AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N5059 CONTROLET AS Part Of 7N9923 Governor G399 GAS ENGINE


FUEL SYSTEM
GOVERNOR GP
REGULATOR GP-GAS PRESSURE
CARBURETOR GP
GOVERNOR GP

GAS ENGINE G399 GAS ENGINE 49C
 G399 ENGINE 49C00261-UP UEG0605S G399 49C   (1968)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
DRIVE GP
5N-4415 DRIVE GP
SUPPORT AS-ENGINE
8N-5059 SUPPORT AS-ENGINE
WOODWARD GOVERNOR GROUP
2N-6958 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
3N-4113 WOODWARD GOVERNOR GROUP
GOVERNOR GP-WOODWARD
6N-3603 GOVERNOR GP-WOODWARD
 

#UEG0605S0750
 

8N-5059: SUPPORT AS-ENGINE

8N5059 CONTROLET AS
Part Of 7N9923 Governor
c234518 UEG0605S
8N5059 SUPPORT AS-ENGINE Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5121 [1] PISTON ASSEM.  
2. 9F-9597 [1] GEAR (17 teeth)  
3. 8N-5120 [1] SPRING  
4. 9F-9596 [1] DRIVE ASSEM.  
5. 5H-6500 [1] LEVER ASSEM.  
    (Includes)
6. 2N-1922 [1] PIN  
  2F-6713 [1] COTTER PIN  
  4F-2317 [1] WASHER  
7. [1] SPRING  
8. 5H-6503 [1] LEVER  
9. 8N-5122 [1] CONTROLET ASSEM.  
    (Includes)
10. 2F-6707 [2] VALVE ASSEM.  
11. 9F-9630 [4] RING  
12. 2F-6818 [2] PISTON  
13. [2] SPRING  
14. 3L-6746 [1] SEAT  
15. 8N-5124 [1] CONTROLET  
  9F-9635 [1] WASHER  
16. 9F-2247 [4] PLUG  
 

#UEG0605S0751
 

3N-6677: REGULATOR GP-GAS PRESSURE

3N6677 GAS PRESSURE REGULATOR GROUP-DUAL FUEL-PART 1 of 2
6L4104 Regulator Parts Are Shown On Page 24
c335496 UEG0605S
3N6677 REGULATOR GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-0498 [1] ELBOW  
2. 5P-1201 H TUBE 11.36 cm(44.71 in.)  
3. 5B-7666 [1] ELBOW  
4. 5B-9405 [1] NIPPLE  
5. 6L-7028 [1] JOINT ASSEM.  
    (Includes)
  3N-2724 [2] SEAL  
6. 3N-6660 [1] PIPE  
7. 1L-2782 [1] TEE  
8. 5B-7642 [2] NIPPLE  
9. 6L-4104 Y [1] REGULATOR ASSEM.  
    (Separate Illustration)
10. 1H-5403 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
11. 3N-6662 [1] SUPPORT  
12. 3N-4630 [1] REGULATOR  
13. 7L-3111 [1] GASKET  
14. 6B-1628 [2] BUSHING  
15. 5K-9244 [4] ELBOW  
16. 0S-1591 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
17. 6L-4382 [1] ELBOW  
18. 4B-4609 [1] NIPPLE  
19. 6L-6115 [1] VALVE  
20. 7B-3603 [1] PIPE  
21. 7L-4224 [1] JOINT ASSEM.  
    (Includes)
  3N-2723 [2] SEAL  
22. 7B-3625 [1] PIPE  
23. 3K-0846 [4] NUT  
24. 1F-3605 [1] BUSHING  
25. 5P-1201 H TUBE 10.73 cm(42.23 in.)  
26. 6F-7694 [4] COCK  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0605S0752
 

