AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2487855 CYLINDER GP-BUCKET S/N: KDD659~ 330C L EXCAVATOR


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-BOOM
LINES GP-STICK
LINES GP-FRONT
VALVE GP-FLOW CONTROL
IMPLEMENTS
BOOM GP
STICK GP
LINES GP-GREASE
LINKAGE GP

EXCAVATOR 330C L EXCAVATOR KDD
 330 C L SUPPLEMENT FOR EXCAVATOR /70FT LONG REACH/ KDD00001-UP (MACHINE) XEBP8228 330C L KDD   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STICK
234-6394 CYLINDER GP-STICK
CYLINDER GP-STICK
234-6394 CYLINDER GP-STICK
CYLINDER GP-STICK
234-6395 CYLINDER GP-STICK
CYLINDER & SEAL GP-BUCKET
170-9803 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
248-7854 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BUCKET
170-9808 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
248-7855 CYLINDER GP-BUCKET
 

#XEBP82280010
 

248-7855: CYLINDER GP-BUCKET

2487855 CYLINDER GP-BUCKET
S/N: KDD659~
c965991 XEBP8228
2487855 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-9938 [1] CYLINDER AS  
2. 168-0019 [1] BEARING  
3. 143-8149 [1] LOCK NUT  
4. 143-8024 J [1] RING  
5. 9X-7298 J [1] SEAL AS  
6. 143-8033 [1] RING  
7. 143-8025 J [1] RING  
8. 143-8023 [1] PISTON  
9. 099-0596 [1] HEAD  
10. 248-7856 [1] ROD AS  
11. 248-7857 [1] BEARING  
12. 099-0700 [1] RING  
13. 114-0754 [1] BEARING  
14. 170-9840 J [1] SEAL  
15. 170-9856 J [1] SEAL  
16. 096-1055 J [1] RING  
17. 165-9282 J [1] SEAL  
18. 6V-8467 J [1] SEAL  
19. 099-0600 [1] RING  
20. 099-0699 J [1] RING  
21. 095-1625 J [1] SEAL  
    AVAILABLE REPAIR KIT
  170-9941 [1] KIT (SEAL) (NOTE J)  
 

#XEBP82280011
 

250-4719: LINES GP-BOOM

2504719 LINES GP-BOOM
c965994 XEBP8228
2504719 LINES GP-BOOM Parts scheme 2504719 LINES GP-BOOM Parts scheme 2504719 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PIPE  
2. 215-8542 [1] PIPE  
3. 215-8543 [1] PIPE  
4. [1] PIPE  
5. [1] PIPE  
6. 215-8546 [1] PIPE  
7. [1] PIPE  
8. 215-8548 [1] PIPE  
9. 215-8549 [1] PIPE  
10. [2] PIPE  
11. [2] PIPE  
12. [2] PIPE  
13. [1] PIPE  
14. [1] PIPE  
15. [1] PIPE  
16. [1] PIPE  
17. 196-0804 [1] HOSE AS  
18. 196-0498 A [1] HOSE AS  
18. 223-6915 B [1] HOSE AS  
19. 231-8308 Y [1] VALVE  
20. 4I-8789 [2] VALVE GP  
21. 1P-5767 [6] FLANGE  
22. 5P-8077 [4] FLANGE  
23. 250-4718 [1] CONNECTOR  
24. 6V-8635 [2] CONNECTOR  
25. 124-1106 [2] CLIP  
26. 124-1109 [2] CLIP  
27. 196-0482 [24] CLIP  
28. 124-1108 [12] CLIP  
29. 124-1107 [7] GROMMET  
30. 138-5709 [7] GROMMET  
31. 129-5874 [20] GROMMET  
32. 099-0187 [2] SEAL  
33. 189-2624 [2] SEAL  
34. 1P-3704 [11] SEAL (OD=45.0mm)  
35. 1P-3705 [2] SEAL  
36. 5K-9090 [4] SEAL (ID=23.66mm)  
37. 6K-3607 [2] SEAL  
38. 7M-8485 [4] SEAL (ID=29.74mm)  
39. 8T-4956 [10] BOLT (L=35mm)  
40. 8T-4194 [8] BOLT (L=50mm)  
41. 8T-4183 [32] BOLT (L=40mm)  
42. 8T-4184 [12] BOLT (L=45mm)  
43. 8T-4139 [4] BOLT (L=30mm)  
44. 7X-2553 [26] BOLT (L=40mm)  
45. 8T-4140 [16] BOLT (L=60mm)  
46. 8T-4223 [66] WASHER  
47. 9X-8257 [42] WASHER  
  A   S/N: KDD1~658
  B   S/N: KDD659~
  Y   SEPARATE ILLUSTRATION
 

