AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

POWER CONTROL (6D6180 N/S)--As Viewed from Operator's Seat--Part 1 of 4 Serial No. 13K2564 to 13K3379 inclusive & 33K373-Up Refer also to Pages 169 through 188 for special parts 12F


HYDRAULIC SYSTEM
CONTROL GP-POWER

MOTOR GRADER 12F MOTOR GRADER 13K
 NO. 12F MTR. GRADER / DIRECT DRIVE / 13K00001-05286 (MACHINE) UE070111 12F 13K   (1967)

HYDRAULIC SYSTEM

CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
 

#UE0701110290
 

6D-6180: CONTROL GP-POWER

POWER CONTROL (6D6180 N/S)--As Viewed from Operator's Seat--Part 1 of 4
Serial No. 13K2564 to 13K3379 inclusive & 33K373-Up
Refer also to Pages 169 through 188 for special parts
c128914 UE070111
6D6180 CONTROL GP-POWER Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-8704 [4] KEY  
2. 6D-6182 [1] PLUNGER ASSEM.  
3. 5D-8556 [2] LEVER  
4. 0S-1571 [4] BOLT  
5. 6D-0679 [4] KNOB  
6. 5D-8555 [2] LEVER  
7. 1B-2886 [15] BOLT  
8. 3B-4508 [21] LOCKWASHER  
9. 9S-6130 C [3] PLUG  
  2S-4078 [3] SEAL  
10. 9S-4185 C [1] PLUG  
11. 5D-8487 [1] COVER  
12. 1D-4719 [6] NUT  
13. 7D-3901 [2] SHIM (.003" Thick)  
  6D-6197 [2] SHIM (.005" Thick)  
  6D-6198 [3] SHIM (.010" Thick)  
14. 6D-1733 [1] CONE  
15. 6D-1734 [1] CUP  
16. 7D-1945 C [1] GEAR (24 Teeth)  
17. 3B-4506 [13] LOCKWASHER  
18. 0S-1012 [1] SPRING  
19. 6D-6195 [1] CARRIER  
20. 6D-6192 [1] GEAR (28 Teeth)  
  1B-8714 [1] KEY  
21. 7D-3899 [2] SHIM (.003" Thick)  
  6D-6193 [2] SHIM (.005" Thick)  
  6D-6194 [1] SHIM (.010" Thick)  
22. 1H-8037 [1] YOKE  
23. 7H-0387 [1] NUT  
24. 2J-8333 [1] SEAL  
25. 2H-0929 [3] CUP  
26. 2H-0930 [3] CONE  
27. 6D-6196 [1] WORM  
28. 2H-6338 [1] SEAL  
29. 5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
30. 6D-6204 [1] COVER ASSEM.  
31. 2L-9315 [1] GUIDE  
    (Part of 6D6204 Assem.)
32. 6D-6202 [1] GASKET  
33. 0S-1594 [17] BOLT  
34. 7H-1861 [4] LOCK  
35. 6D-6191 [1] COVER  
36. 9S-4190 C [2] PLUG  
  2M-9780 [2] SEAL  
37. 1A-6308 [1] BOLT  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
38. 0S-1625 [6] BOLT  
  1D-4720 [6] NUT  
  3B-4510 [6] LOCKWASHER  
39. 3K-0360 C [1] SEAL  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0701110291
 

