2300425 CYLINDER AND LINES GP-BLADE RH 315C EXCAVATOR

230-0425: CYLINDER AND LINES GP-BLADE RH

2300425 CYLINDER AND LINES GP-BLADE RH

Parts for your 315C EXCAVATOR:

Part No	Qty	Parts name
230-0596 Y	[1]	CYL GP (SEAL AND)
237-3272 Y	[1]	LINES GP (CYL)
Y		SEPARATE ILLUSTRATION

230-0592: CYLINDER AND SEAL GP-BLADE

CYLINDER AND SEAL GP-BLADE

2300592 CYLINDER AND SEAL GP-BLADE (LH)
PART OF 2300424 CYL GP-LINES AND (LH)

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-0593 Y	[1]	CYLINDER GP
2.	093-1433	[4]	SEAL
3.	3B-8489	[2]	FITTING
	Y		SEPARATE ILLUSTRATION

230-0596: CYLINDER AND SEAL GP-BLADE

CYLINDER AND SEAL GP-BLADE

2300596 CYLINDER AND SEAL GP-BLADE (RH)
PART OF 2300425 CYL GP-LINES AND (RH)

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-0597 Y	[1]	CYLINDER GP
2.	093-1433	[4]	SEAL
3.	3B-8489	[2]	FITTING
	Y		SEPARATE ILLUSTRATION

160-1994: GUARD GP-CYLINDER

GUARD GP-CYLINDER

1601994 GUARD GP-CYLINDER

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	160-1995	[1]	COVER
2.	160-1996	[1]	COVER
3.	8T-4192	[6]	BOLT
4.	5P-1076	[6]	WASHER

180-4985: ACTUATOR GP-PUMP

ACTUATOR GP-PUMP

1804985 ACTUATOR GP-PUMP
PART OF 2016037 PUMP GP-MAIN HYDRAULIC

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	190-7674	[2]	SEAL
2.	173-3389	[2]	STOPPER
3.	192-2376	[1]	PIN AS
4.	185-0347	[2]	RING (BACKUP)
5.	192-2374	[1]	LEVER AS
	094-1875	[1]	DOWEL
6.	174-7213	[1]	PISTON
7.	174-7220	[2]	COVER
8.	8T-4132	[2]	NUT
9.	200-3255	[1]	NUT
10.	200-3254	[1]	NUT
11.	173-3411	[1]	SETSCREW
12.	173-3387	[1]	ADJUSTER
13.	174-7222	[1]	COVER
14.	176-8133	[1]	GUIDE
15.	174-7221	[1]	COVER
16.	176-0578	[1]	SPOOL AS
17.	185-0172	[1]	RETAINER
18.	8T-4183	[8]	BOLT
19.	8T-4192	[2]	BOLT
20.	3D-2891	[1]	BALL
21.	190-4896	[2]	PLUG
22.	9S-8001	[8]	PLUG
23.	4J-7533	[8]	SEAL
24.	176-0577	[1]	PIN
25.	3J-1907	[1]	SEAL
26.	094-1881	[1]	PLATE
27.	095-1527	[1]	SEAL
28.	6V-5391	[1]	SEAL
29.	099-6109 B	[2]	SHIM
	099-6110 B	[2]	SHIM
	099-6113 B	[2]	SHIM
	099-6115 B	[2]	SHIM
	099-6111 B	[2]	SHIM
	099-6112 B	[2]	SHIM
	099-3669 B	[2]	SHIM
30.	099-3671	[1]	SPRING
31.	165-3879	[1]	SETSCREW
32.	095-1538	[1]	SEAL
33.	180-4990	[1]	SPRING
34.	180-4989	[1]	SPRING
35.	184-2567	[1]	SPRING
36.	095-1519	[1]	SEAL
	B		USE AS REQUIRED

