HYDRAULIC SYSTEM
CYLINDER GPLINES GP-STICK
HYDRAULIC SYSTEM
CYLINDER GP#XEBP71700380
4I-1003: LINES GP-STICK CYLINDER
4I1003 LINES GP-STICK CYLINDER (R-BOOM)
S/N 8LK1-01100, 1KL1-00381
Part of 4I1873 Cylinder listed on Page 167
An Attachment
S/N 8LK1-01100, 1KL1-00381
Part of 4I1873 Cylinder listed on Page 167
An Attachment
Parts for your 320 L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-0343 | [8] | BOLT (55mm LONG) | |
2. | 4I-3634 | [1] | TUBE AS | |
3. | 096-4447 | [1] | CLAMP | |
4. | 8T-4910 | [1] | BOLT (60mm LONG) | |
5. | 095-0817 | [1] | WASHER | |
6. | 096-6223 | [2] | CONNECTOR | |
7. | 095-1596 | [2] | SEAL | |
8. | 099-5565 | [1] | SUPPORT AS | |
9. | 095-1600 | [2] | SEAL | |
10. | 096-4445 | [1] | ELBOW | |
11. | 4I-3622 | [2] | BOLT | |
12. | 096-4415 | [2] | WASHER | |
13. | 4I-3635 | [1] | SUPPORT AS |
#XEBP71700381
4I-1003: LINES GP-STICK CYLINDER
4I1003 LINES GP-STICK CYLINDER (R-BOOM)
S/N 8LK01101-Up, 1KL00382-Up
Part of 4I1873 Cylinder listed on Page 167
An Attachment
S/N 8LK01101-Up, 1KL00382-Up
Part of 4I1873 Cylinder listed on Page 167
An Attachment
Parts for your 320 L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-0343 | [8] | BOLT (55mm LONG) | |
2. | 111-1132 | [1] | TUBE AS | |
3. | 096-4480 | [1] | CLAMP | |
4. | 6V-7673 | [1] | BOLT (50mm LONG) | |
5. | 095-0817 | [1] | WASHER | |
6. | 096-6223 | [1] | CONNECTOR | |
7. | 095-1596 | [1] | SEAL | |
8. | 099-5565 | [1] | SUPPORT AS | |
9. | 095-1600 | [2] | SEAL | |
10. | 096-4445 | [1] | ELBOW | |
11. | 4I-3622 | [2] | BOLT | |
12. | 096-4415 | [2] | WASHER | |
13. | 4I-3635 | [1] | SUPPORT AS | |
14. | 6I-6973 | [1] | CONNECTOR | |
15. | 095-1592 | [1] | SEAL |
#XEBP71700382
4I-1004: LINES GP-STICK CYLINDER
4I1004 LINES GP-STICK CYLINDER (M-BOOM)
S/N 8LK1-01100, 1KL1-00381
Part of 4I1874 Cylinder listed on Page 168
An Attachment
S/N 8LK1-01100, 1KL1-00381
Part of 4I1874 Cylinder listed on Page 168
An Attachment
Parts for your 320 L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-0343 | [8] | BOLT (55mm LONG) | |
2. | 4I-3648 | [1] | TUBE AS | |
3. | 096-4447 | [1] | CLAMP | |
4. | 8T-4910 | [1] | BOLT (60mm LONG) | |
5. | 095-0817 | [1] | WASHER | |
6. | 096-6223 | [2] | CONNECTOR | |
7. | 095-1596 | [2] | SEAL | |
8. | 099-5565 | [1] | SUPPORT AS | |
9. | 095-1600 | [2] | SEAL | |
10. | 096-4445 | [1] | ELBOW | |
11. | 4I-3622 | [2] | BOLT | |
12. | 096-4415 | [2] | WASHER | |
13. | 4I-3635 | [1] | SUPPORT AS |
#XEBP71700383
4I-1004: LINES GP-STICK CYLINDER
4I1004 LINES GP-STICK CYLINDER (M-BOOM)
S/N 8LK01101-Up, 1KL00382-Up
Part of 4I1874 Cylinder listed on Page 168
An Attachment
S/N 8LK01101-Up, 1KL00382-Up
Part of 4I1874 Cylinder listed on Page 168
An Attachment
Parts for your 320 L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-0343 | [8] | BOLT (55mm LONG) | |
