AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1232080 CYLINDER AND LINES GP-STICK PART OF 1963309-Page 129 320C FM EXCAVATOR


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
CYLINDER GP
LINES GP-CYLINDER
LINES GP-BOOM
LINES GP-PILOT
LINES GP-AUXILIARY
ELECTRICAL AND STARTING SYSTEM
GENERATOR GP
HYDRAULIC SYSTEM
VALVE GP-FLOW CONTROL

EXCAVATOR 320C FM EXCAVATOR SAH
 320C SUPPLEMENT FOR EXCAVATOR /MATERIAL HANDLER/ SAH00001-UP (MACHINE) XEBP8110 320C FM SAH   (2002)

HYDRAULIC SYSTEM

CYLINDER GP
123-2080 CYLINDER AND LINES GP-STICK
CYLINDER AND SEAL GP-BOOM
123-2081 CYLINDER AND SEAL GP-BOOM
CYLINDER AND SEAL GP-BOOM
133-6770 CYLINDER AND SEAL GP-BOOM
 

#XEBP81100060
 

123-2080: CYLINDER AND LINES GP-STICK

1232080 CYLINDER AND LINES GP-STICK
PART OF 1963309-Page 129
XEBP81100060 XEBP8110
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  123-2081 [1] CYLINDER AND SEAL GP (STICK)  
  123-2082 [1] LINES GP (STICK CYLINDER)  
 

#XEBP81100061
 

123-2082: LINES GP-STICK CYLINDER

1232082 LINES GP-STICK CYLINDER
PART OF 1232080-Page 87
c964425 XEBP8110
1232082 LINES GP-STICK CYLINDER Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0343 M [4] BOLT (SOCKET HEAD)  
2. 095-1600 [1] SEAL-O-RING (ID=33.7mm)  
3. 114-0718 [1] TUBE AS  
4. 096-6223 [1] CONNECTOR  
5. 095-1596 [1] SEAL-O-RING (ID=28.7mm)  
6. 8T-4910 M [1] BOLT (L=60mm)  
7. 9F-4976 [1] LOCKWASHER  
8. 124-0913 [1] SUPPORT AS  
9. 8T-4196 M [2] BOLT (L=35mm)  
10. 095-9397 [2] LOCKWASHER  
11. 124-0914 [1] SUPPORT  
12. 096-4447 [1] CLAMP  
  M   METRIC PART
 

#XEBP81100062
 

123-2081: CYLINDER AND SEAL GP-BOOM

1232081 CYLINDER AND SEAL GP-BOOM
PART OF 1232080-Page 87
c964426 XEBP8110
1232081 CYLINDER AND SEAL GP-BOOM Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6909 J [1] SEAL  
2. 099-5575 J [1] RING (BUCK UP)  
3. 095-5600 J [1] SEAL  
4. 114-0704 J [1] SEAL  
5. 121-1547 [1] HEAD  
6. 099-5572 [1] BEARING  
7. 099-5573 [1] RING (RETAINING)  
8. 9X-2404 M [12] BOLT (L=90mm)  
9. 114-0706 J [1] RING (BUCK UP)  
10. 095-1723 J [1] SEAL (ID=144.40mm)  
11. 123-2120 R [1] ROD AS  
11A. 121-1550 [1] BEARING  
12. 123-2119 R [1] CYLINDER AS  
12A. 121-1550 [1] BEARING  
13. [1] STOP  
14. 099-8282 J [1] RING (BUCKUP)  
15. 114-0709 [1] PISTON  
16. 114-0710 J [1] SEAL AS  
17. 114-0711 J [2] RING (BUCK UP)  
18. 114-0712 J [2] RING  
19. 114-0713 J [2] RING  
20. 099-6018 BJ [1] SHIM (T=0.3mm)  
21. 099-6019 [1] LOCKNUT  
22. 096-6210 M [1] SETSCREW  
23. 093-6211 [1] BALL  
24. 085-8605 [1] RING (RETAINING)  
25. 121-1549 [1] STOP  
26. 085-8604 [2] RING (RETAINING)  
27. 085-5864 J [1] RING (SEALING)  
28. 096-0854 [4] SEAL  
29. 3B-8489 [1] FITTING  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  137-3767 [1] SEAL KIT  
  B   USE AS REQUIRED
  J   INCLUDES PARTS MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#XEBP81100063
 

