AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

0854923 PUMP GP-GEAR (1 SECTION) BASIC Part of 1038264 Pump listed on Page 178.01 325-A EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
OPERATOR STATION
CONTROL GP-HYDRAULIC

EXCAVATOR 325-A EXCAVATOR 5WK
 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7140 325-A 5WK   (1991)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-HYDRAULIC
114-0667 PUMP GP-HYDRAULIC
103-8264 PUMP GP-GEAR
PUMP GP-GEAR
085-4923 PUMP GP-GEAR
ROTATING GP-PUMP
087-4780 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4781 ROTATING GP-PUMP
PUMP GP-GEAR
087-4727 PUMP GP-GEAR
 

#XEBP71400400
 

085-4923: PUMP GP-GEAR

0854923 PUMP GP-GEAR (1 SECTION) BASIC
Part of 1038264 Pump listed on Page 178.01
h37358e XEBP7140
0854923 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-8269 [1] PUMP GP  
2. 5A-3604 [2] BOLT (25mm LONG)  
3. 6V-5196 [2] BOLT (80mm LONG)  
4. 7J-9108 [1] SEAL  
5. 085-8911 [1] SEAL  
 

#XEBP71400401
 

087-4780: ROTATING GP-PUMP

0874780 ROTATING GP-PUMP (BASIC)
Part of 0874718 and 1140667 Pump listed on Pages 178 and 178A
0874782--Page 180
h30305e XEBP7140
0874780 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-5865 [1] PLATE  
2. 087-4782 Y [1] ROTATING GP  
3. 099-5864 [1] SHAFT  
4. 9T-3873 [1] BEARING AS  
5. 9T-3876 [1] BEARING AS  
6. 9T-2004 [1] NUT  
7. 9T-3376 B [1] SHIM (2.7mm THICK)  
  9T-3377 B [1] SHIM (2.8mm THICK)  
  9T-3378 B [1] SHIM (2.9mm THICK)  
  9T-3379 B [1] SHIM (3.0mm THICK)  
  9T-3380 B [1] SHIM (3.1mm THICK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP71400402
 

087-4781: ROTATING GP-PUMP

0874781 ROTATING GP-PUMP (BASIC)
Part of 0874718 and 1140667 Pump listed on Pages 178 and 178A
0874782--Page 180
h30306e XEBP7140
0874781 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-5858 [1] PLATE  
2. 087-4782 Y [1] ROTATING GP  
3. 099-5852 [1] SHAFT  
4. 9T-3873 [1] BEARING AS  
5. 9T-3876 [1] BEARING AS  
6. 9T-2004 [1] NUT  
7. 9T-3376 B [1] SHIM (2.7mm THICK)  
  9T-3377 B [1] SHIM (2.8mm THICK)  
  9T-3378 B [1] SHIM (2.9mm THICK)  
  9T-3379 B [1] SHIM (3.0mm THICK)  
  9T-3380 B [1] SHIM (3.1mm THICK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP71400403
 

087-4727: PUMP GP-GEAR

0874727 PUMP GP-GEAR (1 SECTION) BASIC
Part of 1038264 Pump listed on Page 178.01
h30301e XEBP7140
0874727 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-4855 [1] SEAL  
2. 087-4738 [1] PUMP GP  
3. 096-0187 [4] BOLT (65mm LONG)  
4. 5M-6509 [1] SEAL  
5. 9T-3929 [1] PLUG  
6. 9T-3928 [1] PLUG  
 

#XEBP71400404
 

087-4782: ROTATING GP-PUMP

0874782 ROTATING GP-PUMP (BASIC)
Part of 0874780 and 0874781 Rotating listed on Page 179
h38533e XEBP7140
0874782 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3368 [4] SPRING  
2. 087-4783 [1] CYLINDER  
3. 105-1516 [1] PLATE  
4. 105-1517 [14] SCREW  
5. 9T-3369 [1] PIN  
6. 099-5713 [7] PISTON  
7. 9T-3745 [14] RING  
8. 9T-3391 B [1] SPACER (5.3mm THICK)  
  9T-3392 B [1] SPACER (5.4mm THICK)  
  9T-3393 B [1] SPACER (5.5mm THICK)  
  9T-3394 B [1] SPACER (5.6mm THICK)  
  9T-3395 B [1] SPACER (5.7mm THICK)  
  9T-3396 B [1] SPACER (5.8mm THICK)  
  9T-3397 B [1] SPACER (5.9mm THICK)  
  B   USE AS REQUIRED
 

