AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

POWER CONTROL--As Viewed from Right Hand Side of Machine--Part 4 of 4 Serial No. 72G131 to 72G381 inclusive 6J6499 & 6J6500 Valve parts are shown on Page 106 14E


HYDRAULIC SYSTEM
CONTROL GP-POWER
VALVE GP-CONTROL

MOTOR GRADER 14E MOTOR GRADER 72G
 NO. 14E MOTOR GRADER / POWER SHIFT / 72G00001-01340 (MACHINE) UEG0029S 14E 72G   (1969)

HYDRAULIC SYSTEM

CONTROL GP-POWER
POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
6D-6840 POWER CONTROL
6D-6840 POWER CONTROL
6D-6840 POWER CONTROL
 

#UEG0029S0270
 

POWER CONTROL

POWER CONTROL--As Viewed from Right Hand Side of Machine--Part 4 of 4
Serial No. 72G131 to 72G381 inclusive
6J6499 & 6J6500 Valve parts are shown on Page 106
c125855 UEG0029S
None POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-6500 Y [1] VALVE GROUP (Left Hand)  
  6J-6499 Y [1] VALVE GROUP (Right Hand)  
    (See Separate Illustration)
2. 2J-0157 [14] SEAL  
3. 3H-2617 [4] PIN  
4. 0T-0573 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
5. 7D-0742 [1] HOUSING (Left Hand)  
  7D-0741 [1] HOUSING (Right Hand)  
6. 5D-8524 [8] HOUSING  
7. 5D-8512 [8] GEAR ASSEM. (35 Teeth)  
8. 4D-8144 [16] BEARING  
    (2 in each 5D8512 Gear Assem.)
9. 2M-2858 R [4] SEAL GROUP  
10. 5D-8771 [4] YOKE ASSEM.  
11. 5D-8547 [4] RETAINER  
    (1 in each 5D8771 Yoke Assem.)
12. 7H-7810 [4] NUT  
13. 6D-3763 [8] SPRING  
14. 5D-8523 [8] CLUTCH  
15. 5D-8517 [8] PISTON ASSEM.  
16. 5D-8516 [8] BEARING  
    (1 in each 5D8517 Piston Assem.)
17. 6D-2358 [40] DISC (Inner)  
18. 5D-8526 [48] DISC (Outer)  
19. 6D-0473 [8] SEAL (Plastic)  
  4H-9105 [8] SEAL (Rubber)  
20. 5D-8491 [8] WASHER  
21. 6D-0469 [8] SEAL (Plastic)  
  2J-8163 [8] SEAL (Rubber)  
22. 6D-1519 [4] SHAFT  
23. 7D-0848 C [8] WASHER  
24. 6D-5510 [8] RETAINER  
25. 6D-1605 [4] PLATE  
26. 6D-1606 [4] LOCK  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0029S0271
 

6D-6840: POWER CONTROL

POWER CONTROL (6D6840 N/S)--As Viewed from Operator's Seat--Part 1 of 4
Serial No. 72G382 to 72G582 inclusive
Refer also to Pages 175 through 194 for special parts
See Page 26 for Gasket Kits
c159954 UEG0029S
6D6840 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-8704 [4] KEY  
2. 5D-8556 [2] LEVER  
3. 0S-1571 [4] BOLT  
4. 6D-0679 [4] KNOB  
5. 5D-8555 [2] LEVER  
6. 1B-2886 [15] BOLT  
7. 3B-4508 [21] LOCKWASHER  
8. 9S-6130 C [3] PLUG  
9. 2S-4078 C [3] SEAL  
10. 5D-8487 [1] COVER  
11. 1D-4719 [6] NUT  
12. 7D-3901 C [2] SHIM .08 mm(.003 in.) thick  
  6D-6197 C [2] SHIM .13 mm(.005 in.) thick  
  6D-6198 [3] SHIM .26 mm(.010 in.) thick  
13. 6D-1733 [1] CONE  
14. 6D-1734 [1] CUP  
15. 7D-1945 C [1] GEAR (24 teeth)  
16. 6D-6195 [1] CARRIER  
17. 6D-6192 [1] GEAR (28 Teeth)  
  1B-8714 [1] KEY  
18. 7D-3899 C [2] SHIM .08 mm(.003 in.) thick  
  6D-6193 C [2] SHIM .13 mm(.005 in.) thick  
  6D-6194 [1] SHIM[.26 MM(.010 IN.) THICK  
19. 1H-8037 [1] YOKE  
20. 7H-0387 [1] NUT  
21. 2J-8333 [1] SEAL  
22. 2H-0929 [3] CUP  
23. 2H-0930 [3] CONE  
24. 6D-6196 [1] WORM  
25. 2H-6338 [1] SEAL  
26. 5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
27. 6D-6204 [1] COVER ASSEM.  
28. 2L-9315 [1] GUIDE  
    (Part of 6D6204 Assem.)
29. 6D-6202 [1] GASKET  
30. 0S-1594 [17] BOLT  
31. 7H-1861 [4] LOCK  
32. 6D-6191 [1] COVER  
33. 9S-4190 C [2] PLUG  
  2M-9780 C [2] SEAL  
34. 3B-4506 [13] LOCKWASHER  
35. 6D-6182 [1] PLUNGER ASSEM.  
36. 0S-1625 [6] BOLT  
  1D-4720 [6] NUT  
  3B-4510 [6] LOCKWASHER  
37. 9S-4185 C [1] PLUG  
  3K-0360 C [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0029S0272
 