230-0426: LINES GP-BLADE

LINES GP-BLADE

2300426 LINES GP-BLADE (ANGLE, TILT)

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-8342	[1]	CONNECTOR AS
	6V-8632	[1]	CONNECTOR
	3K-0360	[1]	SEAL-O-RING (PORT SIDE)
	7J-9108	[1]	SEAL-O-RING (FACE SIDE)
2.	150-4048	[1]	ELBOW AS
	6V-8722	[1]	ELBOW
	3K-0360	[1]	SEAL-O-RING (PORT SIDE)
	7J-9108	[1]	SEAL-O-RING (FACE SIDE)
3.	148-8374	[4]	ELBOW AS
	6V-8723	[4]	ELBOW
	3K-0360	[4]	SEAL-O-RING (PORT SIDE)
	6V-8397	[4]	SEAL-O-RING (FACE SIDE)
4.	148-8364	[2]	ELBOW AS
	6V-8625	[2]	ELBOW
	3K-0360	[2]	SEAL-O-RING (PORT SIDE)
	6V-8398	[2]	SEAL-O-RING (FACE SIDE)
5.	142-1070	[1]	HOSE AS
6.	121-6269	[1]	HOSE AS
7.	187-5804	[1]	HOSE AS
8.	223-7048	[1]	HOSE AS
9.	187-5833	[1]	HOSE AS
10.	125-1761	[1]	HOSE AS
11.	108-7118	[1]	GROMMET
12.	148-8315	[6]	CONNECTOR AS
	6V-8642	[6]	CONNECTOR
	2M-9780	[6]	SEAL-O-RING (PORT SIDE)
	7J-9108	[6]	SEAL-O-RING (FACE SIDE)
13.	148-8340	[6]	CONNECTOR AS
	6V-8639	[6]	CONNECTOR
	3K-0360	[6]	SEAL-O-RING (PORT SIDE)
	6V-8398	[6]	SEAL-O-RING (FACE SIDE)
14.	242-6409	[1]	BLOCK
15.	237-3510	[4]	TUBE AS
16.	093-1295	[2]	CLAMP
17.	242-6410	[2]	PLATE AS
18.	202-1691	[2]	HOSE AS
19.	108-7565	[2]	HOSE AS
20.	242-6397	[2]	TUBE AS
21.	242-6399	[2]	TUBE AS
22.	096-5766	[2]	CLAMP
23.	5P-7464	[4]	CLIP
24.	5P-7465	[4]	CLIP
25.	6V-1249	[4]	GROMMET
26.	196-3369	[2]	HOSE AS
27.	6D-4244	[2]	CLIP
28.	193-9913	[2]	HOSE AS
29.	242-6401	[1]	TUBE AS
30.	242-6403	[1]	TUBE AS
31.	242-6402	[2]	HOSE AS
32.	242-6405	[2]	TUBE AS
33.	148-8318	[4]	CONNECTOR AS
	6V-8634	[4]	CONNECTOR
	3K-0360	[4]	SEAL-O-RING (PORT SIDE)
	6V-8397	[4]	SEAL-O-RING (FACE SIDE)
34.	242-6458	[1]	HOSE AS
35.	242-6459	[1]	HOSE AS
36.	5P-7462	[3]	CLIP
37.	5P-7463	[3]	CLIP
38.	6V-0683	[3]	GROMMET
39.	242-6420	[1]	PLATE AS
40.	242-6423	[1]	PLATE AS
41.	242-6414	[1]	PLATE AS
42.	242-6417	[1]	PLATE AS
43.	6S-9052	[1]	GUARD
44.	8T-1885	[14]	CLIIP
45.	8T-1886	[14]	CLIP
46.	8T-4137	[10]	BOLT
47.	8T-4136	[16]	BOLT
48.	8T-4182	[2]	BOLT
49.	8T-4172	[2]	BOLT
50.	8T-4192	[7]	BOLT
51.	8T-4183	[8]	BOLT
52.	8T-4194	[2]	BOLT
53.	8T-4956	[4]	BOLT
54.	8T-4121	[30]	WASHER
55.	8T-4223	[9]	WASHER
56.	5P-1076	[12]	WASHER
57.	242-6396	[2]	PLATE AS
58.	7J-9108	[2]	SEAL
59.	6V-8397	[8]	SEAL
60.	148-8415	[2]	REDUCER AS
	6V-8636	[2]	REDUCER
	6V-8397	[2]	SEAL-O-RING (HOSE SIDE)
	6V-8398	[2]	SEAL-O-RING (PIPE SIDE)

