AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

POWER CONTROL OUTPUT SHAFT (6D3950 N/S) Serial No. 12K1969 to 12K2135 inclusive. 8D1501, 8D1563, 6D3414, 7D6842, 8D1567 and 8D1502 Joint parts are shown on Pages 95A, 95B and 106F-2 14E


HYDRAULIC SYSTEM
CONTROL GP-POWER
SHAFT GP
CONTROL GP-POWER

MOTOR GRADER 14E MOTOR GRADER 12K
 NO. 14E MOTOR GRADER / DIRECT DRIVE / 12K00001-02198 (MACHINE) UE070102 14E 12K   (1967)

HYDRAULIC SYSTEM

CONTROL GP-POWER
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
8D-0420 POWER CONTROL CONVERSION ARRANGEMENT
CLUTCH CONVERSION GROUP
8D-0430 CLUTCH CONVERSION GROUP
 

#UE0701020270
 

6D-3950: POWER CONTROL OUTPUT SHAFT

POWER CONTROL OUTPUT SHAFT (6D3950 N/S)
Serial No. 12K1969 to 12K2135 inclusive. 8D1501, 8D1563, 6D3414, 7D6842, 8D1567
and 8D1502 Joint parts are shown on Pages 95A, 95B and 106F-2
c116598 UE070102
6D3950 POWER CONTROL OUTPUT SHAFT Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-8034 [4] JOINT ASSEM.  
  7D-3799 [1] YOKE  
2. 6D-2529 [1] SPIDER AND BEARING ASSEM.  
  2D-7030 [4] SEAL  
  1H-8027 [2] RING  
3. 7D-1745 [3] SHAFT ASSEM.  
  6D-7948 [1] SHAFT  
4. 7D-1985 [1] JOINT ASSEM.  
    Includes:
  8D-1501 [1] JOINT ASSEM.  
    -OR-
  8D-1563 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
5. 7D-1746 [1] SHAFT ASSEM.  
  6D-8297 [1] SHAFT  
6. 7D-1985 [1] JOINT ASSEM.  
    Includes:
  8D-1501 [1] JOINT ASSEM.  
    -OR-
  8D-1563 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
7. 0S-1618 [9] BOLT  
  3B-4505 [9] LOCKWASHER  
8. 7D-4522 [2] SHAFT (Blade Lift)  
9. 1B-8714 [4] KEY  
10. 8D-0989 [1] BEARING ASSEM.  
11. 0S-1571 C [2] BOLT  
  3B-4506 [2] LOCKWASHER  
12. 9S-1354 [4] NUT  
  3B-4510 [4] LOCKWASHER  
13. 6D-7989 [2] BEARING ASSEM.  
14. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
15. 1B-0581 [16] BOLT  
  6D-2535 [8] STRAP  
  6D-2534 [8] PLATE  
16. 7D-1742 [1] SHAFT ASSEM.  
  5D-8106 [1] SHAFT  
17. 7D-2058 [1] JOINT ASSEM.  
    Includes:
  8D-1502 [1] JOINT ASSEM.  
    -OR-
  8D-1567 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
18. 6D-3483 [1] SHAFT (Circle Reverse)  
19. 6D-4196 [3] BEARING ASSEM.  
  5D-3546 [2] COLLAR  
  3H-7180 [2] SETSCREW  
20. 7D-4524 [2] COUPLING ASSEM.  
21. 7D-2347 [1] PIN  
22. 5D-0663 [20] SHIM  
23. 3B-8489 [3] FITTING  
24. 6D-3412 [1] SHAFT ASSEM.  
  6D-3411 [1] TUBE  
  6D-3413 [1] SLEEVE  
25. 7D-7012 C [1] JOINT ASSEM.  
    Includes:
  6D-3414 [1] JOINT ASSEM.  
    -OR-
  7D-6842 Y [1] JOINT ASSEM.  
    (Separate Illustration)
26. 1D-4717 C [2] NUT  
27. 4B-4278 C [4] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UE0701020271
 