6D-6840: POWER CONTROL

POWER CONTROL (6D6840 N/S)--As Viewed from Front of Machine--Part 2 of 4
Serial No. 72G382 to 72G582 inclusive
6D8202 Pump parts are shown on Page 101
c128919 UEG0029S
6D6840 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VENT ASSEM.  
2. 2H-5330 [8] BOLT  
3. 3B-4506 [18] LOCKWASHER  
4. 6D-3928 [2] HOUSING ASSEM.  
  2D-8641 [2] PIN  
    (1 in each 6D3928 Housing Assem.)
  6D-3929 [2] GASKET  
5. 1B-8704 [4] KEY  
6. 4J-3044 [4] BEARING  
7. 5D-8553 [4] LEVER  
  4D-5531 [4] BOLT  
8. 4K-4114 [4] SEAL  
9. 5D-8552 [4] SHAFT  
10. 4B-3671 [4] BEARING  
11. 1H-7339 [2] SEAL  
12. 0L-2070 [8] BOLT  
13. 4J-4742 [1] BODY ASSEM.  
  7M-8485 [1] SEAL  
14. 6D-3248 [1] BRACKET (Left Hand)  
15. 0S-1589 [4] BOLT  
  1D-4720 [4] NUT  
16. 3B-4510 [8] LOCKWASHER  
17. 0T-0102 [2] BOLT  
18. 0L-0364 [2] LOCK  
19. 0L-1351 [2] BOLT  
20. 6D-2688 [1] COVER ASSEM.  
21. 5D-8509 [4] BEARING  
    (Part of 6D2688 Assem.)
22. 9S-4190 C [1] PLUG  
  2M-9780 C [1] SEAL  
23. 6D-4900 [1] COVER  
24. 0S-1595 [4] BOLT  
25. 3B-4508 [19] LOCKWASHER  
26. 2D-8422 [1] SPACER  
27. 5D-8539 [1] TUBE ASSEM. (Right Hand)  
  5D-8540 [1] TUBE ASSEM. (Left Hand)  
28. 5F-1678 [4] SEAL  
29. 1H-5728 [2] SEAL  
30. 6D-8202 Y [2] PUMP ASSEM.  
    (See Separate Illustration)
31. 4J-5268 [4] SEAL  
32. 5F-7054 [2] SEAL  
33. 4F-7391 [2] SEAL  
34. 6D-5769 [2] SLEEVE  
35. 6D-3247 [1] BRACKET (Right Hand)  
36. 0S-1566 [4] BOLT  
37. 2B-0947 [15] BOLT  
38. 2K-4472 [1] SEAL  
39. 5D-8508 [1] GASKET  
  C   INDICATES CHANGE FROM PREVIOUS
  Y   SEPARATE ILLUSTRATION
 