230-0427: LINES GP-CYLINDER

LINES GP-CYLINDER

2300427 LINES GP-CYLINDER

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	193-9994	[1]	HOSE AS
2.	148-8357	[1]	ELBOW AS
	6V-9008	[1]	ELBOW
	7M-8485	[1]	SEAL-O-RING (PORT SIDE)
	5K-9090	[1]	SEAL-O-RING (FACE SIDE)
3.	6V-9833	[1]	CAP AS
4.	153-6236	[1]	REDUCER AS
5.	148-8352	[1]	ELBOW AS
	6V-9854	[1]	ELBOW
	5K-9090	[2]	SEAL-O-RING (FACE SIDE)
6.	164-6858	[1]	TEE AS
	6V-8778	[1]	TEE
	7M-8485	[1]	SEAL-O-RING (PORT SIDE)
	5K-9090	[2]	SEAL-O-RING (FACE SIDE)
7.	6V-0852	[1]	CAP
8.	164-5567	[1]	NIPPLE AS
9.	148-8447	[1]	TEE AS
	7X-0872	[1]	TEE
	7J-9108	[2]	SEAL-O-RING (FACE SIDE)
	3J-1907	[1]	SEAL-O-RING (PORT SIDE)
10.	134-6838	[1]	GUARD
11.	193-9981	[1]	HOSE AS
12.	153-6232	[1]	ELBOW AS
	8T-0120	[1]	ELBOW
	3D-2824	[1]	SEAL-O-RING (PORT SIDE)
	7J-9108	[1]	SEAL-O-RING (FACE SIDE)
13.	148-8335	[1]	CONNECTOR AS
	6V-8635	[1]	CONNECTOR
	7M-8485	[1]	SEAL-O-RING (PORT SIDE)
	5K-9090	[4]	SEAL-O-RING (FACE SIDE)
14.	7K-1181	[8]	STRAP
15.	199-2046	[1]	GUARD
16.	193-9978	[1]	HOSE AS
17.	198-2101	[2]	HOSE AS
18.	148-8393	[1]	ELBOW AS
	6V-9852	[1]	ELBOW
	7J-9108	[2]	SEAL-O-RING (FACE SIDE)
19.	148-8342	[4]	CONNECTOR AS
	6V-8632	[4]	CONNECTOR
	3K-0360	[4]	SEAL-O-RING (PORT SIDE)
	7J-9108	[4]	SEAL-O-RING (FACE SIDE)
20.	148-8315	[1]	CONNECTOR AS
	6V-8642	[1]	CONNECTOR
	2M-9780	[1]	SEAL-O-RING (PORT SIDE)
	7J-9108	[1]	SEAL-O-RING (FACE SIDE)
21.	229-4361	[1]	HOSE AS
22.	148-8370	[1]	ELBOW AS
	6V-9851	[1]	ELBOW
	6V-8398	[2]	SEAL-O-RING (FACE SIDE)
23.	148-8340	[4]	CONNECTOR AS
	6V-8639	[4]	CONNECTOR
	3K-0360	[4]	SEAL-O-RING (PORT SIDE)
	6V-8398	[4]	SEAL-O-RING (FACE SIDE)
24.	126-9642	[1]	HOSE AS
25.	202-3617	[1]	HOSE AS
26.	148-8367	[1]	ELBOW AS
	6V-9850	[1]	ELBOW
	6V-8397	[2]	SEAL-O-RING (FACE SIDE)
27.	148-8318	[4]	CONNECTOR AS
	6V-8634	[4]	CONNECTOR
	3K-0360	[4]	SEAL-O-RING (PORT SIDE)
	6V-8397	[4]	SEAL-O-RING (FACE SIDE)
28.	204-8458	[1]	HOSE AS
29.	148-8322	[1]	CONNECTOR AS
	6V-8640	[1]	CONNECTOR
	2M-9780	[1]	SEAL-O-RING (PORT SIDE)
	6V-9746	[4]	SEAL-O-RING (FACE SIDE)
30.	229-7479 Y	[1]	VALVE GP
31.	8T-4224	[3]	WASHER
32.	5A-3604	[3]	BOLT
33.	8T-4223	[1]	WASHER
34.	8T-4139	[1]	BOLT
35.	202-3932	[1]	SUPPORT AS
36.	5P-8112	[1]	GROMMET
37.	5P-7467	[1]	CLIP
38.	5P-7466	[1]	CLIP
	Y		SEPARATE ILLUSTRATION