3N-6677: REGULATOR GP-GAS PRESSURE

3N6677 GAS PRESSURE REGULATOR GROUP-DUAL FUEL-PART 2 of 2
6L4104 Regulator Parts Are Shown On Page 24
c335504 UEG0605S
3N6677 REGULATOR GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9244 [3] ELBOW  
2. 3K-0846 [4] NUT  
3. 5P-1201 H TUBE 85.24 cm(33.56 in)  
4. 5B-7666 [1] ELBOW  
5. 7L-6405 [1] NIPPLE  
6. 6L-7028 [1] JOINT ASSEM.  
    (Includes)
  3N-2724 [2] SEAL  
7. 7L-4132 [1] PIPE  
8. 1L-2782 [1] TEE  
9. 5B-7661 [1] NIPPLE  
10. 6L-4104 Y [1] REGULATOR ASSEM.  
    (Separate Illustration)
11. [8] BOLT  
  3B-4505 [8] LOCKWASHER  
12. 4B-4609 [1] NIPPLE  
13. 9F-4513 [1] PIPE  
14. 3N-4630 [1] REGULATOR  
15. 7L-3111 [1] GASKET  
16. 0S-1588 [4] BOLT  
17. 3B-4506 [8] LOCKWASHER  
18. 2N-1101 [1] SUPPORT  
19. 6B-1628 [2] BUSHING  
20. 6L-4382 [1] ELBOW  
21. 6L-6115 [2] VALVE  
22. 0S-1591 [4] BOLT  
  0S-2185 [4] SPACER  
23. 5L-6600 [1] SUPPORT  
24. 7B-3603 [1] PIPE  
25. 7L-4224 [1] JOINT ASSEM.  
    (Includes)
  3N-2723 [2] SEAL  
26. 2N-9074 [1] NIPPLE  
27. 1F-3605 [1] BUSHING  
28. 5P-1201 H TUBE 12.73 cm(50.12 in.)  
29. 7K-0498 [1] ELBOW  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0605S0753
 

2N-1359: CARBURETOR AS

2N1359 CARBURETOR AS
S/N 49C315-Up
For Use With Digester Gas With 550 To 650 Btu Ratings
c461681 UEG0605S
2N1359 CARBURETOR AS Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5283 [3] COVER  
2. 7H-3171 [1] PLUG-PIPE  
3. 6L-5281 [3] SPRING-AIR VALVE  
4. 4N-9173 [3] DIAPHRAGM AS  
    (EACH INCLUDES)
  3N-3994 [1] DIAPHRAGM  
5. 4N-9171 [1] BODY AS-CARBURETOR  
6. 8L-4302 [1] THROTTLE AS  
7. 8L-4470 [1] LEVER AS-STOP  
8. 8L-4300 [1] SHAFT-THROTTLE  
9. 8L-4299 [1] DISC-THROTTLE  
10. 6L-5296 [1] SCREW-PIN  
11. 6L-5284 [1] LEVER AS  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  8L-4297 [1] KIT-BEARING  
    (INCLUDES BEARINGS,
    RETAINERS, AND SEALS)
  8L-4295 [1] KIT-HARDWARE  
    (INCLUDES BOLT ASSEMBLIES
    AND SCREW ASSEMBLIES)
  8L-4296 [1] KIT-GASKET  
    (INCLUDES 3 GASKETS)
  [1] KIT-BEARING  
 

#UEG0605S0754
 

2N-5860: CARBURETOR CONTROL GROUP

2N5860 CARBURETOR CONTROL GROUP--Type 1
Also part of 2N7097 and 3N4375 Woodward Governor Conversion Arrangement listed on Pages 108 and 108A
c134053 UEG0605S
2N5860 CARBURETOR CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [3] BOLT  
2. [8] BOLT  
  [8] WASHER  
3. [16] NUT  
  [16] LOCKWASHER  
4. [4] BOLT  
5. [6] NUT  
  [6] LOCKWASHER  
6. [1] LEVER  
7. [6] ROD END  
8. [6] NUT  
9. [1] ROD  
10. [1] CHANNEL ASSEM.  
11. [1] BRACKET ASSEM.  
12. [2] LEVER  
13. [1] ROD  
14. [2] BOLT  
15. [8] BOLT  
16. [2] BEARING  
17. [1] SHAFT ASSEM.  
18. [1] BRACKET ASSEM.  
19. [1] ROD  
20. [4] BOLT  
  [4] LOCKWASHER  
  [4] WASHER  
 