6D-6180: CONTROL GP-POWER

POWER CONTROL (6D6180 N/S)--As Viewed from Front of Machine--Part 2 of 4
Serial No. 13K2564 to 13K3379 inclusive & 33K373-Up
6D8202 Pump parts are shown on Page 98A
c128915 UE070111
6D6180 CONTROL GP-POWER Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VENT ASSEM.  
2. 2H-5330 [8] BOLT  
3. 3B-4506 [18] LOCKWASHER  
4. 6D-3928 [2] HOUSING ASSEM.  
  2D-8641 [2] PIN  
    (1 in each 6D3928 Housing Assem.)
  6D-3929 [2] GASKET  
5. 1B-8704 [4] KEY  
6. 4J-3044 [4] BEARING  
7. 5D-8553 [4] LEVER  
  4D-5531 [4] BOLT  
8. 4K-4114 [4] SEAL  
9. 5D-8552 [4] SHAFT  
10. 4B-3671 [4] BEARING  
11. 1H-7339 [2] SEAL  
12. 0L-2070 [8] BOLT  
13. 4J-4742 [1] BODY ASSEM.  
  7M-8485 [1] SEAL  
14. 6D-3248 [1] BRACKET (Left Hand)  
15. 0S-1589 [4] BOLT  
  1D-4720 [4] NUT  
16. 3B-4510 [8] LOCKWASHER  
17. 0T-0102 [2] BOLT  
18. 0L-0364 [2] LOCK  
19. 0L-1351 [2] BOLT  
20. 5D-8508 [1] GASKET  
21. 2K-4472 [1] SEAL  
22. 9S-4190 C [1] PLUG  
  2M-9780 [1] SEAL  
23. 6D-4900 [1] COVER  
24. 0S-1595 [4] BOLT  
25. 3B-4508 [19] LOCKWASHER  
26. 2D-8422 [1] SPACER  
27. 5D-8539 [1] TUBE ASSEM. (Right Hand)  
  5D-8540 [1] TUBE ASSEM. (Left Hand)  
28. 5F-1678 [4] SEAL  
29. 1H-5728 [2] SEAL  
30. 6D-8202 Y [2] PUMP ASSEM.  
    (See Separate Illustration)
31. 4J-5268 [4] SEAL  
32. 5F-7054 [2] SEAL  
33. 4F-7391 [2] SEAL  
34. 6D-5769 [2] SLEEVE  
35. 6D-3247 [1] BRACKET (Right Hand)  
36. 0S-1566 [4] BOLT  
37. 2B-0947 [15] BOLT  
38. 6D-2688 [1] COVER ASSEM.  
39. 5D-8509 [4] BEARING  
    (Part of 6D2688 Assem.)
  C   INDICATES CHANGE FROM PREVIOUS
  Y   SEPARATE ILLUSTRATION
 

#UE0701110292
 

6D-6180: CONTROL GP-POWER

POWER CONTROL (6D6180 N/S)--As Viewed from Right Hand Side of Machine--Part 3 of 4
Serial No. 13K2564 to 13K3379 inclusive and 33K373-Up
c139461 UE070111
6D6180 CONTROL GP-POWER Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-8507 [1] GASKET  
2. 2M-4453 [16] SEAL  
3. 7D-0700 [1] HOUSING ASSEM.  
4. 3B-2225 [4] DOWEL  
5. 3D-6627 [3] STUD  
6. 2A-0309 [2] DOWEL  
7. 5D-9733 [1] BEARING  
8. 1M-0569 [2] DOWEL  
9. 9S-1366 C [8] BOLT  
  8M-4791 [8] WASHER  
10. 6D-2686 [1] COVER ASSEM.  
11. 5D-8509 [4] BEARING  
12. 0T-0065 [32] BOLT  
  5M-2894 [32] WASHER  
13. 7D-3772 [2] GEAR ASSEM. (38 Teeth)  
14. 7D-3773 [2] BEARING  
15. 6D-4621 [2] WASHER (.045" Thick)  
  6D-6134 [2] WASHER (.052" Thick)  
  5D-8528 [2] WASHER (.059" Thick)  
  5D-8529 [2] WASHER (.066" Thick)  
  6D-6135 [2] WASHER (.067" Thick)  
  6D-4622 [2] WASHER (.075" Thick)  
  6D-4623 [2] WASHER (.090" Thick)  
16. 5D-8527 [1] SHAFT  
17. 4F-7389 [1] SEAL  
18. 6D-4886 [1] ADAPTER  
19. 0S-1594 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
20. 3K-4897 [2] PIN  
21. 6D-4934 [1] SCREEN ASSEM.  
22. 6D-4930 [1] RETAINER  
23. 0L-1045 [1] SPRING  
24. 6D-4938 [1] TUBE ASSEM.  
  8M-7160 [3] MAGNET  
25. 5J-8877 [1] ELEMENT ASSEM. (Disposable)  
26. 6D-4929 [1] SEAT  
27. 3K-4056 [1] SPRING  
28. 6D-5723 [1] SEAT ASSEM.  
29. 6D-4957 [1] BOLT  
  1H-1023 [1] SEAL  
30. 6D-4933 [1] RETAINER  
31. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
32. 6D-6199 [1] CAGE  
33. 6D-6186 [1] WASHER  
34. 1B-4443 [1] NUT  
  3B-4621 [1] COTTER PIN  
35. 6D-6190 [1] HOUSING ASSEM.  
  0L-2061 [2] DOWEL  
36. 2J-3862 [1] BEARING  
37. 2B-2994 [2] DOWEL  
38. 5M-1932 [6] STUD  
39. 6D-6187 [8] SHIM (.005" Thick)  
  6D-6189 [3] SHIM (.010" Thick)  
40. 2K-4472 [1] SEAL  
41. 6B-9126 [1] WASHER  
42. 3S-9032 [1] BEARING  
  7D-1188 [2] RACE  
43. 3D-0231 [1] SEAL  
44. 6D-1754 C [26] PIN  
45. 5D-8443 [1] COUPLING  
46. 6D-6183 [1] SHAFT ASSEM.  
47. 5D-9807 [1] SPACER  
  3H-1461 [1] SEAL  
48. 6D-6178 [1] COUPLING ASSEM.  
  8B-3009 [2] BEARING  
49. 2H-3843 [1] SEAL  
50. 5D-8461 [1] PINION  
51. 0L-1329 [1] BOLT  
  5D-8471 [1] WASHER  
52. 6D-3778 [1] PAD  
  C   INDICATES CHANGE
 

