AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1262119 CYLINDER & SEAL GP-BUCKET B FAMILY PART OF 1262118-Page 189 FOR DEMOLITION ARRANGEMENT 320B L


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-HYDRAULIC

EXCAVATOR 320B L EXCAVATOR 1ES
 322B L TRACK-TYPE EXCAVATOR /HAMMER ARRANGEMENT,/ 1ES00001-UP (MACHINE) POWERED BY 3066 ENGINE XEBP7646 320B L 1ES   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
154-0726 CYLINDER & LINES GP
154-0725 CYLINDER & LINES GP
154-0733 CYLINDER & LINES GP
154-0742 CYLINDER & LINES GP
126-2118 CYLINDER & LINES GP
CYLINDER & SEAL GP
154-0727 CYLINDER & SEAL GP
CYLINDER & SEAL GP
154-0734 CYLINDER & SEAL GP
CYLINDER & SEAL GP
154-0743 CYLINDER & SEAL GP
CYLINDER & SEAL GP
126-2119 CYLINDER & SEAL GP
 

#XEBP76460200
 

126-2119: CYLINDER & SEAL GP

1262119 CYLINDER & SEAL GP-BUCKET
B FAMILY
PART OF 1262118-Page 189
FOR DEMOLITION ARRANGEMENT
h62313e XEBP7646
1262119 CYLINDER & SEAL GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-1611 J [1] SEAL  
2. 086-1044 J [1] RING  
3. 096-1568 J [1] RING (BACKUP)  
4. 096-1567 J [1] SEAL  
5. 086-1023 [1] SEAL  
6. 096-4402 [1] BEARING  
7. 094-0747 [1] RING (RETAINING)  
8. 5I-4614 [1] HEAD  
9. 7Y-5217 [8] BOLT (L=70mm)  
10. 096-1566 J [1] RING (BACKUP)  
11. 095-1718 J [1] SEAL-O-RING (ID=119.40mm)  
12. 129-8023 [1] ROD AS  
  119-5229 [1] BEARING  
13. 129-8022 [1] CYLINDER AS  
  129-8032 [1] BEARING  
14. 086-1088 [1] STOP  
15. 086-1089 J [1] RING (SEALING)  
16. 5I-4615 [1] PISTON  
17. 096-1564 J [1] SEAL AS  
18. 5I-6063 J [2] RING  
19. 096-1565 J [2] RING  
20. 5I-4616 J [1] SHIM (T=0.3mm)  
21. 096-3216 [1] SETSCREW  
22. 096-3891 [1] BALL  
23. 5I-4617 [1] LOCKNUT  
24. 096-4411 [4] SEAL  
25. 3B-8489 [2] FITTING  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  134-7123 [1] SEAL KIT (INCLUDES PARTS MARKED J)  
 

#XEBP76460201
 

118-3949: LINES GP

1183949 LINES GP-CYLINDER
LEFT HAND
PART OF 1540726-Page 187
h53084e XEBP7646
1183949 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3618 [1] TUBE AS  
2. 4I-3619 [1] TUBE AS  
3. 086-2746 [2] CONNECTOR  
4. 095-1592 [2] SEAL-O-RING (ID=23.70mm)  
5. 095-1597 [2] SEAL-O-RING (ID=29.70mm)  
6. 8T-1160 [8] BOLT (L=50mm)  
7. 8T-3653 [1] BOLT (L=80mm)  
8. 3B-4509 [1] LOCKWASHER  
9. 094-1920 [2] CLAMP  
10. 137-3709 [1] SUPPORT AS  
11. 4I-3621 [1] SUPPORT  
12. 8T-4186 [2] BOLT (L=35mm)  
13. 095-9397 [2] LOCKWASHER  
 

#XEBP76460202
 

118-3957: LINES GP

1183957 LINES GP-BOOM CYLINDER
RIGHT HAND
PART OF 1540725-Page 187
h53085e XEBP7646
1183957 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3616 [1] TUBE AS  
2. 4I-3617 [1] TUBE AS  
3. 095-1597 [2] SEAL-O-RING (ID=29.70mm)  
4. 8T-1160 [8] BOLT (L=50mm)  
5. 086-2746 [2] CONNECTOR  
6. 095-1592 [2] SEAL-O-RING (ID=23.70mm)  
7. 094-1920 [2] CLAMP  
8. 8T-3653 [1] BOLT (L=80mm)  
9. 3B-4509 [1] LOCKWASHER  
10. 8T-4196 [2] BOLT (L=35mm)  
11. 095-9397 [2] LOCKWASHER  
12. 4I-3621 [1] SUPPORT  
13. 137-3709 [1] SUPPORT AS  
 