#UEG0605S0755
 

2N-5860: CARBURETOR CONTROL GROUP

2N5860 CARBURETOR CONTROL GROUP--Type 2
Also part of 2N7097 and 3N4375 Arrangements listed on Pages 108 and 108A
c167895 UEG0605S
2N5860 CARBURETOR CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [3] BOLT  
2. 0L-1143 [8] BOLT 6.35 cm(2.5 in.) long  
    -OR-
  0T-0573 C [8] BOLT 6.99 cm(2.75 in.) long  
3. 1D-4717 [16] NUT  
  3B-4506 [16] LOCKWASHER  
4. 9F-6580 [4] BOLT  
5. 1B-4330 [6] NUT  
  3B-4504 [6] LOCKWASHER  
6. 2N-5817 [1] LEVER  
7. 6L-3353 C [5] ROD END  
8. 1A-8285 C [5] NUT  
9. 2N-5938 [1] ROD  
10. 2N-5852 [1] CHANNEL ASSEM.  
11. 5L-8464 [1] BRACKET ASSEM.  
12. 3N-9274 C [2] LEVER  
13. 6L-4889 C [1] ROD  
14. 0S-1616 [2] BOLT 2.54 cm(1 in.) long  
    -OR-
  9F-6580 [2] BOLT 2.86 cm(1.125 in.) long  
15. 0S-1588 [8] BOLT  
16. 5L-3291 [2] BEARING  
17. 3N-9286 C [1] SHAFT ASSEM.  
18. 5L-8463 [1] BRACKET ASSEM.  
19. 3N-9300 C [1] ROD  
20. 1D-4538 [4] BOLT  
  3B-4505 C [4] LOCKWASHER  
  9N-0869 C [4] WASHER  
21. 3N-9302 C [1] ROD END  
22. 8L-4496 C [1] NUT  
23. 4B-4278 [8] WASHER  
24. 1B-8701 C [2] KEY  
25. 3H-4656 C [4] SPACER  
  C   INDICATES CHANGE
 

#UEG0605S0756
 

5N-2422: CONTROL GP-CARBURETOR

5N2422 CARBURETOR CONTROL GROUP
c345805 UEG0605S
5N2422 CONTROL GP-CARBURETOR Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 C [2] BOLT  
2. 0T-0573 [8] BOLT  
  4B-4278 C [16] WASHER 1.5MM(.059IN.)THK.  
3. 1D-4717 [16] NUT  
  5M-2894 C [24] WASHER 2.5MM(.098IN.)THK.  
4. 9F-6580 C [5] BOLT  
5. 2D-6235 C [6] LOCKNUT  
  5P-0537 C [6] WASHER  
6. 7N-8114 [1] LEVER-GOVERNOR CONTROL  
7. 6L-3353 [5] ROD END-BEARING  
8. 1A-8285 [5] NUT-JAM  
9. 2N-5938 [1] ROD  
10. 2N-5852 [1] CHANNEL AS  
11. 5L-8464 [1] BRACKET AS-SHAFT  
12. 3N-9274 [2] LEVER  
13. 3N-9300 [1] ROD-CARBURETOR CONTROL  
14. 3H-4656 [4] SPACER  
15. 0S-1588 [8] BOLT  
16. 5L-3291 [2] BALL BEARING AS  
17. 3N-9286 [1] SHAFT AS-CONTROL  
18. 5L-8463 [1] BRACKET AS-SHAFT  
19. 6L-4889 [1] ROD  
20. 1D-4538 [4] BOLT  
  9M-1974 C [4] WASHER (SMALL)  
  9N-0869 [4] WASHER (LARGE)  
21. 3N-9302 [1] ROD END-BEARING  
22. 8L-4496 [1] NUT-JAM  
23. 1B-8701 [2] KEY-WOODRUFF  
24. 8B-5084 C [8] SPACER  
25. 7B-2742 C [1] BOLT  
  7B-5934 C [1] COLLAR  
26. 0S-1618 C [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0605S0757
 