#UE0701110293
 

6D-6180: CONTROL GP-POWER

POWER CONTROL (6D6180 N/S)--As Viewed from Right Hand Side of Machine--Part 4 of 4
Serial No. 13K2564 to 13K3379 inclusive & 33K373-Up
6J6499, 7J8289, 6J6500 & 7J8290 Valve parts are shown on Pages 98, 98A, 98B & 98C
c128917 UE070111
6D6180 CONTROL GP-POWER Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-6500 [1] VALVE GROUP (L.H.)  
  6J-6499 [1] VALVE GROUP (R.H.)  
    - or -
  7J-8290 [1] VALVE GROUP (L.H.)  
  7J-8289 Y [1] VALVE GROUP (R.H.)  
    (See Separate Illustration)
2. 2J-0157 [14] SEAL  
3. 3H-2617 [4] PIN  
4. 0T-0573 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
5. 7D-0742 [1] HOUSING (L.H.)  
  7D-0741 [1] HOUSING (R.H.)  
6. 5D-8524 [8] HOUSING  
7. 7D-3816 [8] GEAR ASSEM. (35 Teeth)  
8. 7D-3818 [16] BEARING  
    (2 in each 7D3816 Assem.)
9. 2M-2858 R [4] SEAL GROUP  
10. 5D-8771 [4] YOKE ASSEM.  
11. 5D-8547 [4] RETAINER (1 in each 5D8771 Assem.)  
12. 1B-4206 [4] NUT  
  3B-4510 [4] LOCKWASHER  
13. 6D-3763 [8] SPRING  
14. 5D-8523 [8] CLUTCH  
15. 5D-8517 [8] PISTON ASSEM.  
16. 5D-8516 [8] BEARING  
    (1 in each 5D8517 Assem.)
17. 6D-2358 [40] DISC (Inner)  
18. 5D-8526 [48] DISC (Outer)  
19. 6D-0473 [8] SEAL (Plastic)  
  4H-9105 [8] SEAL (Rubber)  
20. 5D-8491 [8] WASHER  
21. 6D-0469 [8] SEAL (Plastic)  
  2J-8163 [8] SEAL (Rubber)  
22. 6D-1519 [4] SHAFT  
23. 7D-0848 [8] WASHER  
24. 6D-5510 [8] RETAINER  
25. 6D-1605 [4] PLATE  
26. 6D-1606 [4] LOCK  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UE0701110294
 

