6C9047 WASHER Caterpillar parts
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322 FM L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B, D6K, D6K LGP, D6K XL...
Rating:
Alternative (cross code) number:
CA6C9047
6C-9047
6C9047
CA6C9047
6C-9047
6C9047
Weight: 0.01 pounds 0 kg.
Information:
ID
12
mm
MATERIAL
Nylon
RADIAL HEIGHT
6.5
mm
CS<br>STYLE
Rect Sq
AXIAL WIDTH
1.5
EXCAVATOR, TRACK-TYPE TRACTOR,
Compatible equipment models: 6C9047:
Number on catalog scheme:
13
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-7073 Cylinder Liner Puller 1
B 8T-3035 Hydraulic Line 1
8T-0820 Hydraulic Pressure Gauge 1
9U-6600 Hand Hydraulic Pump (1) 1
350-7768 Electric Hydraulic Pump Gp (115 V) (1) 1
350-7769 Electric Hydraulic Pump Gp (230 V) (1) 1
(1) Any of the pumps may be used for this procedure.Start By:
Remove the piston and connecting rod. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Put a protective cover over the crankshaft to prevent dirt and debris from falling on the crankshaft.
Illustration 1 g00575535
Install Tooling (A) into the cylinder liner. Put the legs into position to engage with the bottom of the cylinder liner.
Attach the hydraulic hoses from the pump group to the hydraulic cylinder on Tooling (A).
Use Tooling (A) and Tooling (B) to pull the cylinder liner from the cylinder block. Pull the cylinder liner until the O-ring seals are free in the bore of the cylinder block.
Illustration 2 g00575536
Attach a suitable lifting device to Tooling (A). Lift cylinder liner (1) out of the cylinder block. The combined weight of cylinder liner (1) and Tooling (A) is approximately 127 kg (280 lb).
Illustration 3 g00575537
Remove O-ring seal (2) and O-ring seals (3) from the cylinder liner.
Position the cylinder liner on suitable cribbing. Remove Tooling (A).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-7073 Cylinder Liner Puller 1
B 8T-3035 Hydraulic Line 1
8T-0820 Hydraulic Pressure Gauge 1
9U-6600 Hand Hydraulic Pump (1) 1
350-7768 Electric Hydraulic Pump Gp (115 V) (1) 1
350-7769 Electric Hydraulic Pump Gp (230 V) (1) 1
(1) Any of the pumps may be used for this procedure.Start By:
Remove the piston and connecting rod. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Put a protective cover over the crankshaft to prevent dirt and debris from falling on the crankshaft.
Illustration 1 g00575535
Install Tooling (A) into the cylinder liner. Put the legs into position to engage with the bottom of the cylinder liner.
Attach the hydraulic hoses from the pump group to the hydraulic cylinder on Tooling (A).
Use Tooling (A) and Tooling (B) to pull the cylinder liner from the cylinder block. Pull the cylinder liner until the O-ring seals are free in the bore of the cylinder block.
Illustration 2 g00575536
Attach a suitable lifting device to Tooling (A). Lift cylinder liner (1) out of the cylinder block. The combined weight of cylinder liner (1) and Tooling (A) is approximately 127 kg (280 lb).
Illustration 3 g00575537
Remove O-ring seal (2) and O-ring seals (3) from the cylinder liner.
Position the cylinder liner on suitable cribbing. Remove Tooling (A).
Cat SIS web machinery list:
Parts washer Caterpillar catalog:
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322 FM L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 320B FM LL, 322 FM L, 322B L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 365B, 365B II, 375, 375 L, 3...
307, 307B, 311B, 312, 312B L, 312C, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320B, 320C, 322B LN, 322C, 325 L, 325B L, 325C, 330, 330 L, 330B L, 330C, 330C L, 345B II, 345B L, 350, 350 L, 36...
1123502
WASHER
307, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 320C, 322B LN, 322C, 325 L, 325B L, 325C, 330 L, 330B L, 330C, 330C L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 385B, 5080, 5090B
307, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 320C, 322B LN, 322C, 325 L, 325B L, 325C, 330 L, 330B L, 330C, 330C L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 385B, 5080, 5090B
307, 312, 315, 317, 320 L, 322, 322 FM L, 325, 325 L, 325 LN, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 375, 375 L, 5080, 5130B, 5230, 5230B, 814F, 815F, 816F, 928F, 938F, 950F II...
0996774
WASHER
311, 312, 315, 317, 320 L, 320B FM LL, 320C FM, 322, 322 FM L, 325, 325 FM L, 325 LN, 330, 330 FM L, 330 L, E110B, E120B, E200B, E70B
311, 312, 315, 317, 320 L, 320B FM LL, 320C FM, 322, 322 FM L, 325, 325 FM L, 325 LN, 330, 330 FM L, 330 L, E110B, E120B, E200B, E70B
5W1697
WASHER
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M312, M315, M316C, M318, M318C, M318C MH, M320, M322C, M325C MH, M325D L MH, M325D MH, MH3037
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M312, M315, M316C, M318, M318C, M318C MH, M320, M322C, M325C MH, M325D L MH, M325D MH, MH3037
5W1699
WASHER
205, 205B, 206, 206B, 211B, 212, 212B, M312, M315, M318, M320
205, 205B, 206, 206B, 211B, 212, 212B, M312, M315, M318, M320
2384C, 2484C, 311D LRR, 312D, 312D L, 312E, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319...
307, 311B, 312, 312B L, 312C, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320B, 320C, 322B LN, 322C, 325 L, 325B L, 325C, 330, 330 L, 330B L, 330C, 330C L, 345B II, 345B L, 350, 350 L, 365B, 36...
312, 315, 317, 322 FM L, 325 L, 330, 330 L, 350, 375, 375 L, 5080, M318D MH, M322D MH
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322 FM L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B