2N-6958: WOODWARD GOVERNOR GROUP

2N6958 WOODWARD GOVERNOR GROUP
Serial No. 49C261 to 49C308 inclusive. Part of 2N7097 Woodward Governor Conversion
Arrangement listed on Page 108. 8L8919 Governor parts are shown on Page 111
c136907 UEG0605S
2N6958 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8919 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
2. 1N-8289 [1] GEAR (53 Teeth)  
3. 0L-2070 [4] BOLT  
4. 3L-3911 [1] SWITCH (Toggle)  
5. 3L-4576 [1] PLATE (Name)  
6. 6L-3401 [1] GASKET  
7. 1B-4441 [1] NUT  
8. 1D-5965 [1] WASHER  
9. 3B-4618 [1] COTTER PIN  
10. 2N-0575 [3] KEY  
11. 1N-8290 [1] GEAR (33 Teeth)  
12. 6L-3458 [1] GASKET  
13. 9M-6819 [1] COVER  
14. 0S-1615 [2] BOLT  
15. 4B-4276 [2] WASHER  
16. 1A-2029 [6] BOLT  
17. 3B-4506 [10] LOCKWASHER  
18. 7L-8682 [1] GASKET  
19. 2N-0576 [1] SHAFT  
20. 8L-6294 [1] WASHER  
21. 4S-6517 [2] PLUG  
22. 2S-1418 [1] WASHER  
23. 5L-4804 [1] SLEEVE ASSEM.  
  5B-4689 [1] PIN  
24. 5M-6214 [3] PLUG  
25. 7L-2876 [1] HOUSING ASSEM.  
26. 7H-3639 [1] PIN  
27. 8M-7753 [1] BEARING  
28. 6L-2142 [2] BUSHING  
29. 2F-4547 [2] DOWEL  
30. 7L-2873 [1] PILOT PLATE  
  [1] WIRING DIAGRAM  
  Y   SEPARATE ILLUSTRATION
 

#UEG0605S0758
 

3N-4113: WOODWARD GOVERNOR GROUP

3N4113 WOODWARD GOVERNOR GROUP
Serial No. 49C309-Up. Part of 3N4375 Woodward Governor Arrangement listed on Page 108A
8L8919 Governor parts are shown on Page 111
c146484 UEG0605S
3N4113 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8919 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
2. 3N-4059 [1] GEAR (36 teeth)  
3. 0L-2070 [4] BOLT  
4. 3L-3911 [1] SWITCH (toggle)  
5. 3L-4576 [1] PLATE (name)  
6. 6L-3401 [1] GASKET  
7. 2N-8611 [2] RING  
8. 5M-6214 [3] PLUG  
9. 1N-9990 [1] SHAFT  
10. 1N-9994 [1] COUPLING  
11. 1N-8423 [1] GEAR (36 teeth)  
12. 6L-3458 [1] GASKET  
13. 9M-6819 [1] COVER  
14. 0S-1615 [2] BOLT  
15. 4B-4276 [2] WASHER  
16. 1A-2029 [6] BOLT  
17. 3B-4506 [10] LOCKWASHER  
18. 7L-8682 [1] GASKET  
19. 3N-4057 [1] SHAFT  
20. 2N-8613 [2] WASHER  
21. 4S-6517 [2] PLUG  
22. 3N-4061 [1] HOUSING ASSEM.  
    (Includes)
23. 1B-7182 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
24. 4N-4322 [1] PLATE  
  4N-4321 [1] GASKET  
25. 5J-7389 [1] PLUG  
26. 7H-3639 [1] PIN  
27. 8M-7753 [1] BEARING  
28. 6L-2142 [2] BUSHING  
29. 2F-4547 [3] DOWEL  
30. 5M-6214 [1] PLUG  
31. 5M-6213 [1] PLUG  
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#UEG0605S0759
 

