AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2280320 CYLINDER GROUP-ANGLE-102mm BORE X 472mm STROKE PART OF 2236303-Page 457, 2236304-Page 457 AN ATTACHMENT D6N


HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
BULLDOZER GP
C-FRAME GP

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR CBL
 D6N TRACK-TYPE TRACTOR PS DS XL/PS DS LGP CBL00001-UP (MACHINE) POWERED BY 3126B ENGINE XEBP8507 D6N CBL   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GROUP-LIFT
110-3269 CYLINDER GROUP-LIFT
CYLINDER GROUP-TILT
160-0054 CYLINDER GROUP-TILT
CYLINDER GROUP-TILT
115-3523 CYLINDER GROUP-TILT
CYLINDER GROUP-ANGLE
228-0320 CYLINDER GROUP-ANGLE
CYLINDER GROUP-RIPPER LIFT
9T-2716 CYLINDER GROUP-RIPPER LIFT
CYLINDER GROUP-RIPPER LIFT
227-0842 CYLINDER GROUP-RIPPER LIFT
 

#XEBP85070530
 

228-0320: CYLINDER GROUP-ANGLE

2280320 CYLINDER GROUP-ANGLE-102mm BORE X 472mm STROKE
PART OF 2236303-Page 457, 2236304-Page 457
AN ATTACHMENT
j122081 XEBP8507
2280320 CYLINDER GROUP-ANGLE Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2175 [1] BOLT (1-1/8-7X3.5-IN)  
2. 110-6501 [1] WASHER-HARD (31X57X6-MM THK)  
3. 122-9921 [1] PISTON AS  
3A. 8C-9160 [1] SEAL AS  
3B. 8N-5083 [1] SPRING  
3C. 112-6142 [1] PLUNGER  
3D. 122-9918 [1] SPACER (8X14.07X28.67-MM THK)  
4. 175-7900 J [1] SEAL-O-RING  
5. 2K-6830 J [1] RING-BACKUP  
6. 135-7393 [1] HEAD AS  
  167-2457 [1] SEAL-WIPER  
7. 228-0321 [1] ROD AS  
7A. 2H-5549 [2] RING-RETAINING  
7B. 4D-4431 [1] BEARING-ALIGNING  
8. 229-9382 J [1] SEAL-WIPER  
9. 167-2304 J [1] SEAL-U-CUP  
10. 167-2195 J [1] SEAL AS-BUFFER  
11. 110-3787 R [1] CYLINDER AS  
11A. 9T-7045 [1] ELBOW  
11B. 2H-5549 [2] RING-RETAINING  
11C. 4D-4431 [1] BEARING-ALIGNING  
12. 4T-5613 J [1] RING-WEAR  
13. 6J-2797 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
   
  240-9538 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PARTS MARKED J
 

#XEBP85070531
 

9T-2716: CYLINDER GROUP-RIPPER LIFT

9T2716 CYLINDER GROUP-RIPPER LIFT-127mm BORE X 362mm STROKE
EFFECTIVE WITH SERIAL NO. CBL00001-CBL00405, CCS00001-CCS00408
PART OF 1804560-Page 463
AN ATTACHMENT
j127749 XEBP8507
9T2716 CYLINDER GROUP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] WEAR RING  
3. 5J-5020 [1] SEAL ASSEM.  
4. 9T-2715 [1] CYLINDER ASSEM.  
5. 4K-3128 [2] BEARING  
6. 9T-6863 [1] HEAD  
7. 8C-3839 [1] SEAL ASSEM.  
8. 5J-0964 [1] SEAL  
9. 8C-3840 [1] SEAL  
10. 9T-2714 [1] ROD ASSEM.  
11. 2K-4507 [1] BEARING  
12. 1D-4628 [4] BOLT (7/8-9)  
  5P-8249 [4] WASHER  
13. 2K-4096 [1] RING  
14. 5F-3144 [1] SEAL  
15. 3G-1757 [1] WASHER  
16. 2J-0564 [1] NUT (2-12)  
17. 8T-5668 [1] WEAR RING  
18. 1P-4576 C [4] FLANGE  
19. 8T-4896 C [8] WASHER  
20. 5S-7382 C [8] BOLT (3/8-16)  
  C   INDICATES CHANGE
 