237-3269: LINES GP-BLADE CYLINDER

LINES GP-BLADE CYLINDER

2373269 LINES GP-BLADE CYLINDER (LH)
PART OF 2300424 CYL GP-LINES AND (LH)

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	237-3270	[1]	PIPE AS
2.	4J-5267	[2]	SEAL
3.	8T-4182	[4]	BOLT
4.	8T-4185	[4]	BOLT
5.	139-1773	[1]	ELBOW
6.	7J-9108	[2]	SEAL
7.	093-1291	[1]	CLAMP
8.	8T-4223	[1]	WASHER
9.	8T-4194	[1]	BOLT
10.	122-5420	[1]	SUPPORT AS
11.	122-5500	[1]	SUPPORT AS
12.	8T-4121	[2]	WASHER
13.	8T-4196	[2]	BOLT

237-3272: LINES GP-BLADE CYLINDER

LINES GP-BLADE CYLINDER

2373272 LINES GP-BLADE CYLINDER (RH)
PART OF 2300425 CYL GP-LINES AND (RH)

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	237-3273	[1]	PIPE AS
2.	4J-5267	[2]	SEAL
3.	8T-4182	[4]	BOLT
4.	8T-4185	[4]	BOLT
5.	139-1773	[1]	ELBOW
6.	7J-9108	[2]	SEAL
7.	093-1291	[1]	CLAMP
8.	8T-4223	[1]	WASHER
9.	8T-4194	[1]	BOLT
10.	122-5420	[1]	SUPPORT AS
11.	122-5500	[1]	SUPPORT AS
12.	8T-4121	[2]	WASHER
13.	8T-4196	[2]	BOLT