#XEBP82280012
 

250-4720: LINES GP-STICK

2504720 LINES GP-STICK
c965997 XEBP8228
2504720 LINES GP-STICK Parts scheme 2504720 LINES GP-STICK Parts scheme 2504720 LINES GP-STICK Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PIPE  
2. [1] PIPE  
3. [1] PIPE  
4. [1] PIPE  
5. [1] PIPE  
6. 215-8562 [1] PIPE  
7. 250-4721 [2] HOSE AS  
8. 250-4722 [1] HOSE AS  
9. 250-4723 [1] HOSE AS  
10. 124-1108 [24] CLIP  
11. 129-5874 [12] GROMMET  
12. 121-6222 [1] SUPPORT AS  
13. 121-6223 [1] SUPPORT AS  
14. 093-1291 [1] CLAMP  
15. 1P-3704 [4] SEAL (OD=45.0mm)  
16. 5K-9090 [2] SEAL (ID=23.66mm)  
17. 7J-9108 [1] SEAL (ID=15.72mm)  
18. 6V-9746 [1] SEAL (ID=18.94mm)  
19. 4J-5267 [2] SEAL (ID=24.99mm)  
20. 8T-4196 [2] BOLT (L=35mm)  
21. 8T-4182 [4] BOLT (L=45mm)  
22. 8T-4136 [4] BOLT (L=25mm)  
23. 8T-4956 [24] BOLT (L=35mm)  
24. 8T-4194 [1] BOLT (L=50mm)  
25. 8T-4183 [8] BOLT (L=40mm)  
26. 8T-4121 [2] WASHER  
27. 8T-4223 [33] WASHER  
 

#XEBP82280013
 

238-0809: LINES GP-FRONT

2380809 LINES GP-FRONT
c965999 XEBP8228
2380809 LINES GP-FRONT Parts scheme 2380809 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-7997 [1] PIPE  
2. [1] PIPE  
3. 231-8308 Y [1] VALVE  
4. 250-4718 [1] CONNECTOR  
5. 1P-5767 [2] FLANGE  
6. 1P-3703 [1] SEAL (OD=38.66mm)  
7. 1P-3704 [1] SEAL (OD=45.0mm)  
8. 6K-6307 [2] SEAL  
9. 5K-9090 [2] SEAL (ID=23.66mm)  
10. 8T-4184 [6] BOLT (L=45mm)  
11. 8T-4223 [6] WASHER  
12. 131-9547 [2] CLIP  
  Y   SEPARATE ILLUSTRATION
 

#XEBP82280014
 

231-8308: VALVE GP-FLOW CONTROL

2318308 VALVE GP-FLOW CONTROL
c966000 XEBP8228
2318308 VALVE GP-FLOW CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 231-8309 [1] BODY  
2. 231-8310 [1] COVER  
3. 096-5706 [1] POPPET  
4. 096-5704 [1] COLLAR  
5. 096-5705 [1] SPRING  
6. 096-3313 [1] RING  
7. 095-1706 [1] SEAL-O-RING  
8. 095-1705 [1] SEAL-O-RING  
9. 099-0019 [1] RING  
10. 096-2089 [1] RING (BACKUP)  
 

