AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7D6930 LIGHTING GROUP--24 Volt--Type 1 To provide a rotating amber Warning Light AN ATTACHMENT 120 MOTOR GRADER


ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
POWER TRAIN
CLUTCH GP
OPERATOR STATION
CONTROL GP-TRANSMISSION
POWER TRAIN
TRANSMISSION GP
BRAKING SYSTEM
BRAKE GP
POWER TRAIN
TRANSMISSION GP

MOTOR GRADER 120 MOTOR GRADER 10R
 120 MOTOR GRADER 10R02882-UP (MACHINE) UEG0726S 120 10R   (1969)

ELECTRICAL AND STARTING SYSTEM

LIGHTING GP
LIGHTING GROUP
9D-6740 LIGHTING GROUP
LIGHTING GROUP
9D-6740 LIGHTING GROUP
LIGHTING GROUP
7D-6930 LIGHTING GROUP
LIGHTING GROUP
7D-6930 LIGHTING GROUP
 

#UEG0726S0090
 

7D-6930: LIGHTING GROUP

7D6930 LIGHTING GROUP--24 Volt--Type 1
To provide a rotating amber Warning Light
AN ATTACHMENT
c133416 UEG0726S
7D6930 LIGHTING GROUP Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LAMP GROUP  
  [1] BULB  
  [1] LENS  
  [3] SCREW  
2. [1] TERMINAL  
3. [3] SCREW  
  [3] NUT  
  [3] LOCKWASHER  
4. [5] GROMMET (Use as Required)  
5. [1] WIRE ASSEM.  
6. [2] TERMINAL  
  [2] INSULATOR  
7. [1] WIRE ASSEM.  
8. [1] TERMINAL  
  [1] INSULATOR  
9. [1] TERMINAL  
10. [1] FUSE HOLDER  
  [1] FUSE (6 Amp)  
11. [1] SWITCH  
12. [1] WIRE ASSEM.  
13. [2] TERMINAL  
14. [2] CLIP (Use as Required)  
 

#UEG0726S0091
 

7D-6930: LIGHTING GROUP

7D6930 LIGHTING GROUP--24 Volt--Type 2
To provide a rotating amber Warning Light
AN ATTACHMENT
c169520 UEG0726S
7D6930 LIGHTING GROUP Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-7638 C [1] LAMP GROUP  
  7D-8855 [1] BLUB  
  7D-8783 [1] LENS  
  2S-6218 [3] SCREW  
2. 5P-5610 [1] CONNECTOR  
3. 7D-8866 [3] SCREW  
  4B-2047 [3] NUT  
  9F-8125 [3] LOCKWASHER  
4. 2D-9535 C [5] GROMMET (use as required)  
5. 6D-0372 [1] WIRE ASSEM.  
  5P-5629 H WIRE .367 m(14.44 in.)  
6. 2L-8076 [2] TERMINAL  
7. 7D-8602 [1] WIRE ASSEM.  
  5P-5629 H WIRE .14 m(5.5 in.)  
8. 2L-8076 [1] TERMINAL  
9. 4L-3916 [1] TERMINAL  
10. 4K-5122 [1] FUSE HOLDER  
  8M-0454 [1] FUSE (6 amp)  
11. 3D-5443 [1] SWITCH  
  3D-5442 [1] NUT  
  3D-5441 [1] KNOB  
  9B-7242 [2] SCREW  
12. 5P-5629 CH WIRE 2.28 m(89.76 in.)  
  6N-9587 C [1] CONNECTOR (female)  
13. 5P-4571 C [1] TERMINAL  
14. 8M-2771 [2] CLIP (use as required)  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE USE AS REQU
 