2. | 111-1133 | [1] | TUBE AS | |
3. | 096-4480 | [1] | CLAMP | |
4. | 6V-7673 | [1] | BOLT (50mm LONG) | |
5. | 095-0817 | [1] | WASHER | |
6. | 096-6223 | [1] | CONNECTOR | |
7. | 095-1596 | [1] | SEAL | |
8. | 099-5565 | [1] | SUPPORT AS | |
9. | 095-1600 | [2] | SEAL | |
10. | 096-4445 | [1] | ELBOW | |
11. | 4I-3622 | [2] | BOLT | |
12. | 096-4415 | [2] | WASHER | |
13. | 4I-3635 | [1] | SUPPORT AS | |
14. | 6I-6973 | [1] | CONNECTOR | |
15. | 095-1592 | [1] | SEAL |
#XEBP71700384
087-5466: LINES GP-STICK
#XEBP71700385
4I-3964: LINES GP-STICK
#XEBP71700386
4I-3972: LINES GP-STICK
4I3972 LINES GP-STICK
Type 1
Part of 0873705 R3.9B Stick Ar listed on Page 360
An Attachment
Type 1
Part of 0873705 R3.9B Stick Ar listed on Page 360
An Attachment
#XEBP71700387
4I-3968: LINES GP-STICK
#XEBP71700388
4I-3972: LINES GP-STICK
4I3972 LINES GP-STICK
Type 2
Part of 0873705 R3.9B Stick Ar listed on Page 360
An Attachment
Type 2
Part of 0873705 R3.9B Stick Ar listed on Page 360
An Attachment
Parts for your 320 L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 102-1279 | [2] | HOSE AS | |
5P-0200 E | HOSE (165cm) | |||
5P-1027 | [2] | SLEEVE | ||
6V-0756 E | GUARD (230cm) | |||
7X-1451 | [2] | STEM AS (STRAIGHT) | ||
2. | 6V-9746 | [6] | SEAL | |
3. | 102-1283 | [2] | HOSE AS | |
5P-0200 E | HOSE (89cm) | |||
5P-1027 | [2] | SLEEVE | ||
6V-0756 E | GUARD (115cm) | |||
7X-1451 | [1] | STEM AS (STRAIGHT) | ||
7X-1467 | [1] | STEM AS (45 deg.) | ||
4. | 8T-4179 | [8] | BOLT (20mm LONG) | |
5. | 8T-4223 | [8] | WASHER | |
6. | 102-1291 | [1] | ELBOW AS | |
7. | 102-1120 | [1] | ELBOW AS | |
E | ORDER BY THE CENTIMETER |
#XEBP71700389
4I-3966: LINES GP-STICK
4I3966 LINES GP-STICK
Type 1
Part of 0873709 R1.9C Stick Ar listed on Page 361
An Attachment
Type 1
Part of 0873709 R1.9C Stick Ar listed on Page 361
An Attachment
Parts for your 320 L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5I-8715 | [2] | HOSE AS | |
2P-3263 | [1] | STEM AS (90 deg.) | ||
5P-0200 E | HOSE (140cm) | |||
5P-1027 | [2] | SLEEVE | ||
6V-0756 E | GUARD (192cm) | |||
7X-1451 | [1] | STEM AS (STRAIGHT) | ||
2. | 5I-8536 | [1] | TUBE AS | |
3. | 1P-3703 | [2] | SEAL | |
4. | 8T-4185 | [4] | BOLT (50mm LONG) | |
5. | 8T-4139 | [2] | BOLT (30mm LONG) | |
6. | 8T-4223 | [2] | WASHER | |
7. | 7Y-4868 | [2] | CLIP | |
8. | 7Y-5122 | [1] | SUPPORT AS | |
9. | 8T-4195 | [4] | BOLT (30mm LONG) | |
10. | 8T-4121 | [12] | WASHER | |
11. | 5I-4174 | [1] | BLOCK | |
12. | 8T-4198 | [4] | BOLT (100mm LONG) | |
13. | 1P-5765 | [4] | FLANGE | |
14. | 1P-3702 | [2] | SEAL | |
15. | 7Y-4642 | [1] | SUPPORT AS | |
16. | 8T-4182 | [4] | BOLT (45mm LONG) | |
17. | 5I-8748 | [4] | SPACER | |
E | ORDER BY THE CENTIMETER |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}