6D-3950: POWER CONTROL OUTPUT SHAFT

POWER CONTROL OUTPUT SHAFT (6D3950 N/S)
Serial No. 12K2136-Up. 8D1501, 8D1563, 6D3414, 7D6842, 8D1567 and 8D1502
Joint parts are shown on Pages 95A, 95B and 106F-2
c142689 UE070102
6D3950 POWER CONTROL OUTPUT SHAFT Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-8034 [4] JOINT ASSEM.  
  7D-3799 [1] YOKE  
2. 6D-2529 [1] SPIDER AND BEARING ASSEM.  
  2D-7030 [4] SEAL  
  1H-8027 [2] RING  
3. 7D-1745 [3] SHAFT ASSEM.  
  6D-7948 [1] SHAFT  
4. 7D-1985 [1] JOINT ASSEM.  
    Includes:
  8D-1501 [1] JOINT ASSEM.  
    -OR-
  8D-1563 Y [1] JOINT ASSEM.  
    (Separate Illustration)
5. 7D-1746 [1] SHAFT ASSEM.  
  6D-8297 [1] SHAFT  
6. 7D-1985 [1] JOINT ASSEM.  
    Includes:
  8D-1501 [1] JOINT ASSEM.  
    -OR-
  8D-1563 Y [1] JOINT ASSEM.  
    (Separate Illustration)
7. 0S-1618 [9] BOLT  
  3B-4505 [9] LOCKWASHER  
8. 7D-4522 [2] SHAFT (Blade Lift)  
9. 1B-8714 [4] KEY  
10. 8D-0989 [1] BEARING ASSEM.  
11. 0S-1571 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
12. 9S-1354 [4] NUT  
  3B-4510 [4] LOCKWASHER  
13. 9D-1373 C [2] BEARING ASSEM.  
  9D-1372 [1] BEARING  
14. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
15. 1B-0581 [16] BOLT  
  6D-2535 [8] STRAP  
  6D-2534 [8] PLATE  
16. 7D-1742 [1] SHAFT ASSEM.  
  5D-8106 [1] SHAFT  
17. 7D-2058 [1] JOINT ASSEM.  
    Includes:
  8D-1502 [1] JOINT ASSEM.  
    -OR-
  8D-1567 Y [1] JOINT ASSEM.  
    (Separate Illustration)
18. 6D-3483 [1] SHAFT (Circle Reverse)  
19. 6D-4196 [3] BEARING ASSEM.  
  5D-3546 [2] COLLAR  
  3H-7180 [2] SETSCREW  
20. 7D-4524 [2] COUPLING ASSEM.  
21. 7D-2347 [1] PIN  
22. 5D-0663 [20] SHIM  
23. 3B-8489 [3] FITTING  
24. 6D-3412 [1] SHAFT ASSEM.  
  6D-3411 [1] TUBE  
  6D-3413 [1] SLEEVE  
25. 7D-7012 [1] JOINT ASSEM.  
    Includes:
  6D-3414 [1] JOINT ASSEM.  
    -OR-
  7D-6842 Y [1] JOINT ASSEM.  
    (Separate Illustration)
26. 1D-4717 [2] NUT  
27. 4B-4278 [4] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UE0701020272
 

8D-1501: JOINT ASSEMBLY

8D1501 JOINT ASSEMBLY
Serial No. 12K1334-Up. Part of Power Control Output Shafts shown on Pages 94D
through 95. Only separate parts serviced. When complete Assembly is required
order 7D1985
c137056 UE070102
8D1501 JOINT ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-1506 [1] YOKE (Marked USA M)  
2. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Marked USA 1675)
3. 8D-2835 [4] RING  
4. [1] YOKE (Marked USA N-2)  
 

#UE0701020273
 

8D-1563: JOINT ASSEMBLY

8D1563 JOINT ASSEMBLY
Serial No. 12K1334-Up. Part of Power Control Output Shafts shown on Pages 94D
through 95. Only separate parts serviced. When complete Assembly is required
order 7D1985
c116602 UE070102
8D1563 JOINT ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2D-3188 C [1] YOKE (Marked 10717M)  
2. 2D-2978 [1] SPIDER & BEARING ASSEM.  
    (Marked Mi5454)
3. 4D-0523 [4] RING  
4. [1] YOKE (Marked 10718M)  
  C   INDICATES CHANGE
 