#UEG0726S0092
 

6D-1590: CLUTCH GP-FLYWHEEL

FLYWHEEL CLUTCH (6D1590 N/S)
c140640 UEG0726S
6D1590 CLUTCH GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-0051 [1] PLATE  
  8D-1769 C [1] PLATE  
  4B-4910 [3] SPRING  
  2H-5041 [3] RETAINER  
  4H-2266 [3] PIN  
  3B-4615 [3] COTTER PIN  
  6D-2348 [2] DISC ASSEM.  
  7D-7316 [1] HUB  
  6D-6219 [1] THROWER  
  2H-3526 [1] RING  
  2H-3517 [1] ROLLER ASSEM.  
  6D-5585 [1] SHAFT ASSEM.  
  7M-5130 [1] PIN (Spring)  
    (Part of 6D5585 Assem.)
  7D-8043 C [1] WASHER  
  2H-3548 [1] RING  
  2H-3525 [1] RACE  
  4B-3388 [3] BOLT  
  3D-9769 [3] LOCK  
  2D-9689 [1] RETAINER  
  0S-0509 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  5H-0047 [1] DISC  
  5H-3729 [6] SPRING  
  5H-0058 [6] RETAINER  
  2B-0947 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3D-8843 [1] RETAINER  
  4D-0537 [2] DOWEL  
    (Parts of 5D7140 Assem.)
  6D-2518 [3] SCREW  
  2F-7526 [3] NUT  
  3B-4618 [3] COTTER PIN  
  3H-8272 [3] PIN  
  3B-4629 [3] COTTER PIN  
  5D-7140 [3] LEVER ASSEM.  
  2H-6915 [2] BUSHING  
    (Part of 5D7140 Assem.)
  2D-8212 [1] PLATE ASSEM.  
  2D-8213 [2] STUD  
    (Part of 2D8212 Assem.)
  7D-7289 [1] HUB ASSEM.  
  1H-8037 [1] YOKE  
  2K-4821 C [1] NUT  
  1B-8714 [1] KEY  
  2D-7841 [1] SUPPORT ASSEM.  
  4B-7783 [3] PIN  
    (Part of 2D7841 Assem.)
  2D-1272 [1] CAGE ASSEM.  
  1A-5333 [2] BUTTON  
    (Part of 2D1272 Assem.)
  6D-1601 [2] SPRING  
  1B-4113 [1] BEARING  
  1A-2029 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  5F-2201 [2] SPRING  
  1B-4437 [2] NUT  
  5F-0547 [2] WASHER (.1200" Thick)  
  5F-0548 [2] WASHER (.0950" Thick)  
  3B-4605 [2] COTTER PIN  
  5H-0057 [1] RING  
  C   INDICATES CHANGE
 

#UEG0726S0093
 

5D-3220: GEAR SHIFT

GEAR SHIFT (5D3220 N/S)--Part 1 of 2
c141772 UEG0726S
5D3220 GEAR SHIFT Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1F-9994 [1] PLUG (CORE)  
  6D-2203 [1] PLUNGER  
  4D-2813 [1] SPRING  
  4D-5502 [1] HOUSING  
  4D-5526 [1] GASKET  
  5D-1245 [2] WASHER (.060" THICK)  
  5D-1246 [2] WASHER (.030" THICK)  
  5D-1247 [2] WASHER (.010" THICK)  
  6F-7172 [1] DOWEL  
  4D-5508 [1] SHAFT  
  4D-5509 [1] BOOT  
  4K-4114 [1] SEAL  
  5D-2069 [1] FITTING  
  3D-7911 [2] SEAT  
  4D-4218 [2] RING  
  2F-6088 [2] SEAT  
  5D-3059 [1] FORK  
  5D-1068 [1] BOLT  
  8M-4867 [1] FOOT LOCKWIRE  
  4D-2682 [1] SHAFT  
  2F-5947 [1] BOOT  
  4L-6942 [1] SEAL  
  5D-0976 [1] HOUSING ASSEM.  
  6D-2182 [1] PLUNGER  
  4D-2813 [2] SPRING  
  1F-1006 [1] DOWEL  
  4D-2684 [1] GASKET  
  6D-2192 [1] PLUNGER  
  4B-3938 [1] PLUG (CORE)  
    (PART OF HOUSING ASSEM. 5D976)
  5D-3039 [1] SHAFT  
  3D-7912 [1] ROD  
  1D-4719 [3] NUT  
  3B-4508 [3] LOCKWASHER  
  4B-4280 [3] WASHER  
  4D-2663 [1] BRACKET  
  2D-5898 [1] FITTING  
  2A-1736 [2] HANDLE  
  4D-5822 [2] BOOT  
  3B-8488 [1] FITTING  
  6F-3824 [1] BUSHING  
  4F-2726 [1] GASKET  
  0S-1587 [2] BOLT (1.75" LONG)  
  4B-4280 [2] WASHER  
  1D-4719 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  0S-1588 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4D-4699 [1] ROD  
  2F-6349 [1] BRACKET  
  0S-1593 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
  [1] FITTING  
  3F-7414 [2] BUSHING  
    (PART OF LEVER ASSEM. 2D4776)
  3B-4629 [1] COTTER PIN  
  0S-0107 [1] WASHER  
  0L-1172 [1] SHAFT  
    (PART OF BRACKET ASSEM. 2F6423)
  3B-4618 [1] COTTER PIN  
  5D-0982 [1] COVER  
  1L-6124 [1] SPRING  
  5D-0981 [1] COVER  
  0L-0974 [1] SEAL  
  1A-5592 [1] COVER  
  7D-7204 C [2] PLATE  
  3D-8799 [2] GASKET  
  3B-5822 [1] PIN  
    (PART OF LEVER ASSEM. 5D979)
  5D-0979 [1] LEVER ASSEM.  
  2F-6423 [1] BRACKET ASSEM.  
  2D-4776 [1] LEVER ASSEM.  
  C   INDICATES CHANGE
 