#XEBP82280015
 

250-4724: BOOM GP

2504724 BOOM GP
c966002 XEBP8228
2504724 BOOM GP Parts scheme 2504724 BOOM GP Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 234-6396 [1] BODY AS  
2. 192-8261 [2] BEARING  
3. 113-2963 [1] PIN AS  
4. 250-2440 [1] PIN AS  
5. 192-8321 [1] PIN  
6. 4I-5005 [2] PLATE  
7. 8T-4780 [1] BOLT (L=30mm)  
8. 7X-2573 [1] BOLT  
9. 8T-4779 [6] BOLT  
10. 4I-4978 [2] SPACER  
11. 093-0366 [1] SPACER  
12. 9X-8257 [6] WASHER  
13. 093-0349 [1] WASHER  
14. 8T-4123 [1] WASHER  
15. 201-2771 [1] WASHER  
16. 8T-4167 [1] WASHER  
17. 093-0084 [1] SHIM (T=1.0mm)  
18. 133-2426 [1] SHIM (T=0.5mm)  
19. 093-0116 [1] SHIM (T=2.0mm)  
20. 093-0074 [1] SHIM (T=1.0mm)  
21. 147-3957 [1] SHIM (T=0.5mm)  
22. 166-1490 [1] SHIM (T=2.0mm)  
23. 166-1498 [2] SEAL  
 

#XEBP82280016
 

250-4725: STICK GP

2504725 STICK GP
c966004 XEBP8228
2504725 STICK GP Parts scheme 2504725 STICK GP Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 250-4726 [1] STICK AS  
2. 229-1091 [2] BEARING  
3. 229-1095 [2] BEARING  
4. 192-8261 [2] BEARING  
5. 127-3913 [1] PIN AS  
6. 113-2963 [1] PIN AS  
7. 8T-4179 [1] BOLT (L=20mm)  
8. 8T-4780 [1] BOLT (L=30mm)  
9. 093-0366 [1] SPACER  
10. 093-0357 [1] WASHER  
11. 086-0297 [1] WASHER  
12. 093-0349 [1] WASHER  
13. 8T-4123 [1] WASHER  
14. 3B-8489 [2] FITTING  
15. 099-7091 B [1] SHIM (T=1.5mm)  
16. 093-0097 B [1] SHIM (T=2.0mm)  
17. 093-0065 B [1] SHIM (T=1.0mm)  
18. 093-0084 B [1] SHIM (T=1.0mm)  
19. 133-2426 B [1] SHIM (T=0.5mm)  
20. 093-0116 B [1] SHIM (T=2.0mm)  
21. 096-0131 [2] SEAL  
22. 093-1433 [2] SEAL  
23. 166-1498 [2] SEAL  
  B   USE AS REQUIRED
 

#XEBP82280017
 

250-4727: LINES GP-GREASE

2504727 LINES GP-GREASE
c966006 XEBP8228
2504727 LINES GP-GREASE Parts scheme 2504727 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-2829 [1] TUBE AS  
2. 212-2830 [1] TUBE AS  
3. 120-7224 [1] HOSE AS  
4. 134-9137 [1] HOSE AS  
5. 5Q-3541 [1] HOSE AS  
6. 8M-2772 [2] CLIP  
7. 8T-4191 [15] BOLT (L=16mm)  
8. 8T-4121 [19] WASHER  
9. 033-8248 [13] CLIP  
10. 3B-8489 [5] FITTING  
11. 6L-3616 [2] CONNECTOR  
12. 5H-8936 [1] ADAPTER  
13. 5K-9243 [2] ELBOW  
14. 166-1579 [4] CLIP  
15. 8T-4133 [4] NUT  
 

#XEBP82280018
 

250-4728: LINES GP-GREASE

2504728 LINES GP-GREASE
c966009 XEBP8228
2504728 LINES GP-GREASE Parts scheme 2504728 LINES GP-GREASE Parts scheme 2504728 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-9756 [1] HOSE AS  
2. 5Q-3550 [1] TUBE AS  
3. 5Q-3549 [5] TUBE AS  
4. 5Q-4138 [1] TUBE AS  
5. [1] PIPE  
6. [1] PIPE  
7. 215-8565 [1] PIPE  
8. 7Y-2920 [1] HOSE  
9. 8M-2772 [33] CLIP  
10. 8T-4191 [34] BOLT (L=16mm)  
11. 8T-4121 [34] WASHER  
12. 033-8248 [1] CLIP  
13. 3B-8489 [5] FITTING  
14. 6L-3616 [5] CONNECTOR  
15. 5M-8936 [1] ADAPTER  
16. 6V-3342 [1] ELBOW  
17. 5K-9243 [2] ELBOW  
18. 5K-9242 [10] UNION  
19. 5Q-4139 [1] TUBE AS  
20. 5Q-4140 [3] TUBE AS  
 