#UEG0029S0273
 

6D-6840: POWER CONTROL

POWER CONTROL (6D6840 N/S)--As Viewed from Right Hand Side of Machine--Part 3 of 4
Serial No. 72G382 to 72G582 inclusive
c128920 UEG0029S
6D6840 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-8507 [1] GASKET  
2. 2M-4453 [16] SEAL  
3. 7D-0700 [1] HOUSING ASSEM.  
4. 3B-2225 [4] DOWEL  
5. 3D-6627 [3] STUD  
6. 2A-0309 [2] DOWEL  
7. 5D-9733 [1] BEARING  
8. 1M-0569 [2] DOWEL  
    (Parts of 7D700 Housing Assem.)
9. 9S-1366 [8] BOLT  
  8M-4791 [8] WASHER  
10. 6D-2686 [1] COVER ASSEM.  
11. 5D-8509 [4] BEARING  
    (Part of 6D2686 Cover Assem.)
12. 0T-0065 [32] BOLT  
  5M-2894 [32] WASHER  
13. 7D-3772 C [2] GEAR ASSEM. (38 Teeth)  
14. 7D-5316 [4] BEARING  
    (Part of 7D3772 Gear Assem.)
15. 6D-4621 [2] WASHER (.045" Thick)  
  6D-6134 [2] WASHER (.052" Thick)  
  5D-8528 [2] WASHER (.059" Thick)  
  5D-8529 [2] WASHER (.066" Thick)  
  6D-6135 [2] WASHER (.067" Thick)  
  6D-4622 [2] WASHER (.075" Thick)  
  6D-4623 [2] WASHER (.090" Thick)  
16. 5D-8527 [1] SHAFT  
17. 4F-7389 [1] SEAL  
18. 6D-4886 [1] ADAPTER  
19. 0S-1594 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
20. 3K-4897 [2] PIN  
21. 6D-4934 [1] SCREEN ASSEM.  
22. 6D-4930 [1] RETAINER  
23. 0L-1045 [1] SPRING  
24. 6D-4938 [1] TUBE ASSEM.  
  8M-7160 [3] MAGNET  
    (Part of 6D4938 Tube Assem.)
25. 5J-8877 [1] ELEMENT ASSEM. (Disposable)  
26. 6D-4929 [1] SEAT  
27. 3K-4056 [1] SPRING  
28. 6D-5723 [1] SEAT ASSEM.  
29. 6D-4957 [1] BOLT  
  1H-1023 [1] SEAL  
30. 6D-4933 [1] RETAINER  
31. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
32. 6D-6199 [1] CAGE  
33. 6D-6186 [1] WASHER  
34. 1B-4443 [1] NUT  
  3B-4621 [1] COTTER PIN  
35. 6D-6190 [1] HOUSING ASSEM.  
  0L-2061 [2] DOWEL  
36. 2J-3862 [1] BEARING  
37. 2B-2994 [2] DOWEL  
38. 5M-1932 [6] STUD  
    (Parts of 6D6190 Housing Assem.)
39. 6D-6187 [8] SHIM (.005" Thick)  
  6D-6189 [3] SHIM (.010" Thick)  
40. 2K-4472 [1] SEAL  
41. 6B-9126 [1] WASHER  
42. 3S-9032 [1] BEARING  
43. 3D-0231 [1] SEAL  
44. 6D-1754 C [26] PIN  
45. 5D-8443 [1] COUPLING  
46. 6D-6183 [1] SHAFT ASSEM.  
47. 5D-9807 [1] SPACER  
  3H-1461 [1] SEAL  
    (Parts of 6D6183 Shaft Assem.)
48. 1A-6308 C [1] BOLT  
  1B-4437 [1] NUT  
  3B-4605 [1] COTTER PIN  
  0S-1012 C [1] SPRING  
49. 2H-3843 [1] SEAL  
50. 5D-8461 [1] PINION  
51. 0L-1329 [1] BOLT  
  5D-8471 [1] WASHER  
52. 6D-6178 [1] COUPLING ASSEM.  
53. 8B-3009 [2] BEARING  
54. 7D-1963 [3] BUSHING  
    (Parts of 6D6178 Assem.)
55. 6D-3778 [1] PAD  
56. 7D-1188 [2] RACE  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0029S0274
 