#UEG0726S0094
 

5D-3220: GEAR SHIFT

GEAR SHIFT (5D3220 N/S)--Part 2 of 2
c141284 UEG0726S
5D3220 GEAR SHIFT Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-3284 [2] BOOT  
  3B-4618 [1] COTTER PIN  
  0L-0887 [1] COVER  
  0L-0888 [1] COVER  
  3D-8799 [3] GASKET  
  0S-1588 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  6D-2178 [1] GATE  
  4D-3964 [1] KEY  
  6D-1959 [1] HOUSING  
  0S-1594 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  5H-8848 [1] SEAL  
  6D-2610 [1] ARM  
  6D-2611 [1] ARM  
  1B-8736 [1] KEY  
  8D-5506 C [1] RAIL  
  1B-8736 [1] KEY  
  6D-2609 [1] RAIL  
  5D-0966 [1] FORK  
  5D-1068 [1] BOLT  
  1B-8736 [1] KEY  
  0S-1588 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4D-2699 [1] SPACER  
  5D-0972 [1] GASKET  
  0L-2061 [2] DOWEL  
    (PART OF HOUSING ASSEM. 8D5721)
  0S-1588 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4D-2693 [1] GASKET  
  4D-2691 [1] COVER  
  6D-1038 [3] SPACER  
  0L-1143 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  0L-1045 [1] SPRING  
  0L-0974 [1] SEAL  
  1A-5592 [1] COVER  
  7D-7204 C [2] PLATE  
  7D-3283 [1] LEVER  
  5D-3159 [1] PLATE  
  4D-6287 [2] SHIM  
  0S-1594 [4] BOLT  
  5B-2200 [2] LOCK  
  4D-4684 [1] SHAFT  
  5D-1068 [2] BOLT  
  8M-4867 [2 FEET] LOCKWIRE  
  0S-1588 [1] BOLT  
  4D-4729 [1] LEVER  
  1B-8708 [1] KEY  
  1K-6846 [1] FITTING  
  4D-4683 [1] PIN  
  4D-4731 [1] LEVER  
  1B-8708 [1] KEY  
  4D-5531 [1] BOLT  
  5D-1981 [1] SHIM  
  0S-1591 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  5D-1973 [1] BRACKET ASSEM.  
  1F-2743 [2] BEARING  
    (PART OF BRACKET ASSEM. 5D1973)
  3F-6032 [1] YOKE  
  3F-6030 [1] PIN  
  3F-6029 [1] GUIDE  
  3B-8488 [1] FITTING  
  4F-5776 [1] PIN  
  1B-0581 [2] BOLT  
  1B-4202 [2] NUT  
  5D-4974 [1] COVER  
  5D-4975 [1] GASKET  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1D-4719 [12] NUT  
  3B-4508 [12] LOCKWASHER  
  8D-5721 C [1] HOUSING ASSEM.  
  4D-2692 [1] GASKET  
  4D-2665 [1] GASKET  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4D-2666 [1] COVER  
  5D-0963 [1] FORK  
  5D-1068 [1] BOLT  
  8M-4867 [1 FOOT] LOCKWIRE  
  1B-8736 [1] KEY  
  C   INDICATES CHANGE
 