6N-3603: GOVERNOR GP-WOODWARD

6N3603 GOVERNOR GP--WOODWARD--PART 1 OF 2
S/N 49C309-Up
Part Of 3N9131 Governor
c157770 UEG0605S
6N3603 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your G399 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-2884 [1] SPRING ASSEM.  
2. 5N-2889 [1] ROD ASSEM.  
    (Includes)
3. 5N-2888 [1] NUT  
  3B-4605 [1] COTTER PIN  
4. 2F-6686 [1] BEARING  
5. 2F-6689 [1] SPRING  
6. 5N-2890 [1] ROD AND PIN ASSEM.  
7. 3L-6745 H [1] CONTROLET ASSEM.  
    (Includes)
8. 8F-9914 [1] CONTROLET  
9. 2F-6707 [2] VALVE ASSEM.  
  2F-6818 [2] PISTON  
  9F-9635 [2] SEAT  
  9F-9630 [4] RING  
  2F-6802 [2] SPRING  
10. 3H-8275 [4] PLUG  
11. 3L-6746 [1] SEAT  
12. 6L-4249 [1] BASE ASSEM.  
    (Includes)
13. 2F-6674 [1] SHAFT  
14. 5N-2881 [1] CASE ASSEM.  
  3L-2401 [1] GAUGE  
  3L-2402 [1] FITTING  
15. 5N-2897 [1] PANEL ASSEM.  
16. 3N-3685 [1] BALLHEAD ASSEM.  
17. 5N-2880 [1] PLATE  
18. 1D-4716 [2] NUT  
19. 5N-2882 [2] SETSCREW  
  5N-2907 [1] CONTROLET ASSEM.  
    (CONSISTS of PARTS MARKED H-SHOWN IN BOTH PART 1 AND PART
 

Information:

Engine News
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Governor Drive Gears And Weight Assemblies
1983/09/14
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Increased Preload Used In Air Shutoff Actuators
1985/03/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Specifications
Governor
6.25" BORE ENGINE ATTACHMENTS
Governor Drive Upper Housing<BR> (Woodward Governor)
6.25" BORE ENGINE ATTACHMENTS
Governor Air Actuators<BR> (2N6006, 1N9318, 7L135)
6.25" BORE ENGINE ATTACHMENTS
Shut-Off Solenoids
6.25" BORE ENGINE ATTACHMENTS
Linkage For Governor Control (Hydra-Mechanical)
G379, G398 & G399 ENGINES
Governor
G379, G398 & G399 ENGINES
Governor Drive
G379, G398 & G399 ENGINES
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Disassembly and Assembly
2N6006 Governor Air Actuator
6.25" BORE ENGINE ATTACHMENTS
1N9318 &amp; 7L135 Governor Air Actuators
6.25" BORE ENGINE ATTACHMENTS
Governor (Woodward Ug-8)
G379, G398 & G399 ENGINES
Governor Drive Housing (Upper) (Woodward Ug-8)
G379, G398 & G399 ENGINES
Governor (Woodward UG-8)
G379, G398 & G399 ENGINES
Governor (Hydra-Mechanical)
G379, G398 & G399 ENGINES
Governor Drive Housing
G379, G398 & G399 ENGINES
Service Magazine
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump{1256,1206}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11

Caterpillar Parts SIS Catalog G399 :

SWITCH GP-SINGLE MAGNETIC
4W-4752 SWITCH GP-SINGLE MAGNETIC
SWITCH GP
7N-4196 SWITCH GP
SWITCH GP
7N-4196 SWITCH GP
SWITCH GP
7N-4196 SWITCH GP
DRIVE GP
5N-4415 DRIVE GP
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
REGULATOR GP-GAS PRESSURE
3N-6677 REGULATOR GP-GAS PRESSURE
REGULATOR GP-GAS PRESSURE
3N-6677 REGULATOR GP-GAS PRESSURE
CARBURETOR AS
2N-1359 CARBURETOR AS
CARBURETOR CONTROL GROUP
2N-5860 CARBURETOR CONTROL GROUP
CARBURETOR CONTROL GROUP
2N-5860 CARBURETOR CONTROL GROUP
CONTROL GP-CARBURETOR
5N-2422 CONTROL GP-CARBURETOR
WOODWARD GOVERNOR GROUP
2N-6958 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
3N-4113 WOODWARD GOVERNOR GROUP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.