#XEBP82280019
 

168-0011: LINKAGE GP-BUCKET

1680011 LINKAGE GP-BUCKET
S/N: KDD1~658
XEBP82280019 XEBP8228
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  198-5734 Y [1] LINKAGE GP (BUCKET)  
  198-5735 Y [1] LINKAGE GP (BUCKET)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Inspection Procedure for Boom Cylinder Assembly Cracks on Certain 330B, 330C, 345B, 345C, and 345D Excavators {5456, 7562}
Inspection Procedure for Boom Cylinder Assembly Cracks on Certain 330B, 330C, 345B, 345C, and 345D Excavators {5456, 7562}
Technical Information Bulletin
The Stick Cylinder May Leak Hydraulic Fluid On Certain Excavators
The Stick Cylinder May Leak Hydraulic Fluid On Certain Excavators
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Specifications
Boom Cylinder
330C Excavator Machine System Specifications
Boom Cylinder Lines
330C Excavator Machine System Specifications
Boom Lines
330C Excavator Machine System Specifications
Bucket Cylinder
330C Excavator Machine System Specifications
Stick Cylinder
330C Excavator Machine System Specifications
Bucket Cylinder
330C Excavator Machine System Specifications
Stick Cylinder
330C Excavator Machine System Specifications
Stick Cylinder
330C Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
330C Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Custom Service Information
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Testing and Adjusting
Cylinder Drift - Check - Loaded Bucket
330C Excavator Hydraulic System
Cylinder Speed - Check
330C Excavator Hydraulic System
Cylinder Drift - Check - Empty Bucket
330C Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove and Install
330C Excavator Machine Systems
Stick Cylinder - Install
330C Excavator Machine Systems
Boom Cylinder - Install
330C Excavator Machine Systems
Boom Cylinder - Remove
330C Excavator Machine Systems
Stick Cylinder - Remove
330C Excavator Machine Systems
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Summary of the New Seals for Hydraulic Cylinder Rods {5456, 5457, 5458}
2003/11/17
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
The Straight Travel Control Spool Has Been Improved {5051, 5457}
2004/06/21
The Strength of the Bucket Cylinder Rod Is Increased {5457}
2004/11/15
The Strength of the Rod Assembly for the Boom Cylinder Is Increased {5456}
2004/10/11
New Seals Are Available for the Prevention of Oil Leaks in Cold Temperature Conditions {5456, 5457, 5458}
2006/09/25
Improved Welds on New Stick Cylinders Prevent Leaks {5458}
2007/03/05
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
Improved Seal Kits are Now Used on Certain Excavators {5456, 5457, 5458}
2011/11/18
A Procedure to Inspect the Boom Cylinder Assembly is Available for Certain Excavators and Mobile Hydraulic Power Units {5456}
A Procedure to Inspect the Boom Cylinder Assembly is Available for Certain Excavators and Mobile Hydraulic Power Units {5456}

Caterpillar Parts SIS Catalog 330C L :

CYLINDER GP-BUCKET
170-9808 CYLINDER GP-BUCKET
CYLINDER & SEAL GP-BUCKET
248-7854 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
170-9803 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-STICK
234-6395 CYLINDER GP-STICK
CYLINDER GP-STICK
234-6394 CYLINDER GP-STICK
CYLINDER GP-STICK
234-6394 CYLINDER GP-STICK
LIGHTING GP-BOOM
193-3385 LIGHTING GP-BOOM
219-0152 LINKAGE AR-FRONT
LINES GP-BOOM
250-4719 LINES GP-BOOM
LINES GP-STICK
250-4720 LINES GP-STICK
LINES GP-FRONT
238-0809 LINES GP-FRONT
VALVE GP-FLOW CONTROL
231-8308 VALVE GP-FLOW CONTROL
BOOM GP
250-4724 BOOM GP
STICK GP
250-4725 STICK GP
LINES GP-GREASE
250-4727 LINES GP-GREASE
LINES GP-GREASE
250-4728 LINES GP-GREASE

Truck sale:

 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
Caterpillar 330CL, Crawler Excavators, Construction
55,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.
Caterpillar 330CL, Crawler Excavators, Construction
48,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT
Caterpillar 330CL
 
Caterpillar 330CL
- Crawler Excavators
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.