#UEG0726S0095
 

8D-7630: THIRD AND FOURTH REVERSE GEAR GROUP

8D7630 THIRD AND FOURTH REVERSE GEAR GROUP
Note: With 13.00 x 24 Tires the speeds are: Third--8.5 and Fourth--13.5 M.P.H.
With 14.00 x 24 Tires the speeds are: Third-9.2 and Fourth--14.3 M.P.H.
AN ATTACHMENT
c141288 UEG0726S
8D7630 THIRD AND FOURTH REVERSE GEAR GROUP Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-4630 [1] PLATE (Instruction)  
2. 4D-2153 [1] SPACER  
3. 4D-2159 [1] GEAR (37 Teeth)  
4. 2F-5884 [2] ROLLER ASSEM.  
5. 2F-5910 [1] SLEEVE  
6. 4D-2219 [1] GEAR (28 & 30 Teeth)  
7. 3F-0014 [1] RING  
8. 3F-0019 [1] COLLAR  
9. 4D-2218 [1] GEAR (30 Teeth)  
10. 3F-0011 [1] DOWEL  
11. 5D-1068 [2] BOLT  
12. 4S-8743 H LOCKWIRE 8 in.  
13. 5D-0966 [1] FORK  
14. 1B-8736 [1] KEY  
15. 5D-0973 [1] PLATE  
16. 6D-2176 [1] PLUNGER  
17. 1K-7041 [1] SPRING  
18. 5D-0967 [1] ARM  
19. 8D-4736 [1] RAIL  
20. 4D-2873 [1] SPACER  
21. 4D-2813 [1] SPRING  
22. 6D-2192 [1] PLUNGER  
  H   ORDER BY THE FOOT
 

#UEG0726S0096
 

5D-3200: TRANSMISSION BRAKE

TRANSMISSION BRAKE (5D3200 N/S)
c78829 UEG0726S
5D3200 TRANSMISSION BRAKE Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2F-5894 [1] DRUM  
  5D-3261 [2] SPRING  
  5D-3257 [2] SHOE AND LINING ASSEM.  
  5D-3264 [1] BRAKE LINING KIT  
    (Consists of a complete set of LININGS AND RIVETS FOR ONE WHEEL)
  4D-6767 [1] SHIELD  
  4D-6765 [1] ADAPTER  
  5F-3106 [1] SEAL  
  0S-1620 [1] BOLT  
  3B-4508 [1] LOCKWASHER  
  4D-2148 [1] SLEEVE  
  3B-1250 [1] NUT  
  4B-8383 [1] LOCK  
  5D-3263 [1] CAMSHAFT  
  5D-3262 [1] NUT  
  4B-5059 [1] WASHER  
  4D-6769 [1] LEVER  
  1B-0936 [2] SEAL  
  2B-7557 [1] CORK  
  4D-6766 [4] BOLT  
  7H-7810 [4] NUT  
  4D-1099 [6] NUT  
  4D-6768 [1] SHIELD  
  5D-3259 [1] PLATE ASSEM.  
  5D-3258 [1] STRUT ASSEM.  
 

#UEG0726S0097
 

7D-6210: TRANSMISSION

TRANSMISSION (7D6210 N/S)--Upper Half--Side View--Part 1 of 2
Note: This Transmission provides the following speeds: (Forward) First--2.4, Second--3.7,
Third--5.5, Fourth--8.6, Fifth--12.6, Sixth--20 M.P.H.; (Reverse) Low--4.0, High--6.2 M.P.H.
See Page 21 for Gasket Kits
c140734 UEG0726S
7D6210 TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-0033 [1] SEAL  
  8D-7295 C [1] SHAFT ASSEM.  
  6F-5674 [1] BUSHING  
    (PART OF 8D7295 ASSEM.)
  5H-0034 [1] RING  
  5D-8050 [1] CAGE  
  3F-8283 [1] DOWEL  
  2B-3457 [1] NUT  
  2B-3455 [1] LOCK  
  5D-0302 [1] PLUG  
    (PART OF SHAFT ASSEM 8D589)
  8D-0529 [1] SLEEVE  
  4D-2187 [1] SPACER  
  5M-0704 [1] RACE AND ROLLER ASSEM.  
  3B-8972 [1] RACE (OUTER)  
  5D-0925 [1] GEAR  
    (49 AND 20 TEETH)
  2F-5951 [1] DOWEL  
  5H-1621 [1] ROLLER ASSEM  
  2F-6067 [1] RETAINER  
  4D-2184 [1] SHAFT  
  2F-5959 [1] RACE (INNER)  
  8D-0528 [1] GEAR (20 TEETH)  
  2F-5970 [1] COLLAR  
  8D-0531 [1] SLEEVE  
  5D-0924 [1] GEAR  
    (56 AND 20 TEETH)
  3H-1996 [1] BEARING  
  0S-1591 [5] BOLT  
  4D-6069 [1] LOCK  
  4D-4863 [1] PINION (32 TEETH)  
  5D-8051 [1] COVER  
  7D-7306 [1] PINION (26 TEETH)  
  7D-7969 [1] PINION (19 TEETH)  
  8D-0532 [1] SPACER  
  8D-0499 [1] SPACER  
  8D-0589 [1] SHAFT ASSEM.  
  7D-7359 [1] SPACER  
  4D-2229 [1] CAGE  
  4F-6154 [1] DOWEL  
  2D-6420 [1] RACE (OUTER)  
  7M-1154 [1] RACE AND ROLLER ASSEM  
  4F-2039 [1] LOCK  
  4D-2268 [1] COVER  
  4D-1608 [2] SEAL  
  8B-7207 [1] NUT  
  2F-5945 [1] SPACER  
  6B-9277 [1] GASKET  
  6B-9277 [1] GASKET  
  1D-4717 [6] NUT  
  3B-4506 [6] LOCKWASHER  
  4D-9935 [1] CAGE  
  5F-3106 [1] SEAL  
  4D-2191 [1] RETAINER  
  4D-9934 [1] TRUNNION  
  0S-1604 [2] BOLT  
  7D-0758 [1] LOCK  
  9F-3823 [1] RING  
  4D-2156 [1] BEARING ASSEM  
  4D-2189 [1] SPACER  
  1D-4719 [5] NUT  
  3B-4508 [5] LOCKWASHER  
  4D-9936 [1] GASKET  
  8D-0527 [1] GEAR (28 TEETH)  
  5F-3106 [1] SEAL  
  4D-9099 [1] CAGE  
  4D-2158 [1] COVER  
  0S-1593 [2] BOLT  
  7D-0758 [1] LOCK  
  4D-2146 [1] RETAINER  
  4D-2156 [1] BEARING ASSEM  
  4D-2152 [1] SPACER  
  1D-4717 [5] NUT  
  3B-4506 [5] LOCKWASHER  
  3D-4604 [1] GASKET  
  2F-6050 [1] GEAR (53 TEETH)  
  C   INDICATES CHANGE
 

