AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

GOVERNOR TORQUE SPRING (8S5549 N/S) 950 WHEEL LOADER


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
LINES GP-FUEL
LINES GP-FUEL INJECTION
TANK GP-FUEL
LUBRICATION SYSTEM
FUMES DISPOSAL GP
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

WHEEL LOADER 950 WHEEL LOADER 49U
 950 TREE HARVESTER 49U00001-00237 (MACHINE) UEG0625S 950 49U   (1972)

FUEL SYSTEM

GOVERNOR GP
FUEL PUMP HOUSING AND GOVERNOR
8S-0720 FUEL PUMP HOUSING AND GOVERNOR
GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
GOVERNOR TORQUE SPRING
8S-5549 GOVERNOR TORQUE SPRING
 

#UEG0625S0020
 

8S-5549: GOVERNOR TORQUE SPRING

GOVERNOR TORQUE SPRING (8S5549 N/S)
c136013 UEG0625S
8S5549 GOVERNOR TORQUE SPRING Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-6292 [1] LOCK  
2. 8M-9062 [1] RETAINER  
3. 1P-6452 [1] INSULATOR  
4. 9L-5176 [1] SPRING (.024" Thick)  
5. 1P-6453 [1] BAR  
6. 4F-7957 [2] BOLT  
7. 2S-9524 [1] SPACER (.010" Thick)  
  9L-9347 [1] SHIM (.020" Thick)  
8. 8S-4317 [1] CONTACT  
 

#UEG0625S0021
 

5S-2100: FUEL PRIMING PUMP

FUEL PRIMING PUMP (5S2100 N/S)
c145932 UEG0625S
5S2100 FUEL PRIMING PUMP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-2256 Y [1] PUMP ASSEM.  
    (Separate Illustration)
2. 8S-0210 [1] TUBE (8.98 in. long)  
3. 3B-8998 [3] FITTING  
    (Each Includes)
4. 1F-1344 [1] NUT  
5. 1H-7922 [1] FITTING  
    (Includes)
6. 1F-1344 [1] NUT  
7. 8S-0211 [1] TUBE (17.19 in. long)  
8. 2B-2695 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
9. 7S-0644 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#UEG0625S0022
 

9H-2256: PUMP ASSEMBLY

9H2256 PUMP ASSEMBLY
Part of Fuel Priming Pump
c147588 UEG0625S
9H2256 PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-6718 [ 2] BALL  
2. 1H-1023 [ 2] SEAL  
3. 1M-6781 [ 2] NUT  
 

#UEG0625S0023
 

7S-5445: FUEL TRANSFER PUMP GROUP

7S5445 FUEL TRANSFER PUMP GROUP (7S5108 N/S)
c103279 UEG0625S
7S5445 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth)  
3. 6J-2419 [2] SEAL  
4. 7S-4439 [1] RING  
5. 7S-4434 [1] BODY ASSEM.  
6. 8F-6058 [1] BEARING  
7. 2S-6838 [1] SHAFT  
    (Parts of 7S4434 Body Assem.)
8. 8S-4368 [1] GEAR (Idler-10 Teeth)  
9. 8S-5986 [1] COVER ASSEM.  
10. 8S-5575 [1] SEAL  
11. 7S-4433 [2] FERRULE  
    (Parts of 8S5986 Cover Assem.)
12. 7S-6701 [2] SCREW  
13. 8S-4373 [1] SHAFT ASSEM.  
14. [1] GEAR (Idler-10 Teeth)  
    (Part of 8S4373 Shaft Assem.)
15. 9F-6641 [4] SCREW  
16. 4B-3388 H [2] BOLT  
17. 3B-4505 H [2] LOCKWASHER  
18. 7S-2374 [1] GASKET  
19. 8S-4375 [1] CAGE ASSEM.  
20. 8F-6058 [1] BEARING  
21. 4S-7756 [2] SEAL  
    (Parts of 8S4375 Cage Assem.)
22. 3H-1489 [1] KEY  
  H   NOT PART OF 7S5445 TRANSFER PU
 

#UEG0625S0024
 

9K-2717: FUEL LINES

FUEL LINES (9K2717 N/S)
c115750 UEG0625S
9K2717 FUEL LINES Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TUBE  
2. [2] FITTING  
  [1] NUT  
3. [2] NUT  
  [2] LOCKWASHER  
  [2] WASHER  
4. [2] CLIP  
5. [4] GROMMET  
6. [1] TUBE  
7. [1] FITTING  
  [1] NUT  
8. [1] FITTING  
  [1] NUT  
 

#UEG0625S0025
 

5S-7247: FUEL INJECTION LINES

FUEL INJECTION LINES (5S7247 N/S)
c114496 UEG0625S
5S7247 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LINE ASSEM. (No. 4)  
2. [1] LINE ASSEM. (No. 3)  
3. [1] LINE ASSEM. (No. 2)  
4. [1] LINE ASSEM. (No. 1)  
5. [4] NUT  
6. [4] BODY  
7. [4] VALVE SERVICE GROUP  
8. [1] SEAL ASSEM.  
9. [1] SEAL  
10. [1] FITTING  
11. [1] CLIP  
12. [1] TUBE  
13. [1] BOLT (1.125" long)  
14. [3] LOCKWASHER  
15. [2] SEAL  
16. C [1] BOLT (1" long)  
17. C [1] BRACKET  
18. [1] SEAL  
19. C [1] BOLT (3.75" long)  
  [1] LOCKWASHER  
20. [1] BOLT (1.75" long)  
21. [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0625S0026
 