7D-2630: POWER CONTROL

POWER CONTROL (7D2630 N/S)--As Viewed from Operator's Seat--Part 1 of 4
Effective with Serial No. 13K3380
Refer also to Pages 169 through 188 for special parts
c131432 UE070111
7D2630 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-8704 [4] KEY  
2. 6D-6182 [1] PLUNGER ASSEM.  
3. 5D-8556 [2] LEVER  
4. 0S-1571 [4] BOLT  
5. 6D-0679 [4] KNOB  
6. 5D-8555 [2] LEVER  
7. 1B-2886 [15] BOLT  
8. 3B-4508 [21] LOCKWASHER  
9. 9S-6130 [3] PLUG  
  2S-4078 [3] SEAL  
10. 9S-8004 [4] PLUG  
  3J-1907 [4] SEAL  
11. 7D-0243 [1] COVER ASSEM.  
12. 1D-4719 [6] NUT  
13. 6D-6197 [3] SHIM (.005" Thick)  
  6D-6198 [3] SHIM (.010" Thick)  
14. 6D-1733 [1] CONE  
15. 6D-1734 [1] CUP  
16. 7D-2637 [1] GEAR (24 Teeth)  
17. 3B-4506 [16] LOCKWASHER  
18. 2M-4453 [2] SEAL  
19. 6D-6195 [1] CARRIER  
20. 6D-6192 [1] GEAR (28 Teeth)  
  1B-8714 [1] KEY  
21. 6D-6193 [3] SHIM (.005" Thick)  
  6D-6194 [1] SHIM (.010" Thick)  
22. 1H-8037 [1] YOKE  
23. 7H-0387 [1] NUT  
24. 2J-8333 [1] SEAL  
25. 2H-0929 [3] CUP  
26. 2H-0930 [3] CONE  
27. 6D-6196 [1] WORM  
28. 2H-6338 [1] SEAL  
29. 5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
30. 6D-6204 [1] COVER ASSEM.  
31. 2L-9315 [1] GUIDE  
    (Part of 6D6204 Assem.)
32. 6D-6202 [1] GASKET  
33. 0S-1594 [17] BOLT  
34. 7H-1861 [4] LOCK  
35. 7D-2633 [1] CAGE  
36. 9S-4190 [4] PLUG  
  2M-9780 [4] SEAL  
37. 0L-1351 [3] BOLT  
38. 0S-1625 [6] BOLT  
  1D-4720 [6] NUT  
  3B-4510 [6] LOCKWASHER  
39. 4J-4742 [1] BODY ASSEM.  
  7M-8485 [1] SEAL  
 

#UE0701110295
 

7D-2630: POWER CONTROL

POWER CONTROL (7D2630 N/S)--As Viewed from Front of Machine--Part 2 of 4
Serial No. 13K3380-Up
6D8202 Pump parts are shown on Page 98A
c118198 UE070111
7D2630 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VENT ASSEM.  
2. 2H-5330 [8] BOLT  
3. 3B-4506 [18] LOCKWASHER  
4. 6D-3928 [2] HOUSING ASSEM.  
  2D-8641 [1] PIN  
  6D-3929 [2] GASKET  
5. 1B-8704 [4] KEY  
6. 4J-3044 [4] BEARING  
7. 5D-8553 [4] LEVER  
  4D-5531 [4] BOLT  
8. 4K-4114 [4] SEAL  
9. 5D-8552 [4] SHAFT  
10. 4B-3671 [4] BEARING  
11. 2B-0947 [15] BOLT  
12. 0L-2070 [8] BOLT  
13. 9S-4185 [2] PLUG  
  3K-0360 [2] SEAL  
14. 6D-3248 [1] BRACKET (Left Hand)  
15. 0S-1589 [4] BOLT  
  1D-4720 [4] NUT  
16. 3B-4510 [8] LOCKWASHER  
17. 0T-0102 [2] BOLT  
18. 0L-0364 [2] LOCK  
19. 0L-1351 [2] BOLT  
20. 5D-8508 [1] GASKET  
21. 2K-4472 [1] SEAL  
22. 9S-4190 [1] PLUG  
  2M-9780 [1] SEAL  
23. 6D-4900 [1] COVER  
24. 0S-1595 [4] BOLT  
25. 3B-4508 [19] LOCKWASHER  
26. 2D-8422 [1] SPACER  
27. 5D-8539 [1] TUBE ASSEM. (Right Hand)  
  5D-8540 [1] TUBE ASSEM. (Left Hand)  
28. 5F-1678 [4] SEAL  
29. 1H-5728 [2] SEAL  
30. 6D-8202 Y [2] PUMP ASSEM.  
    (See Separate Illustration)
31. 4J-5268 [4] SEAL  
32. 5F-7054 [2] SEAL  
33. 4F-7391 [2] SEAL  
34. 6D-5769 [2] SLEEVE  
35. 6D-3247 [1] BRACKET (Right Hand)  
36. 0S-1566 [4] BOLT  
37. 7D-2642 [1] COVER ASSEM.  
38. 6D-4585 C [4] BEARING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UE0701110296
 