6D-6840: POWER CONTROL

POWER CONTROL (6D6840 N/S)--As Viewed from Right Hand Side of Machine--Part 4 of 4
Serial No. 72G382 to 72G582 inclusive
6J6499, 6J6500, 7J8289 & 7J8290 Valve parts are shown on Pages 106 & 106A
c131768 UEG0029S
6D6840 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-6500 [1] VALVE GROUP (L.H.)  
    -OR-
  7J-8290 [1] VALVE GROUP (L.H.)  
  6J-6499 [1] VALVE GROUP (R.H.)  
    -OR-
  7J-8289 Y [1] VALVE GROUP (R.H.)  
    (See Separate Illustration)
2. 2J-0157 [14] SEAL  
3. 3H-2617 [4] PIN  
4. 0T-0573 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
5. 7D-0742 [1] HOUSING (L.H.)  
  7D-0741 [1] HOUSING (R.H.)  
6. 5D-8524 [8] HOUSING  
7. 7D-3816 [8] GEAR ASSEM. (35 Teeth)  
8. 7D-3818 [16] BEARING  
    (2 in each 7D3816 Assem.)
9. 2M-2858 R [4] SEAL GROUP  
10. 5D-8771 [4] YOKE ASSEM.  
11. 5D-8547 [4] RETAINER  
    (1 in each 5D8771 Assem.)
12. 1B-4206 [4] NUT  
13. 6D-3763 [8] SPRING  
14. 5D-8523 [8] CLUTCH  
15. 5D-8517 [8] PISTON ASSEM.  
16. 5D-8516 [8] BEARING  
    (1 in each 5D8517 Assem.)
17. 6D-2358 [40] DISC (Inner)  
18. 5D-8526 [48] DISC (Outer)  
19. 6D-0473 [8] SEAL (Plastic)  
  4H-9105 [8] SEAL (Rubber)  
20. 5D-8491 [8] WASHER  
21. 6D-0469 [8] SEAL (Plastic)  
  2J-8163 [8] SEAL (Rubber)  
22. 6D-1519 [4] SHAFT  
23. 7D-0848 [8] WASHER  
24. 6D-5510 [8] RETAINER  
25. 6D-1605 [4] PLATE  
26. 6D-1606 [4] LOCK  
27. 3B-4510 [4] LOCKWASHER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0029S0275
 

7D-2660: POWER CONTROL

POWER CONTROL (7D2660 N/S)--As Viewed from Operator's Seat--Part 1 of 4
Effective with Serial No. 72G583
Refer also to Pages 175 through 194 for special parts
See Page 26 for Gasket Kits
c154497 UEG0029S
7D2660 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-8704 [4] KEY  
2. 5D-8556 [2] LEVER (L.H.)  
3. 0S-1571 [4] BOLT  
4. 6D-0679 [4] KNOB  
5. 5D-8555 [2] LEVER  
6. 1B-2886 [15] BOLT  
7. 3B-4508 [21] LOCKWASHER  
8. 9S-6130 [3] PLUG  
9. 2S-4078 [3] SEAL  
10. 7D-0243 [1] COVER ASSEM.  
11. 1D-4719 [6] NUT  
12. 6D-6197 [2] SHIM .005 in. (0.13 mm) thick  
  6D-6198 [3] SHIM .010 in.(0.26 mm) thick  
13. 6D-1733 [1] CONE  
14. 6D-1734 [1] CUP  
15. 7D-2637 [1] GEAR (24 teeth)  
16. 6D-6195 [1] CARRIER  
17. 6D-6192 [1] GEAR (28 Teeth)  
  1B-8714 [1] KEY  
18. 6D-6193 [2] SHIM .005 in. (0.13 mm) thick  
  6D-6194 [1] SHIM .010 in. (0.26 mm) thick  
19. 1H-8037 [1] YOKE  
20. 2K-4821 [1] NUT  
21. 2J-8333 [1] SEAL  
22. 2H-0929 [3] CUP  
23. 2H-0930 [3] CONE  
24. 6D-6196 [1] WORM  
25. 2H-6338 [1] SEAL  
26. 5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
27. 6D-6204 [1] COVER ASSEM.  
28. 2L-9315 [1] GUIDE  
29. 6D-6202 [1] GASKET  
30. 0S-1594 [13] BOLT  
31. 7H-1861 [4] LOCK  
32. 6D-6199 [1] CAGE  
33. 9S-4190 [3] PLUG  
  2M-9780 [3] SEAL  
34. 3B-4506 [12] LOCKWASHER  
35. 6D-6182 [1] PLUNGER ASSEM.  
36. 0S-1625 [6] BOLT  
  1D-4720 [6] NUT  
  3B-4510 [6] LOCKWASHER  
37. 4J-4742 [1] BODY ASSEM.  
  7M-8485 [1] SEAL  
38. 2M-4453 [2] SEAL  
39. 9S-8004 [4] PLUG  
  3J-1907 [4] SEAL  
40. 0L-1351 [3] BOLT  
41. 7D-3901 [2] SHIM .003 in. (0.08 mm) thick  
42. 7D-3899 [2] SHIM .003 in. (0.08 mm) thick  
 