#UE0701020274
 

6D-3414: JOINT ASSEMBLY

6D3414 JOINT ASSEMBLY
Serial No. 12K1969-Up. Part of Power Control Output Shafts
shown on Pages 94F and 95. Only separate parts serviced
When complete Assembly is required order 7D7012
c116600 UE070102
6D3414 JOINT ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2D-3188 [1] YOKE (Marked 10717M)  
2. 2D-2978 [1] SPIDER & BEARING ASSEM.  
    (Marked Mi5454)
3. 4D-0523 [4] RING  
4. 6D-3415 [1] YOKE (Marked 5449M)  
 

#UE0701020275
 

7D-6842: JOINT ASSEMBLY

7D6842 JOINT ASSEMBLY
Serial No. 12K1969-Up. Part of Power Control
Output Shafts shown on Pages 94F and 95
c116601 UE070102
7D6842 JOINT ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-1506 [1] YOKE (Marked USA M)  
2. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Marked USA 1675)
3. 8D-2835 [4] RING  
4. [1] YOKE (Marked USA F)  
 

#UE0701020276
 

8D-0420: POWER CONTROL CONVERSION ARRANGEMENT

8D420 POWER CONTROL CONVERSION ARRANGEMENT
Serial No. 12K1 to 12K1456 inclusive
TO CONVERT TO MULTI-DISC POWER CONTROL BOX
UE0701020276 UE070102
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8D-0430 Y [1] CLUTCH CONVERSION GROUP--L.H.  
  8D-0440 Y [1] CLUTCH CONVERSION GROUP--R.H.  
  7J-9915 Y [2] RELIEF VALVE GROUP  
  8B-4967 [4] SEAL--TO OUTPUT SHAFT  
  5D-8507 [1] GASKET--REAR COVER  
  5D-8508 [1] GASKET--FRONT COVER  
  6D-0392 [2] RETAINER--TO RETAIN LIFT ARMS  
  6D-2534 [8] LOCK--TO YOKE  
  6D-3929 [2] GASKET--LEVER HOUSING  
  6D-4585 [8] BEARING--FRONT & REAR COVER BEARINGS  
  6D-5736 [4] ADAPTER--TO SEAL HYDRAULIC DUMP CONTROL PORTS  
  6D-9081 [4] RETAINER--TO YOKE  
  7D-0088 [4] YOKE--TO OUTPUT SHAFT  
  7D-2409 [2] STOP--TO FRAME  
  7D-3565 [1] FILM--ON POWER CONTROL OIL FILL PLUG  
  8D-0448 [1] PIN--TO REPLACE SHEAR PIN  
  4F-7389 [1] SEAL--TO SEAL DEAD SHAFT TO FRONT COVER  
  4F-7391 [2] SEAL--TO SEAL PUMPS TO CASE  
  5F-1678 [2] SEAL--TO SEAL PUMPS TO CASE  
  5F-7054 [2] SEAL--TO SEAL SUCTION TUBE TO PUMP (PUMP END ONLY)  
  1H-5728 [2] SEAL--TO SEAL PUMPS TO CASE  
  2J-0157 [10] SEAL--TO SEAL SPLLO VALVES TO BRAKE HOUSING  
  3J-1907 [6] SEAL--TO PLUG  
  3J-7470 [4] SHIM--FOR RELIEF VALVE  
  3J-7473 [4] SHIM--FOR RELIEF VALVE  
  4J-5268 [4] SEAL--TO SEAL SLEEVE TO PUMP & BRAKE HOUSING  
  5J-8877 [1] ELEMENT ASSEMBLY  
  6J-1038 [4] SEAL--TO ADAPTER  
  3K-0360 [6] SEAL--TO PLUG  
  4K-1388 [4] SEAL--TO ADAPTER  
  0L-1329 [4] BOLT--TO OUTPUT SHAFT  
  2M-4453 [4] SEAL--TO SEAL BRAKE HOUSING TO MAIN HOUSING  
  9S-4185 [2] PLUG--TO SEAL HYDRAULIC PUMP OUTLET  
  9S-4185 [2] PLUG--TO SEAL HYDRAULIC PUMP TO SUMP OF LIMIT SYSTEM  
  9S-4185 [2] PLUG--TO SEAL SOLENOID PUMP OPENINGS  
  9S-4191 [4] PLUG--TO ADAPTER  
  9S-4191 [2] PLUG--TO SEAL PUMP OUTLET  
  Y   SEPARATE ILLUSTRATION
 