9K-4920: FUEL TANK

FUEL TANK (9K4920 N/S)--53 U.S. Gallons
c115752 UEG0625S
9K4920 FUEL TANK Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1595 [8] BOLT  
2. 1D-4719 [6] NUT  
3. 3B-4508 [12] LOCKWASHER  
4. 6K-2998 [1] HANDRAIL ASSEM.  
5. 1J-6199 [1] COVER  
6. 1A-2029 [1] BOLT  
7. 3B-4506 [5] LOCKWASHER  
  5M-2894 [5] WASHER  
8. 4B-5441 [1] CAP ASSEM.  
9. 3H-8389 [1] BOLT  
10. 4B-5423 [1] GASKET  
11. 2A-1763 [1] GASKET  
12. 7B-2002 [1] WASHER  
13. 3F-4134 [1] BAFFLE  
14. 4B-5949 [2] ELEMENT  
15. 5K-2085 [1] PLUNGER  
16. 8H-3498 [1] STRAINER ASSEM.  
17. 8H-3497 [1] RING  
18. 5K-1785 [1] STEP ASSEM.  
19. 4B-4280 [10] WASHER  
20. 0S-1589 [6] BOLT  
21. 3B-4510 [6] LOCKWASHER  
22. 4B-5275 [2] WASHER  
23. 0S-1585 [4] BOLT  
24. 0L-1351 [4] BOLT  
25. 6K-3214 [1] HANDRAIL  
26. 9K-4925 [1] TANK ASSEM.  
27. 1F-0748 [6] NUT (Weld)  
28. 9F-2978 [2] NUT (Weld)  
29. 2B-7409 [1] PLUG  
30. 1F-2417 [1] BOSS  
31. 4B-6221 [1] LUG  
 

#UEG0625S0027
 

1P-8678: CAP GP-PROTECTION

1P8678 PROTECTION COVER GROUP--Fuel Tank Cap
Also part of 9K3279 Vandalism Protection Arrangement listed on Page 200
AN ATTACHMENT
c111574 UEG0625S
1P8678 CAP GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PADLOCK  
  8M-0439 H [2] KEY (Not Shown)  
2. 5S-7657 [1] FILTER  
3. 2A-1763 [1] GASKET  
4. 4J-1105 [2] SHIM  
5. 3B-4605 [2] COTTER PIN  
6. 5F-9144 [1] SEAL  
7. 1P-8680 [1] CAP  
8. 5S-7646 [1] LID  
9. 1P-8050 [1] COVER ASSEM.  
  1P-8052 [1] RETAINER  
10. 1P-8679 [1] PIN  
11. 8F-9538 [1] SEAL  
  H   NOT PART OF 1P8678 CAP GROUP
 

#UEG0625S0028
 

5S-6437: BREATHER AND FUMES DISPOSAL

BREATHER AND FUMES DISPOSAL (5S6437 N/S)
c112287 UEG0625S
5S6437 BREATHER AND FUMES DISPOSAL Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-0782 [1] TUBE ASSEM.  
2. 9M-2904 [2] CLAMP  
3. 8S-0780 [1] HOSE  
4. 3H-3243 [1] BOLT  
  4K-9890 [1] WASHER  
5. 8S-3193 [1] NUT  
6. 6L-5359 [1] SEAL  
7. 8S-0248 [1] BREATHER ASSEM.  
8. 1D-4716 [1] NUT  
  3B-4505 [1] LOCKWASHER  
 

#UEG0625S0029
 

1P-6928: OIL LINES

OIL LINES (1P6928 N/S)
c114493 UEG0625S
1P6928 OIL LINES Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TUBE ASSEM. (Oil Supply)  
2. [2] BOLT  
  [2] LOCKWASHER  
3. [1] GASKET  
4. [1] GASKET  
5. [2] BOLT  
6. [11] LOCKWASHER  
7. C [1] TUBE ASSEM. (Oil Drain)  
8. [1] CLIP  
9. [2] BOLT  
10. [1] GASKET  
11. C [1] ELBOW  
12. [3] BOLT  
13. [1] GASKET  
14. [3] SEAL  
15. [1] TUBE ASSEM. (Oil Drain)  
16. [3] BOLT  
17. [1] WASHER  
18. [1] CLIP (Tab)  
  [1] CLIP (Slot)  
19. [1] TUBE ASSEM. (Oil Supply)  
20. [1] BOLT  
21. [1] GASKET  
22. [1] GASKET  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 950 :

GOVERNOR CONTROL
6K-3790 GOVERNOR CONTROL
FUEL PUMP HOUSING GROUP
7S-8831 FUEL PUMP HOUSING GROUP
7S-9333 GOVERNOR GROUP
GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
FUEL PUMP HOUSING AND GOVERNOR
8S-0720 FUEL PUMP HOUSING AND GOVERNOR
FUEL FILTER
5S-9665 FUEL FILTER
ACCESSORY DRIVE AND PRIMARY FUEL FILTER
5S-8056 ACCESSORY DRIVE AND PRIMARY FUEL FILTER
PISTON & ROD GP
9S-8912 PISTON & ROD GP
FUEL PRIMING PUMP
5S-2100 FUEL PRIMING PUMP
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
FUEL TRANSFER PUMP GROUP
7S-5445 FUEL TRANSFER PUMP GROUP
FUEL LINES
9K-2717 FUEL LINES
FUEL INJECTION LINES
5S-7247 FUEL INJECTION LINES
FUEL TANK
9K-4920 FUEL TANK
CAP GP-PROTECTION
1P-8678 CAP GP-PROTECTION
BREATHER AND FUMES DISPOSAL
5S-6437 BREATHER AND FUMES DISPOSAL

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.