#XEBP71400405
 

087-4719: HEAD GP-PUMP CONTROL

0874719 HEAD GP-PUMP CONTROL
S/N 8JG1-Up, 7CJ1-Up, 5WK1-Up, 6KK1-Up, 8NL1-00105, 9KL1-00140
Part of 7Y4002 Pump listed on Page 177
0874740--Page 182, 0995693--Page 183
h30300e XEBP7140
0874719 HEAD GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-4740 Y [1] HEAD GP  
2. 087-4741 [1] HOUSING  
3. 9T-3382 [1] GASKET  
4. 099-5837 [2] SPRING  
5. 099-8225 [2] DOWEL  
6. 099-5835 [2] TRUNNION  
7. 099-5846 [2] RING  
8. 6V-5391 [2] SEAL  
9. 099-5839 [2] PIN  
10. 8T-4139 [2] BOLT  
11. 099-5838 [2] PISTON  
12. 099-5693 Y [2] COVER GP  
13. 099-5847 [2] RING  
14. 099-5840 [2] RING  
15. 099-5848 [2] RING  
16. 099-8232 [2] SEAL  
17. 099-5834 [2] PISTON  
18. 087-4744 [2] SPACER  
19. 9T-3941 [3] PLUG  
20. 095-0671 [8] BOLT  
21. 099-5873 [4] BOLT  
22. 9T-3940 [2] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#XEBP71400406
 

122-5109: HEAD GP-PUMP CONTROL

1225109 HEAD GP-PUMP CONTROL
S/N 8NL00106-Up, 9KL00141-Up
Part of 1140604 Pump listed on Page 177.01
1225110--Page 182.01, 0995693--Page 183
h42661e XEBP7140
1225109 HEAD GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-5110 Y [1] HEAD GP  
2. 114-0772 [1] HOUSING  
3. 9T-3382 [1] GASKET  
4. 099-5837 [2] SPRING  
5. 099-8225 [2] DOWEL  
6. 099-5835 [2] TRUNNION  
7. 099-5846 [2] RING  
8. 6V-5391 [2] SEAL  
9. 099-5839 [2] PIN  
10. 8T-4139 [2] BOLT(30mm LONG)  
11. 099-5838 [2] PISTON  
12. 099-5693 Y [2] COVER GP  
13. 099-5847 [2] RING  
14. 099-5840 [2] RING  
15. 099-5848 [2] RING  
16. 099-8232 [2] SEAL  
17. 099-5834 [2] PISTON  
18. 087-4744 [2] SPACER  
19. 9T-3941 [2] PLUG  
20. 8T-7811 [8] BOLT(50mm LONG)  
21. 099-5873 [4] BOLT(75mm LONG)  
  Y   SEPARATE ILLUSTRATION
 

#XEBP71400407
 

087-4740: HEAD GP-PUMP CONTROL

0874740 HEAD GP-PUMP CONTROL
S/N 8JG1-Up, 7CJ1-Up, 5WK1-Up, 6KK1-Up, 8NL1-00105, 9KL1-00140
Part of 0874719 Head listed on Page 181
0874754--Page 183
h30302e XEBP7140
0874740 HEAD GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8397 [4] SEAL  
2. 6V-5196 [6] BOLT  
3. 087-4755 [1] HOUSING  
4. 087-4754 Y [2] HEAD GP  
5. 087-4762 [2] SPRING  
6. 087-4761 [2] SPACER  
7. 087-4763 [2] SPRING  
8. 005-8593 [2] SEAL  
9. 4J-5477 [2] SEAL  
10. 087-4760 [2] SPACER  
11. 9T-3928 [2] PLUG  
12. 087-4756 [2] PISTON  
13. 087-4759 [2] SETSCREW  
14. 9T-3853 [2] LOCK NUT  
15. 099-5702 [2] SHEET  
16. 087-4758 [2] SPRING  
17. 099-5845 [3] PLUG  
18. 3J-1907 [3] SEAL  
19. 9T-3941 [9] PLUG  
20. 099-5841 [3] SEAT  
21. 6E-3864 [3] VALVE  
22. 087-4766 [3] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#XEBP71400408
 