#XEBP85070532
 

227-0842: CYLINDER GROUP-RIPPER LIFT

2270842 CYLINDER GROUP-RIPPER LIFT-127mm BORE X 362mm STROKE
EFFECTIVE WITH SERIAL NO. CBL00406-, CCS00409-
PART OF 1804560-Page 464
AN ATTACHMENT
j138599 XEBP8507
2270842 CYLINDER GROUP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-4873 [1] CYLINDER AS  
  4K-3128 [2] BEARING  
2. 2J-0564 [1] NUT (2-12)  
3. 3G-1753 [1] PISTON  
4. 4J-3420 [1] WEAR RING  
5. 5J-5020 [1] SEAL AS  
6. 3G-1757 [1] WASHER  
7. 2K-4096 [1] RING  
8. 5F-3144 [1] SEAL  
9. 9T-2714 [1] ROD AS  
10. 2K-4507 [1] BEARING  
11. 8T-5668 [1] RING  
12. 167-2201 [1] SEAL AS  
13. 167-2312 [1] SEAL  
14. 225-3281 [1] SEAL  
15. 6V-8237 [4] WASHER  
16. 173-9779 [4] BOLT (M24X3)  
17. 1P-4576 [4] FLANGE  
18. 8T-4196 [8] BOLT (M10X1.5)  
19. 8T-4121 [8] WASHER  
20. 230-4872 [1] HEAD  
 

#XEBP85070533
 

223-6303: BULLDOZER ARRANGEMENT

BULLDOZER ARRANGEMENT (2236303 N/S)-POWER ANGLE AND TILT
EFFECTIVE WITH SERIAL NO. CBL00001-
AN ATTACHMENT
XEBP85070533 XEBP8507
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-3269 [2] CYLINDER GROUP (LIFT)  
  110-5226 [1] C-FRAME GROUP  
  110-5230 [1] ANGLING BLADE GROUP  
  110-6113 [1] ANGLE AND TILT LINES GROUP  
  134-6775 [1] PIN GROUP  
  160-0054 [1] CYLINDER GROUP (TILT)  
  190-5328 [1] LINK GROUP  
  220-0897 [1] LIFT CYLINDER LINES GROUP  
  228-0320 [2] CYLINDER GROUP (ANGLE)  
  5P-2506 [1] LITERATURE GROUP  
  107-8126 [2] BEARING  
  109-0959 [4] RING (INTO C-FRAME MOUNTING BORE IN MAIN FRAME)  
 

#XEBP85070534
 

223-6304: BULLDOZER ARRANGEMENT

BULLDOZER ARRANGEMENT (2236304 N/S)-POWER ANGLE AND TILT
EFFECTIVE WITH SERIAL NO. CCS00001-
AN ATTACHMENT
XEBP85070534 XEBP8507
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-3269 [2] CYLINDER GROUP (LIFT)  
  112-3447 [1] ANGLE AND TILT LINES GROUP  
  112-7443 [1] C-FRAME GROUP  
  112-7446 [1] ANGLING BLADE GROUP  
  134-6775 [1] PIN GROUP  
  160-0054 [1] CYLINDER GROUP (TILT)  
  190-5328 [1] LINK GROUP  
  220-0897 [1] LIFT CYLINDER LINES GROUP  
  228-0320 [2] CYLINDER GROUP (ANGLE)  
  5P-2506 [1] LITERATURE GROUP  
  107-8126 [2] BEARING  
  109-0959 [4] RING (INTO C-FRAME MOUNTING BORE IN MAIN FRAME)  
 

#XEBP85070535
 

126-1150: STRAIGHT BULLDOZER ARRANGEMENT

STRAIGHT BULLDOZER ARRANGEMENT (1261150 N/S)-LGP BASIC
EFFECTIVE WITH SERIAL NO. CCS00001-
AN ATTACHMENT
XEBP85070535 XEBP8507
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  127-4116 [2] STRAIGHT BLADE GROUP  
  [1] PUSH ARM GROUP  
  [1] BULLDOZER TRUNNION GROUP  
  127-4128 [1] TILT CYLINDER LINES GROUP  
  5P-2506 [1] LITERATURE GROUP  
 

#XEBP85070536
 

127-4136: BULLDOZER TRUNNION GROUP

BULLDOZER TRUNNION GROUP (1274136 N/S)
EFFECTIVE WITH SERIAL NO. CCS00001-
PART OF 1261150-Page 458
AN ATTACHMENT
j143429 XEBP8507
1274136 BULLDOZER TRUNNION GROUP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1979 [2] SEAL  
2. 7X-2569 [20] BOLT (M20X2.5)  
3. 8T-4123 [20] WASHER  
4. 127-4138 [2] TRUNNION AS  
5. [2] COVER  
6. 8T-4139 [4] BOLT (M12X1.75)  
7. 8T-4223 [4] WASHER  
 

