BLADE & EDGE 4Z9370 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B 504-9791 Lift Gp(1) 2
OR
504-9793 Lift Gp(2) 2
C 425-0952 Chock 2
(1) High Voltage (480V) Low Voltage (240V)
(2) High Voltage (400V) Low Voltage (200V)Start By:
Remove the transmission guard.
Install the steering frame lock.
Park the machine on a hard, level surface. Engage the parking brake. Install Tooling (C) to prevent the machine from moving.
Illustration 1 g06266280
Typical example
Illustration 2 g06301836
Typical example
Position Tooling (B) to support the front frame as shown. Refer to Tool Operating Manual, NEHS1303 , "Lift Group (Stand - 25 Ton)" for more information on Tooling (B).
Illustration 3 g03876422
Illustration 4 g03876438
Position Tooling (A) under stabilizer rod (3). Use suitable chains to secure Tooling (A) to stabilizer rod (3). The weight of stabilizer rod (3) is approximately 70 kg (150 lb).
Remove nuts (2), the bolts, and the washers that secure stabilizer rod (3) to the frame.
Remove stabilizer rod (3) from the machine.
Note the orientation of the mounting brackets on spherical bearings (4) in relationship to stabilizer rod (3) for installation purposes. Use a suitable press to remove the spherical bearings from the stabilizer rod.Installation Procedure
Install stabilizer rod (3) in the reverse order of removal.