122-5110: HEAD GP-PUMP CONTROL

1225110 HEAD GP-PUMP CONTROL
S/N 8NL00106-Up, 9KL00141-Up
Part of 1225109 Head listed on Page 181.01
0874754--Page 183
h42662e XEBP7140
1225110 HEAD GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8397 [2] SEAL  
2. 6V-5196 [6] BOLT(80mm LONG)  
3. 114-0672 [1] HOUSING  
4. 087-4754 Y [2] HEAD GP  
5. 087-4762 [2] SPRING  
6. 087-4761 [2] SPACER  
7. 087-4763 [2] SPRING  
8. 005-8593 [2] SEAL  
9. 4J-5477 [2] SEAL  
10. 087-4760 [2] SPACER  
11. 9T-3928 [2] PLUG  
12. 123-1979 [2] PISTON  
13. 087-4759 [2] SETSCREW  
14. 9T-3853 [2] LOCK NUT  
15. 123-1981 [2] SEAT  
16. 123-1980 [2] SPRING  
17. 099-5845 [1] PLUG  
18. 3J-1907 [1] SEAL  
19. 9T-3941 [9] PLUG  
20. 099-5841 [1] SEAT  
21. 6E-3864 [1] VALVE  
22. 087-4766 [1] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#XEBP71400409
 

087-4754: HEAD GP-PUMP CONTROL

0874754 HEAD GP-PUMP CONTROL
Part of 0874740 and 1225110 Head listed on Pages 182 and 182.01
h30303e XEBP7140
0874754 HEAD GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-5742 [1] SEATSCREW  
2. 9T-3853 [1] LOCKNUT  
3. 099-5736 [1] SPRING  
4. 4J-5351 [1] SEAL  
5. 087-4785 [2] PLUG  
6. 099-5731 [1] PISTON  
7. 087-4775 [1] HOUSING  
8. 9X-2537 [4] BOLT  
9. 099-5709 [1] PIN  
10. 2K-8198 [1] SEAL  
11. 4J-5477 [2] SEAL  
12. 4I-5852 [1] BUSHING  
13. 087-4778 [1] PISTON  
14. 099-5735 [2] SEAT  
15. 4I-5851 [1] COVER  
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 325-A :

103-8264 PUMP GP-GEAR
PUMP GP-HYDRAULIC
114-0667 PUMP GP-HYDRAULIC
PUMP GP-HYDRAULIC
087-4718 PUMP GP-HYDRAULIC
PUMP GP-PISTON
114-0604 PUMP GP-PISTON
PUMP GP-PISTON
7Y-4002 PUMP GP-PISTON
COUPLING GP-PUMP
7Y-0461 COUPLING GP-PUMP
PUMP & MOUNTING GP
7Y-0420 PUMP & MOUNTING GP
PUMP & MOUNTING GP
7Y-0420 PUMP & MOUNTING GP
ROTATING GP-PUMP
087-4780 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4781 ROTATING GP-PUMP
PUMP GP-GEAR
087-4727 PUMP GP-GEAR
ROTATING GP-PUMP
087-4782 ROTATING GP-PUMP
HEAD GP-PUMP CONTROL
087-4719 HEAD GP-PUMP CONTROL
HEAD GP-PUMP CONTROL
122-5109 HEAD GP-PUMP CONTROL
HEAD GP-PUMP CONTROL
087-4740 HEAD GP-PUMP CONTROL
HEAD GP-PUMP CONTROL
122-5110 HEAD GP-PUMP CONTROL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.