#XEBP85070537
 

127-4123: PUSH ARM GROUP

PUSH ARM GROUP (1274123 N/S)
EFFECTIVE WITH SERIAL NO. CCS00001-
PART OF 1261150-Page 458
REFERENCE: 1153523-Page 453
AN ATTACHMENT
j125604 XEBP8507
1274123 PUSH ARM GROUP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-6306 [2] CAP  
2. 8T-6381 [12] BOLT (M20X2.5)  
3. 127-4131 [12] NUT (M20X2.5)  
4. 127-4135 [1] ARM AS (RH)  
5. 3G-6424 [1] BEARING  
6. 9W-2579 [2] PLATE  
7. 3G-6313 [1] BEARING  
8. 127-4124 [1] ARM AS (LH)  
9. 3G-6424 [1] BEARING  
10. 9W-2579 [2] PLATE  
11. 3G-6313 [1] BEARING  
12. 8E-5703 B [48] SHIM (0.8mm THICK)  
13. 7X-2566 [8] BOLT (M20X2.5)  
14. 4F-0255 [4] PIN  
  3B-4626 [4] COTTER  
15. 4J-3583 [1] SCREW (2 1/4-6)  
16. 8C-8478 [4] BOLT (M20X2.5)  
17. 8J-2880 [1] CAP  
18. 8T-4123 [8] WASHER  
19. 8T-4122 [8] WASHER  
20. 4J-0121 [2] CAP  
21. 8T-4131 [4] NUT (M20X2.5)  
22. 127-4133 [2] CAP  
23. 3F-4956 B [14] SHIM (0.8mm THICK)  
24. 2B-7408 [4] PLUG  
25. 128-5201 [2] ARM AS  
  4J-2000 [1] BALL STUD  
  127-4133 [1] CAP  
26. 8T-4175 [4] BOLT (M16X2)  
27. 8T-4132 [4] NUT (M16X2)  
28. 2J-6118 [2] SCREW (2 3/4-4)  
29. 3F-4971 [2] PIN  
30. [2] PIN (LARGE)  
31. 128-5557 [1] BRACE AS  
  3F-4854 [1] KNOB  
32. 6F-3908 [1] HANDLE AS  
  8J-4866 [1] LUG  
33. 3B-8489 [2] FITTING  
34. 4T-6702 [1] SCREW (2 1/4-6)  
35. 8E-5701 B [52] SHIM (0.8mm THICK)  
36. 115-3523 Y [1] TILT CYLINDER GROUP  
  B   USE AS REQUIRED
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP85070538
 

110-5226: C-FRAME GROUP

C-FRAME GROUP (1105226 N/S)
EFFECTIVE WITH SERIAL NO. CBL00001-
PART OF 2236303-Page 457
AN ATTACHMENT
j141753 XEBP8507
1105226 C-FRAME GROUP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4Y-4905 B [8] WASHER  
2. 7Y-5235 [4] BOLT (M24X3)  
3. 8G-5747 [4] SPACER  
4. 8T-1482 [4] WASHER  
5. 089-8249 [2] SPACER  
6. 104-4817 [1] PIN  
7. 104-7391 [1] CAP  
8. 104-7434 [1] RETAINER  
9. 105-2058 [1] BRACKET AS  
10. 110-5217 [2] PLATE  
11. 110-5218 [2] PLATE  
12. 124-5233 [2] PIN  
13. 124-5234 [2] RETAINER  
14. 124-5235 [6] SHIM  
15. 124-5741 [2] PIN  
16. 145-0803 [1] PIN  
17. 160-5691 [1] PIN  
18. 161-2113 [1] SPACER  
19. [8] WASHER  
20. 104-4746 [2] DOWEL  
21. 108-5794 [4] PLUG  
22. 109-0958 [2] PIN  
23. 7X-2562 [5] BOLT (M20X2.5)  
24. 8T-4123 [3] WASHER  
25. 8T-4139 [6] BOLT (M12X1.75)  
26. 8T-4223 [2] WASHER  
27. 8T-5041 [2] BOLT (M12X1.75)  
28. 200-2649 [1] C-FRAME AS  
  9R-2640 [1] BOSS (M12X1.75) (WELD)  
  9R-3572 [1] BOSS (M12X1.75) (WELD)  
29. 8P-9770 [1] PLATE  
30. 108-8268 [2] BRACKET  
31. 145-0804 [1] SLEEVE  
  B   USE AS REQUIRED
 