#UEG0726S0098
 

7D-6210: TRANSMISSION

TRANSMISSION (7D6210 N/S)--Lower Half--Top View--Part 2 of 2
c108983 UEG0726S
7D6210 TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0L-1026 [4] PLUG (CORE)  
  4F-6165 [1] DOWEL  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  4B-8145 [13] SHIM (.010" THICK)  
  1F-4232 [10] SHIM (.003" THICK)  
  2F-6066 [1] RETAINER  
  1B-6573 [1] CUP  
  1B-6572 [1] CONE  
  2D-3607 [1] SPACER  
    (PART OF 2D3608 ASSEM.)
  2D-3608 [1] SHAFT ASSEM.  
  7M-1154 [1] RACE AND ROLLER ASSEM.  
  2D-6420 [1] RACE (OUTER)  
  6D-0722 [1] RACE (OUTER)  
  6D-0723 [1] RACE AND ROLLER ASSEM.  
  2D-6445 [1] WASHER  
  3B-8925 [1] DOWEL  
  6D-0708 [1] PINION (13 TEETH)  
  4B-0966 [10] BOLT  
  5B-0634 [10] NUT  
  5D-0304 [5] LOCK  
  6D-0687 [1] GEAR (32 TEETH)  
  1B-6573 [1] CUP  
  1H-8278 [2] SEAL  
  1B-6572 [1] CONE  
  4D-4488 [2] CAGE  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  4B-8145 [13] SHIM (.010" THICK)  
  1F-4232 [10] SHIM (.003" THICK)  
  4D-2155 [1] RETAINER  
  4D-2147 [1] RING  
  9M-0669 [1] DOWEL  
  4D-2169 [1] GEAR (33 TEETH)  
  5D-3158 [1] SPACER  
  4D-2185 [1] SHAFT (21 TEETH)  
  4D-4188 [1] GEAR  
    (39 AND 30 TEETH)
  3F-0015 [2] SLEEVE  
  3F-0019 [1] COLLAR  
  3F-0018 [1] GEAR (30 TEETH)  
  4H-2029 [1] GEAR  
    (34 AND 30 TEETH)
  3F-0010 [4] ROLLER ASSEM.  
  2D-6445 [1] WASHER  
  4F-2324 [1] SPACER  
  5D-3157 [1] SPACER  
  4D-9099 [1] CAGE  
  4D-2156 [1] BEARING ASSEM.  
  3D-4604 [1] GASKET  
  5F-3106 [1] SEAL  
  5D-3144 [1] COVER  
  4D-2146 [1] RETAINER  
  0S-1593 [2] BOLT  
  7D-0758 [1] LOCK  
  1D-4717 [5] NUT  
  3B-4506 [5] LOCKWASHER  
  3F-0011 [1] DOWEL  
  2F-5864 [10] SHIM (.003" THICK)  
  2F-5865 [16] SHIM (.005" THICK)  
  4D-2198 [1] CAGE  
  4D-2197 [1] SPACER  
  4B-7901 [1] PIN  
  4D-2156 [1] BEARING ASSEM.  
  2F-5883 [2] ROLLER ASSEM.  
  2F-6051 [1] GEAR  
    (24 AND 28 TEETH)
  3F-0014 [1] RING  
  3F-0017 [1] GEAR (28 TEETH)  
  4F-1787 [1] SLEEVE  
  2F-5884 [2] ROLLER ASSEM.  
  2F-5969 [1] COLLAR  
  3D-6672 [1] GEAR  
    (33 AND 28 TEETH)
 