#UE0701020277
 

8D-0430: CLUTCH CONVERSION GROUP

8D430 CLUTCH CONVERSION GROUP--L.H. Part 1 of 2
Serial No. 12K1 to 12K1456 inclusive
Part of 8D420 Power Control Conversion Arrangement listed on Page 95D
c138181 UE070102
8D0430 CLUTCH CONVERSION GROUP Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [16] BOLT  
2. 7D-2655 [3] HOUSING ASSEM.  
  6B-6863 [1] PIN  
3. 2M-4453 [8] SEAL  
4. 7D-8213 [1] HOUSING ASSEM.  
  6B-6863 [3] PIN  
5. 6D-4584 [4] WASHER  
6. 7D-2657 [1] HOUSING  
7. 7D-2659 [4] SPRING  
8. 6D-8738 [4] RETAINER  
9. 7D-2649 [4] CLUTCH  
10. 2J-8172 [4] RING  
11. 7D-2645 [4] GEAR ASSEM. (35 & 46 Teeth)  
12. 7D-3818 [2] BEARING  
13. 1J-6474 [4] RING  
14. 7D-0848 [4] WASHER  
15. 6D-4536 [28] DISC (Inner)  
16. 6D-4535 [28] DISC (Outer)  
17. 6D-9084 [4] WASHER  
18. 6D-0469 [1] SEAL (Plastic)  
  2J-8163 [4] SEAL (Rubber)  
19. 7D-2653 [1] PISTON ASSEM.  
20. 6D-4581 [1] BEARING  
21. 6D-0473 [4] SEAL (Plastic)  
  4H-9105 [4] SEAL (Rubber)  
22. 6D-8977 [12] DISC (Inner)  
23. 5D-8526 [14] DISC (Outer)  
24. 7D-7761 [1] ADAPTER  
  3H-4987 [1] GASKET  
25. 6D-5512 [3] SEAL (Plastic)  
26. 7D-2651 [3] PISTON ASSEM.  
27. 6D-4581 [1] BEARING  
28. 7D-2644 [2] SHAFT  
  9S-8004 H [4] PLUG  
  3J-1907 H [4] SEAL  
  H   NOT SHOWN
 

#UE0701020278
 

8D-0430: CLUTCH CONVERSION GROUP

8D440 CLUTCH CONVERSION GROUP--R.H. Part 2 of 2
Serial No. 12K1 to 12K1456 inclusive
Part of 8D420 Power Control Conversion Arrangement listed on Page 95D
c138182 UE070102
8D0430 CLUTCH CONVERSION GROUP Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [16] BOLT  
2. 7D-2655 [1] HOUSING ASSEM.  
  6B-6863 [1] PIN  
3. 2M-4453 [8] SEAL  
4. 7D-8214 [1] HOUSING ASSEM.  
  6B-6863 [5] PIN  
5. 6D-4584 [4] WASHER  
6. 7D-2657 [3] HOUSING  
7. 7D-2659 [4] SPRING  
8. 6D-8738 [4] RETAINER  
9. 7D-2649 [4] CLUTCH  
10. 2J-8172 [4] RING  
11. 7D-2645 [4] GEAR ASSEM. (35 & 46 Teeth)  
12. 7D-3818 [2] BEARING  
13. 1J-6474 [4] RING  
14. 7D-0848 [4] WASHER  
15. 6D-4536 [28] DISC (Inner)  
16. 6D-4535 [28] DISC (Outer)  
17. 6D-9084 [4] WASHER  
18. 6D-0469 [3] SEAL (Plastic)  
  2J-8163 [4] SEAL (Rubber)  
19. 7D-2653 [3] PISTON ASSEM.  
20. 6D-4581 [1] BEARING  
21. 6D-0473 [4] SEAL (Plastic)  
  4H-9105 [4] SEAL (Rubber)  
22. 6D-8977 [12] DISC (Inner)  
23. 5D-8526 [14] DISC (Outer)  
24. 9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
25. 6D-5512 [1] SEAL (Platic)  
26. 7D-2651 [1] PISTON ASSEM.  
27. 6D-4581 [1] BEARING  
28. 7D-2644 [2] SHAFT  
 