7D-2630: POWER CONTROL

POWER CONTROL (7D2630 N/S)--As Viewed from Right Hand Side of Machine--Part 3 of 4
Effective with Serial No. 13K3380
c139462 UE070111
7D2630 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-8507 [1] GASKET  
2. 2M-4453 [16] SEAL  
3. 6D-9092 [1] HOUSING ASSEM.  
4. 3B-2225 [4] DOWEL  
5. 3D-6627 [3] STUD  
6. 2A-0309 [4] DOWEL  
7. 7D-0246 [1] BEARING  
8. 6D-3778 [1] PAD  
9. 9S-1366 [4] BOLT  
  2M-0849 [4] WASHER  
10. 7D-2640 [1] COVER ASSEM.  
11. 6D-4585 [4] BEARING  
12. 0L-1143 [32] BOLT  
13. 7D-3772 [2] GEAR ASSEM. (38 Teeth)  
14. 7D-5316 [2] BEARING  
15. 6D-4621 [2] WASHER (.045" Thick)  
  6D-6134 [2] WASHER (.052" Thick)  
  5D-8528 [2] WASHER (.059" Thick)  
  5D-8529 [2] WASHER (.066" Thick)  
  6D-6135 [2] WASHER (.067" Thick)  
  6D-4622 [2] WASHER (.075" Thick)  
  6D-4623 [2] WASHER (.090" Thick)  
16. 7D-2639 [1] SHAFT  
17. 4F-7389 [1] SEAL  
18. 6D-4886 [1] ADAPTER  
19. 0S-1594 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
20. 3K-4897 [2] PIN  
21. 6D-4934 [1] SCREEN ASSEM.  
22. 6D-4930 [1] RETAINER  
23. 0L-1045 [1] SPRING  
24. 6D-4938 [1] TUBE ASSEM.  
  8M-7160 [3] MAGNET  
25. 5J-8877 [1] ELEMENT ASSEM. (Disposable)  
26. 6D-4929 [1] SEAT  
27. 3K-4056 [1] SPRING  
28. 6D-5723 [1] SEAT ASSEM.  
  6D-5722 [1] SEAL  
29. 6D-4957 [1] BOLT  
  1H-1023 [1] SEAL  
30. 6D-4933 [1] RETAINER  
31. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
32. 6D-6199 [1] CAGE  
33. 0S-1590 [10] BOLT  
  9H-8524 [10] NUT  
  5M-2894 [10] WASHER  
34. 6B-3224 [2] CUP  
35. 4F-0559 [1] CONE  
36. 7D-2631 [1] HOUSING ASSEM.  
  0L-2061 [2] DOWEL  
37. 2B-2994 [2] DOWEL  
38. 5M-1932 [6] STUD  
39. 2K-4472 [1] SEAL  
40. 7D-2634 C [2] SHIM (.003" Thick)  
  7D-2635 [4] SHIM (.010" Thick)  
41. 7D-2636 [1] HUB  
42. 5D-9662 [1] CONE  
43. 5L-4776 [1] SEAL  
44. 7D-2638 [1] SHAFT  
45. 1H-9696 [2] SEAL  
46. 7D-0247 [1] RETAINER ASSEM.  
  2A-3348 [1] PIN  
47. 2M-2858 R [1] SEAL GROUP  
  1M-3097 [2] RING  
48. 7D-0249 [1] PINION  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UE0701110297
 