133-6770: CYLINDER AND SEAL GP-BOOM

1336770 CYLINDER AND SEAL GP-BOOM
PART OF 1963309-Page 138
c964427 XEBP8110
1336770 CYLINDER AND SEAL GP-BOOM Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6904 J [1] SEAL  
2. 121-1372 J [1] RING (BUCK UP)  
3. 121-1371 J [1] SEAL  
4. 204-3623 J [1] SEAL  
5. 096-5625 [1] BEARING  
6. 094-1931 [1] RING (SEALING)  
7. 185-0335 [1] HEAD  
8. 4I-3628 [12] BOLT (L=80mm)  
9. 4I-3627 J [1] RING (BUCK UP)  
10. 095-1721 J [1] SEAL (ID=134.40mm)  
11. 133-6825 [1] ROD AS  
12. 133-6824 [1] CYLINDER AS  
13. 4I-8869 [1] STOP  
14. 121-1541 [1] PISTON  
15. 4I-3631 J [2] RING (SEALING)  
16. 4I-3631 J [2] RING (BUCK UP)  
17. 096-1570 J [1] SEAL AS  
18. 126-1877 J [2] RING  
19. 096-1571 J [2] RING  
20. 096-5741 J [1] SHIM (T=0.3mm)  
21. 096-6210 [1] SETSCREW  
22. 4B-9880 [1] BALL  
23. 119-5211 [1] LOCKNUT  
24. 096-4411 [4] SEAL  
25. 3B-8489 [2] FITTING  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  133-6823 [1] SEAL KIT  
  J   INCLUDES PARTS MARKED J
 

#XEBP81100064
 

196-3310: LINES GP-BOOM CYLINDER

1963310 LINES GP-BOOM CYLINDER
PART OF 1963309-Page 138
c964428 XEBP8110
1963310 LINES GP-BOOM CYLINDER Parts scheme 1963310 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-3376 [1] BLOCK  
2. 1P-3704 [2] SEAL (OD=45.00mm)  
3. 096-9986 [8] BOLT (L=55mm)  
4. 190-7752 [1] VALVE GP  
5. 1P-3703 [6] SEAL (OD=38.66mm)  
6. 8T-0341 [8] BOLT (L=60mm)  
7. 196-3378 [1] TUBE AS  
8. 6V-9746 [4] SEAL (ID=18.94mm)  
9. 8T-4195 [16] BOLT (L=30mm)  
10. 196-3380 [1] TUBE AS  
11. 8T-4185 [8] BOLT (L=50mm)  
12. 196-3381 [1] TUBE AS  
13. 196-3379 [1] TUBE AS  
14. 190-7756 [1] VALVE GP  
15. 196-3377 [1] BLOCK  
16. 4I-1674 [4] CLIP  
17. 8T-4139 [4] BOLT (L=30mm)  
18. 8T-4223 [4] WASHER  
19. 196-3382 [1] PLATE  
20. 8T-4136 [4] BOLT (L=25mm)  
21. 8T-4121 [16] WASHER  
22. [2] ELBOW  
23. 6V-8636 [2] CONVERTER  
24. 6V-9836 [2] TEE  
25. 6V-8639 [2] CONVERTER  
26. 7T-7679 [6] PLUG  
27. 2M-9780 [6] SEAL  
28. 5Q-4223 [2] SUPPORT AS  
29. 196-3384 [2] SUPPORT AS  
30. 8T-4196 [4] BOLT (L=35mm)  
31. 6V-9837 [1] TEE  
32. 196-3383 [1] PLATE  
33. 7K-1181 [9] STRAP  
34. 103-1402 [1] HOSE AS  
35. 087-5764 [1] HOSE AS  
36. 4I-0806 [1] HOSE AS  
37. 6V-8397 [10] SEAL (ID=9.27mm)  
38. 3L-1907 [4] SEAL (ID=11.89mm)  
39. 6V-8398 [4] SEAL (ID=12.42mm)  
40. 3K-0360 [2] SEAL (ID=16.36mm)  
41. 6V-8936 [2] REDUCER AS  
 