#UE0701020279
 

POWER CONTROL

POWER CONTROL--As Viewed from Operator's Seat--Part 1 of 4
Serial No. 12K1 to 429 inclusive
Refer also to Pages 166 through 185 for special parts
c125876 UE070102
None POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-4453 [4] SEAL  
2. 1B-8704 [4] KEY  
3. 5D-8556 [2] LEVER  
4. 0S-1571 [4] BOLT  
5. 6D-0679 [4] KNOB  
6. 5D-8555 [2] LEVER  
7. 1B-2886 [15] BOLT  
8. 3B-4508 [21] LOCKWASHER  
9. 2S-4079 [3] PLUG ASSEM.  
10. 2S-4078 [3] SEAL  
    (1 in each 2S4079 Plug Assem.)
11. 5D-8487 [1] COVER  
12. 1D-4719 [6] NUT  
13. 6D-6197 [3] SHIM (.005" Thick)  
  6D-6198 [3] SHIM (.010" Thick)  
14. 6D-1733 [1] CONE  
15. 6D-1734 [1] CUP  
16. 6D-6185 [1] GEAR (24 Teeth)  
17. 9M-8366 [1] BOLT  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
18. 5M-7881 [1] SPRING  
19. 6D-6195 [1] CARRIER  
20. 6D-6192 [1] GEAR (28 Teeth)  
  1B-8714 [1] KEY  
21. 6D-6193 [3] SHIM (.005" Thick)  
  6D-6194 [1] SHIM (.010" Thick)  
22. 1H-8037 [1] YOKE  
23. 7H-0387 [1] NUT  
24. 2J-8333 [1] SEAL  
25. 2H-0929 [3] CUP  
26. 2H-0930 [3] CONE  
27. 6D-6196 [1] WORM  
28. 2H-6338 [1] SEAL  
29. 5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
30. 6D-6204 [1] COVER ASSEM.  
31. 2L-9315 [1] GUIDE  
    (Part of 6D6204 Cover Assem.)
32. 6D-6202 [1] GASKET  
33. 0S-1594 [17] BOLT  
34. 7H-1861 [4] LOCK  
35. 6D-6191 [1] COVER  
36. 7M-5897 [2] PLUG ASSEM.  
  2M-9780 [1] SEAL  
    (Part of 7M5897 Plug Assem.)
37. 3B-4506 [13] LOCKWASHER  
38. 6D-6182 [1] PLUNGER ASSEM.  
39. 0S-1625 [6] BOLT  
  1D-4720 [6] NUT  
  3B-4510 [6] LOCKWASHER  
40. 6D-5736 [4] ADAPTER  
  4K-1388 [4] SEAL (1.048" Inside Diameter)  
  6J-1038 [4] SEAL (.612" Inside Diameter)  
41. 4J-6554 [4] PLUG ASSEM.  
  3J-1907 [4] SEAL  
    (1 in each 4J6554 Plug Assem.)
 

Information:

Service Magazine
Different Seal For Control Shaft In Power Control Box{5201}
1980/01/28

Caterpillar Parts SIS Catalog 14E :

POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL INPUT SHAFT
POWER CONTROL INPUT SHAFT
CONTROL VALVE ASSEMBLY
4D-7850 CONTROL VALVE ASSEMBLY
RELIEF VALVE GROUP
6J-6976 RELIEF VALVE GROUP
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
JOINT ASSEMBLY
8D-1501 JOINT ASSEMBLY
JOINT ASSEMBLY
8D-1563 JOINT ASSEMBLY
JOINT ASSEMBLY
6D-3414 JOINT ASSEMBLY
JOINT ASSEMBLY
7D-6842 JOINT ASSEMBLY
8D-0420 POWER CONTROL CONVERSION ARRANGEMENT
CLUTCH CONVERSION GROUP
8D-0430 CLUTCH CONVERSION GROUP
8D-0430 CLUTCH CONVERSION GROUP

Truck sale:

Caterpillar 14E
 
Caterpillar 14E
- motor graders
NMC
Caterpillar 314E STL, Crawler Excavators, Construction
104,500 
Caterpillar 314E STL, Crawler Excavators, Construction
- Crawler Excavators
HOLT OF CALIFORNIA
Caterpillar 314E, Crawler Excavators, Construction
80,003 
Caterpillar 314E, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
128,589 
Caterpillar 314E, Crawler Excavators, Construction


 
165,000 
Caterpillar 314EL, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.