#UEG0029S0276
 

7D-2660: POWER CONTROL

POWER CONTROL (7D2660 N/S)--As Viewed from Front of Machine--Part 2 of 4
Effective with Serial No. 72G583
6D8202 Pump parts are shown on Page 101
c131429 UEG0029S
7D2660 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-5330 [8] BOLT  
2. 3B-4506 [18] LOCKWASHER  
3. 6D-3928 [2] HOUSING ASSEM.  
  2D-8641 [2] PIN  
    (1 in each 6D3928 Housing Assem.)
  6D-3929 [2] GASKET  
4. 1B-8704 [4] KEY  
5. 4J-3044 [4] BEARING  
6. 5D-8553 [4] LEVER  
  4D-5531 [4] BOLT  
7. 4K-4114 [4] SEAL  
8. 5D-8552 [4] SHAFT  
9. 4B-3671 [4] BEARING  
10. 5D-8508 [1] GASKET  
11. 0L-2070 [8] BOLT  
12. 2B-0947 [15] BOLT  
13. 2K-4472 [1] SEAL  
14. 6D-3248 [1] BRACKET (Left Hand)  
15. 0S-1589 [4] BOLT  
  1D-4720 [4] NUT  
16. 3B-4510 [8] LOCKWASHER  
17. 0T-0102 [2] BOLT  
18. 0L-0364 [2] LOCK  
19. 0L-1351 [2] BOLT  
20. 7D-2642 [1] COVER ASSEM.  
21. 6D-4585 [4] BEARING  
    (Part of 7D2642 Assem.)
22. 9S-4190 [1] PLUG  
  2M-9780 [1] SEAL  
23. 6D-4900 [1] COVER  
24. 0S-1595 [4] BOLT  
25. 3B-4508 [19] LOCKWASHER  
26. 2D-8422 [1] SPACER  
27. 5D-8539 [1] TUBE ASSEM. (Right Hand)  
  5D-8540 [1] TUBE ASSEM. (Left Hand)  
28. 5F-1678 [4] SEAL  
29. 1H-5728 [2] SEAL  
30. 6D-8202 Y [2] PUMP ASSEM.  
    (See Separate Illustration)
31. 4J-5268 [4] SEAL  
32. 5F-7054 [2] SEAL  
33. 4F-7391 [2] SEAL  
34. 6D-5769 [2] SLEEVE  
35. 6D-3247 [1] BRACKET (Right Hand)  
36. 0S-1566 [4] BOLT  
37. 5F-4434 [1] VENT ASSEM.  
38. 9S-4185 [2] PLUG  
  3K-0360 [2] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#UEG0029S0277
 