#UEG0726S0099
 

5D-7700: TRANSMISSION CASE AND COVER GROUP

5D7700 TRANSMISSION CASE AND COVER GROUP--Side View--Part 1 of 2
Serial No. 10R2882 to 10R3834 inclusive and 22R980 to 22R1076 inclusive
c138909 UEG0726S
5D7700 TRANSMISSION CASE AND COVER GROUP Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1587 [21] BOLT  
  3B-4508 [21] LOCKWASHER  
  1A-2223 [2] DOWEL  
    (PART OF HOUSING ASSEM. 7D7809)
  2D-8157 [1] GASKET  
  7D-7809 [1] HOUSING ASSEM.  
  4D-6589 [16] STUD  
    (Part of 7D7809 Assem.)
  0S-1595 [12] BOLT  
  3B-4508 [14] LOCKWASHER  
  3D-9142 [1] BREATHER  
  3B-6488 [1] COUPLING  
  2D-8153 [2] STUD  
    (Part of 7D7809 Assem.)
  1D-4719 [2] NUT  
  5H-7598 [1] NIPPLE  
  3B-6553 [1] ELBOW  
  1F-2417 [1] BOSS  
    (Part of 8D722 Assem.)
  0L-0827 [1] PLUG  
  0L-1124 [1] GASKET  
  7B-5875 [1] TUBE  
    (Part of 8D722 Assem.)
  8D-0722 [1] COVER ASSEM.  
  2D-3469 [1] GASKET  
  5H-0438 [1] BOSS  
    (Part of 8D722 Assem.)
  2D-8390 [1] PLUG  
  6F-4868 [1] GASKET  
  4D-3145 [1] GASKET  
  3D-0490 [3] STUD  
    (PART OF HOUSING ASSEM. 7D7809)
  3D-0490 [12] STUD  
    (PART OF HOUSING ASSEM. 7D7809)
 

Information:

Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Of 6T8941 Rotating Warning Lamp Group{7328}
Installation Of 6T8941 Rotating Warning Lamp Group{7328}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Service Magazine
Caterpillar Electric Starting Motors{1453,1407}
1982/03/22
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Cab Head Lamps Mounted In New Location For Better Protection{7309}
1983/10/10
Improved Rotating Warning Lamp Group Available{7328}
1985/03/25
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29

Caterpillar Parts SIS Catalog 120 :

LIGHTING GROUP
9D-6740 LIGHTING GROUP
LIGHTING GROUP
9D-6740 LIGHTING GROUP
LIGHTING GROUP
9D-6750 LIGHTING GROUP
9D-4630 CLUTCH DISC GROUP
LAMP GROUP
7D-8565 LAMP GROUP
LIGHTING GROUP
7D-8670 LIGHTING GROUP
BASIC LAMP GROUP
7D-8089 BASIC LAMP GROUP
BASIC SWITCH GROUP
7D-8086 BASIC SWITCH GROUP
LIGHTING GROUP
7D-6930 LIGHTING GROUP
CLUTCH GP-FLYWHEEL
6D-1590 CLUTCH GP-FLYWHEEL
GEAR SHIFT
5D-3220 GEAR SHIFT
5D-3220 GEAR SHIFT
THIRD AND FOURTH REVERSE GEAR GROUP
8D-7630 THIRD AND FOURTH REVERSE GEAR GROUP
TRANSMISSION BRAKE
5D-3200 TRANSMISSION BRAKE
TRANSMISSION
7D-6210 TRANSMISSION
7D-6210 TRANSMISSION

Truck sale:

Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
Caterpillar 120, motor graders, Construction
278,720 
Caterpillar 120, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
 
 
Caterpillar LIFT TRUCKS EJE120E, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.