#XEBP85070539
 

112-7443: C-FRAME GROUP

C-FRAME GROUP (1127443 N/S)
EFFECTIVE WITH SERIAL NO. CCS00001-
PART OF 2236304-Page 457
AN ATTACHMENT
j141878 XEBP8507
1127443 C-FRAME GROUP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4Y-4905 B [8] WASHER (2mm THICK)  
2. 7Y-5235 [4] BOLT (M24X3)  
3. 8G-5747 [4] SPACER  
4. 8T-1482 [4] WASHER  
5. 089-8249 [2] SPACER  
6. 104-4817 [1] PIN  
7. 104-7391 [1] CAP  
8. 104-7434 [1] RETAINER  
9. 105-2058 [1] BRACKET AS  
10. 110-5217 [2] PLATE  
11. 110-5218 [2] PLATE  
12. 124-5233 [2] PIN  
13. 124-5234 [2] RETAINER  
14. 124-5235 [6] SHIM  
15. 124-5741 [2] PIN  
16. 145-0803 [1] PIN  
17. 160-5691 [1] PIN  
18. 161-2113 [1] SPACER  
19. [8] WASHER (1.6mm THICK)  
20. 104-4746 [2] DOWEL  
21. 108-5794 [4] PLUG  
22. 109-0958 [2] PIN  
23. 7X-2562 [5] BOLT (M20X2.5)  
24. 8T-4123 [3] WASHER  
25. 8T-4139 [6] BOLT (M12X1.75)  
26. 8T-4223 [2] WASHER  
27. 8T-5041 [2] BOLT (M12X1.75)  
28. 200-2636 [1] C-FRAME AS  
  9R-2640 [1] BOSS (M12X1.75) (WELD)  
  9R-3572 [1] BOSS (M12X1.75) (WELD)  
29. 145-0804 [1] SLEEVE  
30. 200-2633 Z [1] TOWER AS (LH)  
31. 8G-2019 [1] HANDLE  
32. 8P-9770 [1] PLATE  
33. 108-8268 [2] BRACKET  
34. 200-2632 Z [1] TOWER AS (RH)  
35. 8G-2019 [1] HANDLE  
  B   USE AS REQUIRED
  Z   NOT SERVICED SEPARATELY
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINK ASSEMBLY ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A 6SU BULLDOZER ARRANGEMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINK ASSEMBLY ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A 6SU BULLDOZER ARRANGEMENT
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Ripper Lift Cylinder
D6N Track-Type Tractor Hydraulic System
Bulldozer Lift Cylinder
D6N Track-Type Tractor Hydraulic System
Bulldozer Tilt Cylinder
D6N Track-Type Tractor Hydraulic System
Bulldozer Angle Cylinder
D6N Track-Type Tractor Hydraulic System
Relief Valve For Rod Ends Of Bulldozer Lift Cylinders
D6N Track-Type Tractor Hydraulic System
Relief Valve For Head and Rod Ends Of Bulldozer Angle Cylinder
D6N Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINK ASSEMBLY ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A 6SU BULLDOZER ARRANGEMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINK ASSEMBLY ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A 6SU BULLDOZER ARRANGEMENT
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINK ASSEMBLY ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A 6SU BULLDOZER ARRANGEMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINK ASSEMBLY ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A 6SU BULLDOZER ARRANGEMENT
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bulldozer Angle Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems
Service Magazine
Improved Protection for Tilt Lines and Angle Lines {5057, 5101}
2007/06/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6N :

CYLINDER GROUP-TILT
115-3523 CYLINDER GROUP-TILT
CYLINDER GROUP-TILT
160-0054 CYLINDER GROUP-TILT
CYLINDER GROUP-LIFT
110-3269 CYLINDER GROUP-LIFT
RIPPER LINES GROUP
180-4561 RIPPER LINES GROUP
RIPPER LINES GROUP
230-8752 RIPPER LINES GROUP
RIPPER LINES GROUP
163-3270 RIPPER LINES GROUP
TILT CYLINDER LINES GROUP
127-4128 TILT CYLINDER LINES GROUP
TILT CYLINDER LINES GROUP
254-7283 TILT CYLINDER LINES GROUP
CYLINDER GROUP-RIPPER LIFT
9T-2716 CYLINDER GROUP-RIPPER LIFT
CYLINDER GROUP-RIPPER LIFT
227-0842 CYLINDER GROUP-RIPPER LIFT
223-6303 BULLDOZER ARRANGEMENT
223-6304 BULLDOZER ARRANGEMENT
126-1150 STRAIGHT BULLDOZER ARRANGEMENT
BULLDOZER TRUNNION GROUP
127-4136 BULLDOZER TRUNNION GROUP
PUSH ARM GROUP
127-4123 PUSH ARM GROUP
C-FRAME GROUP
110-5226 C-FRAME GROUP

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.