#XEBP81100065
 

196-3311: LINES GP-BOOM

1963311 LINES GP-BOOM
PART OF 1963309-Page 138
c964430 XEBP8110
1963311 LINES GP-BOOM Parts scheme 1963311 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Q-4237 [1] TUBE AS  
2. 6V-9746 [7] SEAL (ID=18.94mm)  
3. 5Q-4238 [1] TUBE AS  
4. 5K-9090 [2] SEAL (ID=23.52mm)  
5. 5Q-4227 [2] TUBE AS  
6. 135-3966 [1] PIPE AS  
7. 6V-8398 [10] SEAL (ID=12.42mm)  
8. 5Q-4228 [2] TUBE AS  
9. 5Q-4233 [2] PIPE AS  
10. 5Q-4229 [1] TUBE AS  
11. 5Q-4235 [2] PIPE AS  
12. 5Q-4230 [1] TUBE AS  
13. 5Q-4231 [1] PIPE AS  
14. 196-3387 [1] PIPE AS  
15. 196-3386 [1] PIPE AS  
16. 5Q-4239 [1] TUBE AS  
17. 196-3388 [1] BLOCK  
18. 1P-3703 [3] SEAL (ID=38.66mm)  
19. 095-0673 [4] BOLT (L=60mm)  
20. 196-3425 [1] HOSE AS  
21. 5Q-4248 [1] HOSE AS  
22. 196-3429 [1] HOSE AS  
23. 196-3432 [1] HOSE AS  
24. 196-8758 [1] HOSE AS  
25. 5K-0806 [9] STRAP  
26. 6V-8942 [1] REDUCER  
27. 6V-8556 [1] NUT (1-3/16)  
28. 4I-1676 [4] CLIP  
29. 8T-4139 [38] BOLT (L=30mm)  
30. 8T-4223 [38] BOLT (L=30mm)  
31. 135-3980 [6] CLIP  
32. 4I-1674 [4] CLIP  
33. [2] CLIP  
34. 5Q-4213 [16] CLIP  
35. 7Y-4868 [4] CLIP  
36. 7Y-3732 [2] CLIP  
37. 175-6085 [1] FLANGE  
38. 6V-8200 [4] BOLT (L=35mm)  
39. 8T-6876 [1] ELBOW  
40. 190-7759 [1] VALVE GP  
41. 8C-8729 [4] BOLT (L=80mm)  
42. 8T-0077 [1] CONNECTOR  
43. 3K-0360 [1] SEAL (ID=16.36mm)  
44. 8T-5050 [1] CONNECTOR  
45. 3J-1907 [2] SEAL (ID=11.89mm)  
 

#XEBP81100066
 

196-3305: LINES GP-PILOT

1963305 LINES GP-PILOT
CAB RISER
PART OF 2238766-Page 106
c964432 XEBP8110
1963305 LINES GP-PILOT Parts scheme 1963305 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-3471 [1] HOSE AS  
2. 196-3474 [1] HOSE AS  
3. 196-3477 [8] HOSE AS  
4. 196-3480 [2] HOSE AS  
5. 196-3483 [2] HOSE AS  
6. 6V-8625 [1] ELBOW  
7. 6V-8639 [1] CONNECTOR  
8. 6V-9001 [2] ELBOW  
9. 6V-8636 [10] CONNECTOR  
10. 6V-8994 [12] UNION  
11. 6V-9168 [12] NUT  
12. 6V-8995 [2] UNION  
13. 6V-9169 [2] NUT  
14. 115-8645 [2] GUARD  
15. 7K-1181 [4] STRAP  
16. 196-3407 [1] SUPPORT  
17. 196-3408 [1] SUPPORT  
18. 196-3486 [1] BRACKET  
19. 134-5395 [2] BRACKET AS  
20. 135-0155 [1] BRACKET AS  
21. 134-5397 [2] STRIP  
22. 135-0158 [1] STRIP  
23. 6V-0683 [2] GROMMET  
24. 7V-6571 [12] GROMMET  
25. 8T-4138 [8] BOLT (L=20mm)  
26. 9X-8256 [8] WASHER  
27. 8T-4136 [12] BOLT (L=25mm)  
28. 8T-4121 [12] WASHER  
29. 8T-4192 [2] BOLT (L=25mm)  
30. 8T-4223 [2] WASHER  
31. 4I-9521 [4] BAND  
32. 4I-9522 [8] BAND  
33. 4I-9523 [4] BAND  
34. 4I-9524 [2] BAND  
35. 4I-9525 [6] BAND  
36. 4I-9526 [6] BAND  
37. 4I-9527 [2] BAND  
38. 4I-9528 [2] BAND  
39. 6V-8398 [6] SEAL (ID=12.42mm)  
40. 3K-0360 [2] SEAL (ID=16.36mm)  
41. 6V-8397 [36] SEAL (ID=9.27mm)  
42. 3J-1907 [12] SEAL (ID=11.89mm)  
 

