BRACKET 3C8417 - Caterpillar

Illustration 1 g03431970
(1) Tube As Tighten the nuts on the Tube As to the following torque. ... 12 1.5 N m (106 13 lb in) (2) Wastegate Setting of the wastegate ... 144.1 6.9 kPa (21 1 psi) at ... 1 mm lift (3) Nuts for mounting the turbocharger Apply 5P-3931 Anti-Seize Compound (HIGH TEMPERATURE) on the washer face and the threads of the mounting studs for the turbocharger before assembly. Tighten the nuts that hold the turbocharger to the exhaust manifold to the following torque. ... 70 5 N m (52 4 lb ft) (4) Stud Tighten the stud to the following torque. ... 35 5 N m (26 4 lb ft)Note: Install the stud with the stamped letter X showing. (5) V-Band Clamps Tighten the v-band clamps to the following torque. ... 18.1 N m (160 lb in)
Loosen the v-band clamps to the following torque. ... 5.6 N m (50 lb in)
Retighten the v-band clamps to the following torque. ... 13.6 1.2 N m (120 11 lb in)