7D-2630: POWER CONTROL

POWER CONTROL (7D2630 N/S)--Part 4 of 4
As Viewed from Right Hand Side of Machine
Effective with Serial No. 13K3380
7J9283 & 7J9284 Valve parts are shown on Pages 98B & 99
c131435 UE070111
7D2630 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-2655 [4] HOUSING ASSEM.  
  6B-6863 [4] PIN  
    (1 in each 7D2655 Assem.)
2. 7J-9284 [1] VALVE GROUP (L.H.)  
  7J-9283 Y [1] VALVE GROUP (R.H.)  
    (See Separate Illustration)
3. 0T-0573 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
4. 7D-8213 [1] HOUSING ASSEM. (L.H.)  
  6B-6863 [3] PIN  
    (Part of 7D8213 Assem.)
  7D-8214 [1] HOUSING ASSEM. (R.H.)  
  6B-6863 [5] PIN  
    (Part of 7D8214 Assem.)
5. 2J-0157 [10] SEAL  
6. 6D-4584 [8] WASHER  
7. 7D-2659 [8] SPRING  
8. 7D-2657 [4] HOUSING  
9. 6D-9084 [8] WASHER  
10. 7D-2649 [8] CLUTCH  
11. 7D-2645 [8] GEAR ASSEM. (35 & 46 Teeth)  
12. 7D-3818 [16] BEARING  
    (2 in each 7D2645 Assem.)
13. 1J-6474 [8] RING  
14. 7D-0088 [4] YOKE  
15. 8B-4967 [4] SEAL  
16. 0L-1329 [4] BOLT  
17. 6D-9081 [4] RETAINER  
18. 2M-2858 R [4] SEAL GROUP  
  1M-3097 [8] RING  
    (2 in each 2M2858 Group)
19. 7D-0848 [8] WASHER  
20. 2J-8172 [8] RING  
21. 6D-4536 [56] DISC (Inner)  
22. 6D-4535 [56] DISC (Outer)  
23. 6D-8738 [8] RETAINER  
24. 6D-0469 [4] SEAL (Plastic)  
25. 2J-8163 [8] SEAL (Rubber)  
26. 7D-2653 [4] PISTON ASSEM.  
27. 6D-4581 [4] BEARING  
    (1 in each 7D2653 Assem.)
28. 6D-0473 [8] SEAL (Plastic)  
  4H-9105 [8] SEAL (Rubber)  
29. 1A-5822 [4] BOLT  
  2M-0849 [4] WASHER  
30. 6D-8977 [24] DISC (Inner)  
31. 5D-8526 [28] DISC (Outer)  
32. 9S-4181 [1] PLUG (R.H.-HOUSING)  
  7M-8485 [1] SEAL  
  7D-7761 [1] ADAPTER (L.H.-HOUSING)  
  3H-4987 [1] GASKET  
33. 6D-5512 [4] SEAL (Plastic)  
34. 7D-2651 [4] PISTON ASSEM.  
35. 6D-4581 [4] BEARING  
    (1 in each 7D2651 Assem.)
36. 7D-2644 [4] SHAFT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UE0701110298
 

8D-0420: POWER CONTROL CONVERSION ARRANGEMENT

8D420 POWER CONTROL CONVERSION ARRANGEMENT
Serial No. 13K1 to 13K3379 inclusive
TO CONVERT TO MULTI-DISC POWER CONTROL BOX
UE0701110298 UE070111
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8D-0430 Y [1] CLUTCH CONVERSION GROUP--L.H.  
  8D-0440 Y [1] CLUTCH CONVERSION GROUP--R.H.  
  7J-9915 Y [2] RELIEF VALVE GROUP  
  8B-4967 [4] SEAL--TO OUTPUT SHAFT  
  5D-8507 [1] GASKET--REAR COVER  
  5D-8508 [1] GASKET--FRONT COVER  
  6D-0392 [2] RETAINER--TO RETAIN LIFT ARMS  
  6D-2534 [8] LOCK--TO YOKE  
  6D-3929 [2] GASKET--LEVER HOUSING  
  6D-4585 [8] BEARING--FRONT & REAR COVER BEARINGS  
  6D-5736 [4] ADAPTER--TO SEAL HYDRAULIC DUMP CONTROL PORTS  
  6D-9081 [4] RETAINER--TO YOKE  
  7D-0088 [4] YOKE--TO OUTPUT SHAFT  
  7D-2409 [2] STOP--TO FRAME  
  7D-3565 [1] FILM--ON POWER CONTROL OIL FILL PLUG  
  8D-0448 [1] PIN--TO REPLACE SHEAR PIN  
  4F-7389 [1] SEAL--TO SEAL DEAD SHAFT TO FRONT COVER  
  4F-7391 [2] SEAL--TO SEAL PUMPS TO CASE  
  5F-1678 [2] SEAL--TO SEAL PUMPS TO CASE  
  5F-7054 [2] SEAL--TO SEAL SUCTION TUBE TO PUMP  
    (Pump End Only)
  1H-5728 [2] SEAL--TO SEAL PUMPS TO CASE  
  2J-0157 [10] SEAL--TO SEAL SPOOL VALVES TO BRAKE HOUSING  
  3J-1907 [6] SEAL--TO PLUG  
  3J-7470 [4] SHIM--FOR RELIEF VALVE  
  3J-7473 [4] SHIM--FOR RELIEF VALVE  
  4J-5268 [4] SEAL--TO SEAL SLEEVE TO PUMP & BRAKE HOUSING  
  5J-8877 [1] ELEMENT ASSEMBLY  
  6J-1038 [4] SEAL--TO ADAPTER  
  3K-0360 [6] SEAL--TO PLUG  
  4K-1388 [4] SEAL--TO ADAPTER  
  0L-1329 [4] BOLT--TO OUTPUT SHAFT  
  2M-4453 [4] SEAL--TO SEAL BRAKE HOUSING TO MAIN HOUSING  
  9S-4185 [2] PLUG--TO SEAL HYDRAULIC PUMP OUTLET  
  9S-4185 [2] PLUG--TO SEAL HYDRAULIC PUMP TO SUMP OF LIMIT  
    System
  9S-4185 [2] PLUG--TO SEAL SOLENOID PUMP OPENINGS  
  9S-4191 [4] PLUG--TO ADAPTER  
  9S-4191 [2] PLUG--TO SEAL HYDRAULIC PUMP OUTLET  
  Y   SEPARATE ILLUSTRATION
 