7D-2660: POWER CONTROL

POWER CONTROL (7D2660 N/S)--As Viewed from Right Hand Side of Machine--Part 3 of 4
Effective with Serial No. 72G583
c131430 UEG0029S
7D2660 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-8507 [1] GASKET  
2. 2M-4453 [16] SEAL  
3. 7D-2665 [1] HOUSING ASSEM.  
4. 3B-2225 [4] DOWEL  
5. 2A-0309 [2] DOWEL  
6. 7D-0246 [1] BEARING  
7. 2B-2994 [2] DOWEL  
    (Parts of 7D2665 Assem.)
8. 9S-1366 [4] BOLT  
9. 2M-0849 [4] WASHER  
10. 7D-2640 [1] COVER ASSEM.  
11. 6D-4585 [4] BEARING  
    (Part of 7D2640 Assem.)
12. 0L-1143 [32] BOLT  
13. 7D-3772 [2] GEAR ASSEM. (38 Teeth)  
14. 7D-5316 [4] BEARING  
    (2 in each 7D3772 Assem.)
15. 6D-4621 [2] WASHER (.045" Thick)  
  6D-6134 [2] WASHER (.052" Thick)  
  5D-8528 [2] WASHER (.059" Thick)  
  5D-8529 [2] WASHER (.066" Thick)  
  6D-6135 [2] WASHER (.067" Thick)  
  6D-4622 [2] WASHER (.075" Thick)  
  6D-4623 [2] WASHER (.090" Thick)  
16. 7D-2639 [1] SHAFT  
17. 4F-7389 [1] SEAL  
18. 6D-4886 [1] ADAPTER  
19. 0S-1594 [7] BOLT  
  3B-4506 [7] LOCKWASHER  
20. 3K-4897 [2] PIN  
21. 6D-4934 [1] SCREEN ASSEM.  
22. 6D-4930 [1] RETAINER  
23. 0L-1045 [1] SPRING  
24. 6D-4938 [1] TUBE ASSEM.  
  8M-7160 [3] MAGNET  
    (Part of 6D4938 Assem.)
25. 5J-8877 [1] ELEMENT ASSEM. (Disposable)  
26. 6D-4929 [1] SEAT  
27. 3K-4056 [1] SPRING  
28. 6D-5723 [1] SEAT ASSEM.  
29. 6D-4957 [1] BOLT  
  1H-1023 [1] SEAL  
30. 6D-4933 [1] RETAINER  
31. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
32. 1H-9696 [2] SEAL  
33. 5L-4776 [1] SEAL  
34. 7D-2638 [1] SHAFT  
35. 7D-2631 [1] HOUSING ASSEM.  
  0L-2061 [2] DOWEL  
36. 2B-2994 [2] DOWEL  
37. 5M-1932 [6] STUD  
    (Parts of 7D2631 Assem.)
38. 7D-2634 [2] SHIM (.005" Thick)  
39. 7D-2635 [4] SHIM (.010" Thick)  
40. 2K-4472 [1] SEAL  
41. 0S-1590 [10] BOLT  
  9H-8524 [10] NUT  
  5M-2894 [10] WASHER  
42. 4F-0559 [1] CONE  
43. 6B-3224 [2] CUP  
44. 7D-2633 [1] CAGE  
45. 7D-2636 [1] HUB  
46. 5D-9662 [1] CONE  
47. 7D-0249 [1] PINION  
48. 7D-0247 [1] RETAINER ASSEM.  
  2A-3348 [1] PIN  
    (Part of 7D247 Assem.)
49. 6D-3778 [1] PAD  
50. 9S-4190 [1] PLUG  
  2M-9780 [1] SEAL  
51. 2M-2858 R [1] SEAL GROUP  
  1M-3097 [2] RING  
    (Part of 2M2858 Seal Group)
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0029S0278
 

