BOLT 0003261 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Accumulated grease and oil on a machine is a fire hazard. Remove this debris with steam cleaning or high pressure water, at least every 1000 hours or each time any significant quantity of oil is spilled on a machine.
Note: For maximum service life of the machine, make a thorough daily inspection before you operate the machine. Inspect the machine for leaks. Remove any debris from the engine compartment and the undercarriage. Ensure that all guards, covers, and caps are secured. Inspect all hoses and belts for damage. Inspect all lights and mirrors for damage. Check the condition of the fan drive belt. Make the needed repairs before you operate the machine.Perform the following procedures on a daily basis.
Operation and Maintenance Manual, "Backup Alarm - Test"
Operation and Maintenance Manual, "Brakes, Indicators, and Gauges - Test"
Operation and Maintenance Manual, "Bulldozer Power Angling Tilt Hinge Pins - Lubricate"
Operation and Maintenance Manual, "Cab Filter (Fresh Air) - Clean/Inpsect/Replace"
Operation and Maintenance Manual, "Cooling System Coolant Level - Check"
Operation and Maintenance Manual, "Engine Oil Level - Check"
Operation and Maintenance Manual, "Fuel System Primary Filter/Water Separator - Drain"
Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain"
Operation and Maintenance Manual, "Hydraulic System Oil Level - Check"
Operation and Maintenance Manual, "Seat Belt - Inspect"
Operation and Maintenance Manual, "Winch Fairlead Rollers - Lubricate"Refer to the Maintenance Section for the detailed procedures. Refer to the Maintenance Interval Schedule for a complete list of scheduled maintenance.