230-0428: LINES GP-PILOT

LINES GP-PILOT

2300428 LINES GP-PILOT

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8478	[1]	HOSE AS
2.	7K-1181	[6]	STRAP
3.	148-8378	[11]	ELBOW AS
	6V-8724	[11]	ELBOW
	3J-1907	[11]	SEAL-O-RING (PORT SIDE)
	6V-8397	[11]	SEAL-O-RING (FACE SIDE)
4.	7Y-4199	[1]	HOSE AS
5.	148-8336	[3]	CONNECTOR AS
	6V-8636	[3]	CONNECTOR
	3J-1907	[3]	SEAL-O-RING (PORT SIDE)
	6V-8397	[3]	SEAL-O-RING (FACE SIDE)
6.	164-5628	[1]	CONNECTOR AS
	107-6631	[1]	CONNECTOR
	3J-1907	[1]	SEAL-O-RING (PORT SIDE)
	6V-8397	[1]	SEAL-O-RING (FACE SIDE)
7.	2M-9780	[1]	SEAL
8.	9S-8006	[1]	PLUG
9.	226-3156	[1]	SWITCH AS
10.	3S-2093	[1]	STRAP
11.	109-7556	[2]	HOSE AS
12.	148-8433	[1]	TEE AS
	6V-9836	[1]	TEE
	6V-8397	[3]	SEAL-O-RING (FACE SIDE)
13.	148-8435	[7]	TEE AS
	6V-8781	[7]	TEE
	3J-1907	[7]	SEAL-O-RING (PORT SIDE)
	6V-8397	[14]	SEAL-O-RING (FACE SIDE)
14.	4I-9527	[2]	BAND
15.	4I-9528	[2]	BAND
16.	4I-9524	[2]	BAND
17.	162-0177	[2]	PLUG AS
18.	167-3466	[1]	SWITCH AS
19.	087-4503	[1]	HOSE AS
20.	087-5771	[1]	HOSE AS
21.	4I-1878	[1]	HOSE AS
22.	087-4532	[1]	HOSE AS
23.	108-7402	[2]	HOSE AS
24.	4I-1031	[1]	HOSE AS
25.	087-4534	[1]	HOSE AS
26.	148-8374	[1]	ELBOW AS
	6V-8723	[1]	ELBOW
	3K-0360	[1]	SEAL-O-RING (PORT SIDE)
	6V-8397	[1]	SEAL-O-RING (FACE SIDE)
27.	8T-4200	[4]	BOLT
28.	8T-4224	[6]	WASHER
29.	237-3463	[1]	PLATE
30.	8T-4192	[3]	BOLT
31.	8T-4223	[3]	WASHER
32.	196-8281 Y	[2]	VALVE AS
33.	148-8365	[1]	ELBOW AS
		[1]	ELBOW
	3J-1907	[1]	SEAL-O-RING (PORT SIDE)
	6V-8398	[1]	SEAL-O-RING (FACE SIDE)
34.	087-4630	[1]	HOSE AS
35.	150-4043	[1]	CONNECTOR AS
	6V-9873	[1]	CONNECTOR
	3J-1907	[1]	SEAL-O-RING (PORT SIDE)
	6V-8398	[1]	SEAL-O-RING (FACE SIDE)
36.	148-8444	[1]	TEE AS
	6V-9837	[1]	TEE
	6V-8398	[3]	SEAL-O-RING (FACE SIDE)
37.	7X-0818	[2]	BOLT
38.	123-2430	[1]	VALVE GP
39.	6V-8397	[6]	SEAL
40.	123-2549	[2]	VALVE GP
41.	164-5629	[1]	FITTING AS
42.	104-8835	[2]	HOSE AS
43.	087-4411	[1]	HOSE AS
44.	087-6582	[2]	HOSE AS
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER GROUP ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER GROUP ON CERTAIN 315C EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder Lines - Left Hand
315C Excavator Machine System Specifications

Boom Cylinder Lines - Right Hand
315C Excavator Machine System Specifications

Lines (Boom)
315C Excavator Machine System Specifications

Boom Cylinder
315C Excavator Machine System Specifications

Bucket Cylinder
315C Excavator Machine System Specifications

Stick Cylinder
315C Excavator Machine System Specifications

Bucket Cylinder
315C Excavator Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS

Service Letter-Asia

Systems Operation

Cylinders (Boom, Stick and Bucket)
315C Excavator Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS

Testing and Adjusting

Cylinder Drift - Check - Empty Bucket
315C Excavator Hydraulic System

Cylinder Drift - Check - Loaded Bucket
315C Excavator Hydraulic System

Cylinder Speed - Check
315C Excavator Hydraulic System

Bench Test Procedures

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Disassembly and Assembly

Bucket Cylinder - Remove and Install
315C Excavator Machine Systems

Stick Cylinder - Remove and Install
315C Excavator Machine Systems

Boom Cylinder - Remove and Install
315C Excavator Machine Systems

Service Magazine

Correction to Testing and Adjusting , "Cylinder Drift - Check (Empty Bucket) " {7562}
2003/04/21

Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08

New Torque Specification for Locknut of Stick and Bucket Cylinders {5457, 5458}
2004/04/12

New Rod Assemblies in New Bucket Cylinder Groups Have Increased Durability {5457}
2006/11/20

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Correction to Testing and Adjusting , "Cylinder Drift - Check - Empty Bucket" for Certain Excavators {7562}
2008/09/29

A New Bucket Cylinder with Increased Durability Is Available for 315C Excavators {5117, 5457}
2009/05/25

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2010/10/12

Caterpillar Parts SIS Catalog 315C :

Truck sale:

Caterpillar 315C
- Crawler Excavators
WESTERN STATES EQUIPMENT

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.