#XEBP81100067
 

196-3312: LINES GP-AUXILIARY

1963312 LINES GP-AUXILIARY
PART OF 2532753-Page 147
PART OF 5Q2521-Page 147
c966365 XEBP8110
1963312 LINES GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP  
2. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW (90 DEG)  
  6V-9746 [1] SEAL-O-RING  
3. 189-6236 [2] FLANGE  
4. 6V-9746 [2] SEAL-O-RING  
5. 1P-3703 [2] SEAL (RECTANGULAR)  
6. 3E-6911 M [8] BOLT (HEX SOCKET HEAD)  
7. 148-8392 [1] ELBOW AS (EACH INCLUDES)  
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW (90 DEG)  
8. 196-3496 [1] HOSE AS  
9. 196-3500 [1] HOSE AS  
10. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW (SWIVEL)  
11. 115-3780 [1] HOSE AS  
12. 148-8444 [1] TEE AS  
  6V-8398 [2] SEAL-O-RING  
  6V-9837 [1] TEE (SWIVEL)  
13. 8T-4223 [8] WASHER (HARD)  
14. 6V-8946 [2] REDUCER AS  
15. 5K-9090 [2] SEAL-O-RING  
  M   METRIC PART
 

#XEBP81100068
 

251-8483: MOTOR GP-HYDRAULIC GENERATOR

2518483 MOTOR GP-HYDRAULIC GENERATOR
PART OF 1871296-Page 151
c966366 XEBP8110
2518483 MOTOR GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0940 [1] RING (RETAINING)  
2. 253-3458 [1] COVER  
3. 8U-2564 [1] SEAL  
4. 253-3462 [1] SEAL-O-RING  
5. 117-8183 [1] RING (RETAINING)  
6. 117-8801 [1] SEAL-O-RING  
7. 179-0202 M [4] BOLT (L=65)  
  M   METRIC PART
 

#XEBP81100069
 

160-5885: VALVE GP-FLOW CONTROL AND RELIEF

1605885 VALVE GP-FLOW CONTROL AND RELIEF
PART OF 1871296-Page 151
c966367 XEBP8110
1605885 VALVE GP-FLOW CONTROL AND RELIEF Parts scheme
  For full view, you need register