#UE0701110299
 

8D-0430: CLUTCH CONVERSION GROUP

8D430 CLUTCH CONVERSION GROUP--L.H.
Serial No. 13K1 to 13K3379 inclusive
Part of 8D420 Power Control Conversion Arrangement listed on Page 97B
c138181 UE070111
8D0430 CLUTCH CONVERSION GROUP Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [16] BOLT  
2. 7D-2655 [3] HOUSING ASSEM.  
  6B-6863 [1] PIN  
3. 2M-4453 [8] SEAL  
4. 7D-8213 [1] HOUSING ASSEM.  
  6B-6863 [3] PIN  
5. 6D-4584 [4] WASHER  
6. 7D-2657 [1] HOUSING  
7. 7D-2659 [4] SPRING  
8. 6D-8738 [4] RETAINER  
9. 7D-2649 [4] CLUTCH  
10. 2J-8172 [4] RING  
11. 7D-2645 [4] GEAR ASSEM. (35 & 46 Teeth)  
12. 7D-3818 [2] BEARING  
13. 1J-6474 [4] RING  
14. 7D-0848 [4] WASHER  
15. 6D-4536 [28] DISC (Inner)  
16. 6D-4535 [28] DISC (Outer)  
17. 6D-9084 [4] WASHER  
18. 6D-0469 [1] SEAL (Plastic)  
  2J-8163 [4] SEAL (Rubber)  
19. 7D-2653 [1] PISTON ASSEM.  
20. 6D-4581 [1] BEARING  
21. 6D-0473 [4] SEAL (Plastic)  
  4H-9105 [4] SEAL (Rubber)  
22. 6D-8977 [12] DISC (Inner)  
23. 5D-8526 [14] DISC (Outer)  
24. 7D-7761 [1] ADAPTER  
  3H-4987 [1] GASKET  
25. 6D-5512 [3] SEAL (Plastic)  
26. 7D-2651 [3] PISTON ASSEM.  
27. 6D-4581 [1] BEARING  
28. 7D-2644 [2] SHAFT  
  9S-8004 H [4] PLUG  
  3J-1907 H [4] SEAL  
  H   NOT SHOWN
 

Information:

Caterpillar Parts SIS Catalog 12F :

6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
6D-6180 CONTROL GP-POWER
POWER CONTROL
7D-2630 POWER CONTROL
7D-2630 POWER CONTROL
7D-2630 POWER CONTROL
7D-2630 POWER CONTROL
8D-0420 POWER CONTROL CONVERSION ARRANGEMENT

Truck sale:

Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
 
Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
MUSTANG CAT
Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
 
Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
FABICK CAT
Caterpillar 312F, Raupenbagger, Bau-Und Bergbauausrüstung
149.800 
Caterpillar 312F, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
YANCEY BROS. CO.
Caterpillar 12F, Construction
13,000 
Caterpillar 12F, Construction
- motor graders
ALTORFER INC.
Caterpillar 312F GC, Construction
159,900 
Caterpillar 312F GC, Construction
- Crawler Excavators
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.