7D-2660: POWER CONTROL

POWER CONTROL (7D2660 N/S)--As Viewed from R.H. Side of Machine--Part 4 of 4
Effective with Serial No. 72G583
7J9283 & 7J9284 Valve parts are shown on Page 106B
c131431 UEG0029S
7D2660 POWER CONTROL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-2655 [4] HOUSING ASSEM.  
  6B-6863 [4] PIN  
    (1 in each 7D2655 Assem.)
2. 7J-9284 [1] VALVE GROUP (L.H.)  
  7J-9283 Y [1] VALVE GROUP (R.H.)  
    (See Separate Illustration)
3. 0T-0573 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
4. 7D-8213 [1] HOUSING ASSEM. (L.H.)  
  6B-6863 [3] PIN  
    (Part of 7D8213 Assem.)
  7D-8214 [1] HOUSING ASSEM. (R.H.)  
  6B-6863 [5] PIN  
    (Part of 7D8214 Assem.)
5. 2J-0157 [10] SEAL  
6. 6D-4584 [8] WASHER  
7. 7D-2659 [8] SPRING  
8. 7D-2657 [4] HOUSING  
9. 6D-9084 [8] WASHER  
10. 7D-2649 [8] CLUTCH  
11. 7D-2645 [8] GEAR ASSEM. (35 & 46 Teeth)  
12. 7D-3818 [16] BEARING  
    (2 in each 7D2645 Assem.)
13. 1J-6474 [8] RING  
14. 7D-0088 [4] YOKE  
15. 8B-4967 [4] SEAL  
16. 0L-1329 [4] BOLT  
17. 6D-9081 [4] RETAINER  
18. 2M-2858 R [4] SEAL GROUP  
  1M-3097 [8] RING  
    (2 in each 2M2858 Group)
19. 7D-0848 [8] WASHER  
20. 2J-8172 [8] RING  
21. 6D-4536 [56] DISC (Inner)  
22. 6D-4535 [56] DISC (Outer)  
23. 6D-8738 [8] RETAINER  
24. 6D-0469 [4] SEAL (Plastic)  
25. 2J-8163 [8] SEAL (Rubber)  
26. 7D-2653 [4] PISTON ASSEM.  
27. 6D-4581 [4] BEARING  
    (1 in each 7D2653 Assem.)
28. 6D-0473 [8] SEAL (Plastic)  
  4H-9105 [8] SEAL (Rubber)  
29. 1A-5822 [4] BOLT  
  2M-0849 [4] WASHER  
30. 6D-8977 [24] DISC (Inner)  
31. 5D-8526 [28] DISC (Outer)  
32. 9S-4181 [1] PLUG (R.H. HOUSING)  
  7M-8485 [1] SEAL  
  7D-7761 [1] ADAPTER (L.H. HOUSING)  
  3H-4987 [1] GASKET  
33. 6D-5512 [4] SEAL (Plastic)  
34. 7D-2651 [4] PISTON ASSEM.  
35. 6D-4581 [4] BEARING  
    (1 in each 7D2651 Assem.)
36. 7D-2644 [4] SHAFT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0029S0279
 

6J-6499: POWER CONTROL VALVE GROUP

6J6499 POWER CONTROL VALVE GROUP--R.H.
Serial No. 72G1 to 72G561 inclusive. Part of Power Control shown
on Pages 102C, 102G & 104A. 6J6501 Valve parts are shown on Page 106C
c111281 UEG0029S
6J6499 POWER CONTROL VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-6501 Y [1] VALVE GROUP  
    (See Separate Illustration)
  7J-0383 [1] BODY GROUP  
2. [1] BODY  
3. [2] STEM ASSEM.  
4. 5J-7288 [1] PLATE  
5. 5J-7287 [1] LOCK  
6. 0S-1617 [3] BOLT  
7. 4F-4893 [2] SPRING  
8. 6J-2366 [8] RETAINER  
9. 6J-0923 [1] LOCK  
10. 1B-7182 [3] BOLT  
11. 6J-0922 [1] COVER  
12. 6D-4537 [1] COVER  
13. 3J-2493 [1] PLUG ASSEM.  
14. 3K-0360 [1] SEAL  
    (Part of 3J2493 Assem.)
  Y   SEPARATE ILLUSTRATION
 

Information:

Service Magazine
Different Seal For Control Shaft In Power Control Box{5201}
1980/01/28

Caterpillar Parts SIS Catalog 14E :

POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
POWER CONTROL
CLUTCH CONVERSION GROUP
8D-0440 CLUTCH CONVERSION GROUP
POWER CONTROL
6D-6840 POWER CONTROL
6D-6840 POWER CONTROL
6D-6840 POWER CONTROL
6D-6840 POWER CONTROL
POWER CONTROL
7D-2660 POWER CONTROL
7D-2660 POWER CONTROL
7D-2660 POWER CONTROL
7D-2660 POWER CONTROL

Truck sale:

Caterpillar 14E
 
Caterpillar 14E
- motor graders
NMC
Caterpillar 314E STL, Crawler Excavators, Construction
104,500 
Caterpillar 314E STL, Crawler Excavators, Construction
- Crawler Excavators
HOLT OF CALIFORNIA
Caterpillar 314E, Crawler Excavators, Construction
80,003 
Caterpillar 314E, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
128,589 
Caterpillar 314E, Crawler Excavators, Construction


 
165,000 
Caterpillar 314EL, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.