#XEBP76460203
 

118-3951: LINES GP

1183951 LINES GP-STICK CYLINDER
R-BOOM
PART OF 1540733-Page 188
h53086e XEBP7646
1183951 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1160 [4] BOLT (L=50mm)  
2. 095-1597 [1] SEAL-O-RING (ID=29.70mm)  
3. 124-1032 [1] TUBE AS  
4. 086-2746 [1] CONNECTOR  
5. 095-1592 [1] SEAL-O-RING (ID=23.70mm)  
6. 096-6223 [1] CONNECTOR  
7. 095-1596 [1] SEAL-O-RING (ID=27.80mm)  
8. 8T-4910 [1] BOLT (L=60mm)  
9. 8T-4223 [1] WASHER  
10. 8T-0343 [4] BOLT (L=55mm)  
11. 096-4445 [1] ELBOW  
12. 095-1600 [1] SEAL-O-RING (ID=33.70mm)  
13. 124-1020 [1] SUPPORT  
14. 8T-4196 [2] BOLT (L=35mm)  
15. 095-9397 [2] LOCKWASHER  
16. 124-1019 [1] SUPPORT AS  
17. 096-4480 [1] CLAMP  
18. 9F-4976 [1] LOCKWASHER  
 

#XEBP76460204
 

118-3968: LINES GP

1183968 LINES GP-BUCKET CYLINDER
B FAMILY-HIGH AMBIENT
PART OF 1540742-Page 189
FOR HAMMER ARRANGEMENT
h53088e XEBP7646
1183968 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1597 [2] SEAL-O-RING (ID=29.70mm)  
2. 9X-6032 [8] BOLT (L=30mm)  
3. 4I-3659 [1] TUBE AS  
4. 086-2746 [2] CONNECTOR  
5. 095-1592 [2] SEAL-O-RING (ID=23.70)  
6. 4I-8881 [1] TUBE AS  
7. 096-4480 [1] CLAMP  
8. 8T-4910 [1] BOLT (L=60mm)  
9. 8T-4223 [1] WASHER (HARD)  
10. 124-1034 [1] SUPPORT AS  
11. 096-4412 [1] SUPPORT  
12. 8T-4196 [2] BOLT (L=35mm)  
13. 095-9397 [2] LOCKWASHER  
14. 9F-4976 [1] LOCKWASHER  
 

#XEBP76460205
 

128-7508: LINES GP

1287508 LINES GP-BUCKET CYLINDER
B FAMILY
PART OF 1262118-Page 189
FOR DEMOLITION ARRANGEMENT
h55823e XEBP7646
1287508 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1597 [2] SEAL-O-RING (ID=29.70mm)  
2. 9X-6032 [8] BOLT (L=30mm)  
3. 5I-4618 [1] TUBE AS  
4. 086-2746 [2] CONNECTOR  
5. 095-1592 [2] SEAL-O-RING (ID=23.70mm)  
6. 096-6465 [1] TUBE AS  
7. 096-4480 [1] CLAMP  
8. 6V-7673 [1] BOLT (L=50mm)  
9. 095-0817 [1] LOCKWASHER  
10. 5I-4619 [1] SUPPORT AS  
11. 5I-4620 [1] SUPPORT  
12. 4I-3622 [2] BOLT  
13. 096-4415 [2] LOCKWASHER  
 

#XEBP76460206
 

124-1044: LINES GP

1241044 LINES GP-BOOM
R-BOOM
PART OF 1317659, 1680552-Page 367
h65286e XEBP7646
1241044 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-4404 [1] TUBE AS  
2. 4I-8889 [8] SEAL  
3. 160-4405 [1] TUBE AS  
4. 4I-8891 [2] SEAL  
5. 124-1074 [1] TUBE AS  
6. 124-1076 [1] TUBE AS  
7. 4I-3820 [1] HOSE AS  
  5P-0200 E HOSE (87cm)  
  5P-1027 [2] SLEEVE  
  7X-1451 [2] STEM AS (STRAIGHT)  
8. 4I-3823 [1] HOSE AS  
  5P-0201 E HOSE (89cm)  
  7X-1452 [2] STEM AS (STRAIGHT)  
9. 124-1085 [2] TUBE AS  
10. 8T-4223 [20] WASHER (HARD)  
11. 8T-4139 [20] BOLT (L=30mm)  
12. 4I-1674 [6] CLIP  
13. 4I-1676 [6] CLIP  
14. 7Y-4868 [8] CLIP  
15. 6V-9746 [1] SEAL-O-RING (ID=18.94mm)  
16. 5K-9090 [1] SEAL-O-RING (ID=23.66mm)  
 

