 [1] ROD-CONTROL  
  8N-6670 CFY [1] SWITCH GP-WOODWARD GOVERNOR  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Improved Turbocharger Bearing Kit Available For Parts Service
1990/07/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Oil Strainer (Screen) Added To Turbocharger Thrust Bearing
1978/02/08
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Two Strainers are Available to Protect the Bearings in Turbochargers {1052}
2001/08/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}
Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}
2W724 Turbocharger Cartridge Repair Kit{1053}
2W724 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger<BR> (Schwitzer 4MD354)
G342 ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Oil Strainer (Screen) Added To Turbocharger Thrust Bearing{1052,1053}
1978/01/30
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved Turbocharger Bearing Kit Available For Parts Service{1053}
1990/07/23
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog G342C :

TURBOCHARGER ASSEMBLY
8M-9907 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
3S-4447 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
8M-9906 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
8M-9906 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
3S-4446 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
8M-9905 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
8M-9905 TURBOCHARGER ASSEMBLY
CARBURETOR AS
9Y-5300 CARBURETOR AS
TURBOCHARGER ASSEMBLY
3S-4445 TURBOCHARGER ASSEMBLY
BAND AS
9M-4673 BAND AS
BAND AS
9M-4673 BAND AS
TURBOCHARGER ASSEMBLY
3S-4444 TURBOCHARGER ASSEMBLY
GOVERNOR GP
4L-3700 GOVERNOR GP
GOVERNOR GP
4L-3700 GOVERNOR GP
GOVERNOR GP
4L-3700 GOVERNOR GP
GOVERNOR GP
4L-3700 GOVERNOR GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.