Parts for your 320C FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] VALVE (NEEDLE)  
2. 160-2773 [1] RETAINER  
3. [1] VALVE GP (FLOW CONTROL)  
4. 160-3508 [1] SPRING  
5. 170-5715 [2] SEAL-O-RING  
6. [1] VALVE GP (RELIEF)  
7. 160-3512 [1] VALVE GP (NEEDLE)  
  196-7224 [1] KIT (SEAL)  
8. [1] VALVE GP (FLOW CONTROL)  
9. [1] COIL AS  
10. [1] KIT (SEAL)  
11. [1] VALVE GP (CHECK)  
12. 180-7106 [1] VALVE GP (SOLENOID)  
  195-8513 [1] KIT (SEAL)  
13. 180-7107 [1] COIL  
14. 180-7108 [1] PLUG (ORIFICE)  
15. 9S-8002 [1] PLUG  
16. 9S-8005 [5] PLUG  
17. 9S-8008 [2] PLUG  
18. 184-1291 [2] CONNECTOR (24 VOLT)  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder Lines
320C Forest Machine Machine System Specifications
Boom Cylinder Lines - Right Hand
320C Forest Machine Machine System Specifications
Boom Cylinder
320C Forest Machine Machine System Specifications
Boom Lines
320C Forest Machine Machine System Specifications
Stick Cylinder
320C Forest Machine Machine System Specifications
Boom Cylinder
320C Forest Machine Machine System Specifications
Stick Cylinder
320C Forest Machine Machine System Specifications
Heel Cylinder
320C Forest Machine Machine System Specifications
Lines (Heel Cylinder)
320C Forest Machine Machine System Specifications
Cab Tilt Cylinder
320C Forest Machine Machine System Specifications
Boom Cylinder Lines - Right Hand
320C Forest Machine Machine System Specifications
Boom Cylinder Lines - Left Hand
320C Forest Machine Machine System Specifications
Boom Cylinder
320C Forest Machine Machine System Specifications
Bucket Cylinder
320C Forest Machine Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinder (Boom, Stick and Heel)
320C and 322C Forest Machines Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Custom Service Information
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Testing and Adjusting
Cylinder Drift - Check
320C Forest Machine Hydraulic System
Cylinder Speed - Check
320C Forest Machine Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove
320C Forest Machine Machine Systems
Stick Cylinder - Install
320C Forest Machine Machine Systems
Boom Cylinder - Remove
320C Forest Machine Machine Systems
Boom Cylinder - Install
320C Forest Machine Machine Systems
Grapple Cylinder - Remove
320C Forest Machine Machine Systems
Heel Cylinder - Disassemble
320C Forest Machine Machine Systems
Heel Cylinder - Remove
320C Forest Machine Machine Systems
Heel Cylinder - Install
320C Forest Machine Machine Systems
Stick Cylinder - Disassemble
320C Forest Machine Machine Systems
Boom Cylinder - Disassemble
320C Forest Machine Machine Systems
Boom Cylinder - Assemble
320C Forest Machine Machine Systems
Heel Cylinder - Assemble
320C Forest Machine Machine Systems
Grapple Cylinder - Install
320C Forest Machine Machine Systems
Stick Cylinder - Assemble
320C Forest Machine Machine Systems
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Summary of the New Seals for Hydraulic Cylinder Rods {5456, 5457, 5458}
2003/11/17
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
The Interference Between the Cable Assembly and the Counterbalance Valve for the Cab Riser Cylinder Is Eliminated {5104, 5811}
2004/11/22
New Seals Are Available for the Prevention of Oil Leaks in Cold Temperature Conditions {5456, 5457, 5458}
2006/09/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2010/10/12

Caterpillar Parts SIS Catalog 320C FM :

LINES GP-STICK
5Q-3993 LINES GP-STICK
LINES GP-RETURN
223-8849 LINES GP-RETURN
LINES GP-PILOT
196-3320 LINES GP-PILOT
LINES GP-PILOT
196-3319 LINES GP-PILOT
PUMP AND MOUNTING GP
200-3365 PUMP AND MOUNTING GP
PUMP AND MOUNTING GP
196-3314 PUMP AND MOUNTING GP
LINES GP-PILOT
223-8734 LINES GP-PILOT
LINES GP-PILOT
237-1244 LINES GP-PILOT
LINES GP-STICK CYLINDER
123-2082 LINES GP-STICK CYLINDER
CYLINDER AND SEAL GP-BOOM
123-2081 CYLINDER AND SEAL GP-BOOM
CYLINDER AND SEAL GP-BOOM
133-6770 CYLINDER AND SEAL GP-BOOM
LINES GP-BOOM CYLINDER
196-3310 LINES GP-BOOM CYLINDER
LINES GP-BOOM
196-3311 LINES GP-BOOM
LINES GP-PILOT
196-3305 LINES GP-PILOT
LINES GP-AUXILIARY
196-3312 LINES GP-AUXILIARY
MOTOR GP-HYDRAULIC GENERATOR
251-8483 MOTOR GP-HYDRAULIC GENERATOR

Truck sale:

 
 
Caterpillar 320C FM
- Knuckleboom loaders
WESTERN STATES EQUIPMENT
 
56,000 
Caterpillar 320CFMST, Construction
- Petroleum Engines

 
48.000 
Caterpillar 320CFMST, Andere, Bau-Und Bergbauausrüstung
- Petroleum Engines

Caterpillar 320C FM, Forestry Equipment
 
Caterpillar 320C FM, Forestry Equipment
- Knuckleboom loaders
WESTERN STATES EQUIPMENT
 
 
Caterpillar 320C FM, Forestry Equipment
- Knuckleboom loaders
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.