#XEBP76460207
 

127-6770: LINES GP

1276770 LINES GP-BOOM
R-BOOM
PART OF 1347092-Page 366
1276844-Page 297.01
FOR DEMOLITION ARRANGEMENT
h56527e XEBP7646
1276770 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-4404 [1] TUBE AS  
2. 4I-8889 [10] SEAL  
3. 160-4405 [1] TUBE AS  
4. 4I-8891 [2] SEAL  
5. 124-1074 [1] TUBE AS  
6. 127-6844 Y [1] VALVE GP  
7. 4I-3820 [1] HOSE AS  
  5P-0200 E HOSE (87cm)  
  5P-1027 [2] SLEEVE  
  7X-1451 [2] STEM AS (STRAIGHT)  
8. 4I-3823 [1] HOSE AS  
  5P-0201 E HOSE (89cm)  
  5P-1010 [2] SLEEVE  
  7X-1452 [2] STEM AS (STRAIGHT)  
9. 124-1085 [2] TUBE AS  
10. 8T-4223 [20] WASHER (HARD)  
11. 8T-4139 [20] BOLT (L=30mm)  
12. 4I-1674 [6] CLIP  
13. 4I-1676 [6] CLIP  
14. 7Y-4868 [8] CLIP  
15. 127-6842 [1] TUBE AS  
16. 127-6843 [1] TUBE AS  
17. 4I-8977 [2] CONNECTOR  
18. 7M-8485 [2] SEAL-O-RING (ID=29.74mm)  
19. 6V-9746 [1] SEAL-O-RING (ID=18.94mm)  
20. 5K-9090 [1] SEAL-O-RING (ID=23.66mm)  
  E   ORDER BY THE CENTIMETER
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76460208
 

116-9102: LINES GP

1169102 LINES GP-AUXILIARY HYDRAULIC
R-BOOM
h54537e XEBP7646
1169102 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-9189 [1] TUBE AS  
2. 116-9188 [1] TUBE AS  
3. 116-9191 [1] TUBE AS  
4. 116-9190 [1] TUBE AS  
5. 5K-9090 [4] SEAL-O-RING (ID=23.66mm)  
6. 1P-3705 [1] SEAL  
7. 1P-5767 [4] FLANGE  
8. 1P-3704 [2] SEAL  
9. 7Y-3732 [8] CLIP  
10. 124-0909 [8] CLIP  
11. 3V-9744 [3] SPACER  
12. 121-1674 [3] PLATE  
13. 121-1677 [3] PLATE  
14. 121-1946 [3] PLATE  
15. 127-6817 [1] PLATE  
16. 127-6816 [1] PLATE  
17. 7X-2554 [12] BOLT (L=70mm)  
18. 7X-2555 [6] BOLT (L=80mm)  
19. 8T-4184 [4] BOLT (L=45mm)  
20. 8T-4194 [8] BOLT (L=50mm)  
21. 8T-4648 [6] BOLT (L=70mm)  
22. 8T-4956 [2] BOLT (L=35mm)  
23. 8T-7338 [6] BOLT (L=45mm)  
24. 8T-4223 [16] WASHER-HARD  
25. 9X-8257 [24] WASHER  
 

#XEBP76460209
 

087-5466: LINES GP

0875466 LINES GP-STICK
R2.92B STICK
PART OF 1263822, 1263823-Page 368, 1680594-Page 368.01
h53103e XEBP7646
0875466 LINES GP Parts scheme
  For full view, you need register

Parts for your 320B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-5556 [2] HOSE AS  
  5P-0200 E HOSE (147cm)  
  5P-1027 [2] SLEEVE  
  6V-0745 E GUARD (203cm)  
  7X-1451 [2] STEM AS (STRAIGHT)  
2. 6V-9746 [2] SEAL-O-RING (ID=18.94mm)  
  E   ORDER BY THE CENTIMETER
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Stick Cylinder
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Boom Cylinders
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Service Magazine
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
New High Temperature Buffer Seals Reduce Oil Leakage From Hydraulic Cylinders {7562}
2002/05/06
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Published Specifications for Bucket Cylinders are Not Complete {5457}
2002/09/02
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 320B L :

CYLINDER & SEAL GP
154-0743 CYLINDER & SEAL GP
CYLINDER & SEAL GP
154-0734 CYLINDER & SEAL GP
CYLINDER & SEAL GP
154-0727 CYLINDER & SEAL GP
126-2118 CYLINDER & LINES GP
154-0742 CYLINDER & LINES GP
154-0733 CYLINDER & LINES GP
154-0725 CYLINDER & LINES GP
154-0726 CYLINDER & LINES GP
LINES GP
118-3949 LINES GP
LINES GP
118-3957 LINES GP
LINES GP
118-3951 LINES GP
LINES GP
118-3968 LINES GP
LINES GP
128-7508 LINES GP
LINES GP
124-1044 LINES GP
LINES GP
127-6770 LINES GP
LINES GP
116-9102 LINES GP

Truck sale:

Caterpillar 320 B L, Construction
36,500 
Caterpillar 320 B L, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 320BL, Construction
39,752 
Caterpillar 320BL, Construction
- Crawler Excavators
TOROMONT CAT
Canada
CATERPILLAR 320BL 1997
 
CATERPILLAR 320BL 1997
- TRACK EXCAVATORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR 320BL 2000
 
CATERPILLAR 320BL 2000
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR 320BL 2000
 
CATERPILLAR 320BL 2000
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.