VALVE GP-LOAD CONTROL 2705696 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00671923
Typical Example
Remove two bolts (1) from each end of oil drain tube (3). Remove oil drain tube (3) .
Remove tube (4) .
Remove four bolts (2) .
Illustration 2 g00672021
Loosen clamp (7) and remove hose (8).
Remove the bolt and washer (5) .
Remove the tube (6) .
Illustration 3 g00672054
Remove air inlet tube (12) .
Remove four nuts (9) .
Illustration 4 g00671930
Typical Example
Attach a suitable lifting device (11) to the turbocharger (10) and remove turbocharger (10) from the engine. The weight of the turbocharger is approximately 23 kg (51 lb).