BUCKET GP 2389496 - Caterpillar

Illustration 1 g02599199
Right side view
Table 1
Specification for 220-6372 Exhaust Manifold Gp
Item Qty Part Specification Description
1 1 336-7595 Exhaust Manifold Before you apply sealant, the male end and the female end of the exhaust manifold must be free from the following substance: dirt, rust, grease, and oil. Apply a thin coat of 3M sealer EC - 1137 to the outside diameter and inside diameter of the exhaust manifolds. Remove excess sealer from the assembled joint.
2 2 133-3359 Exhaust Manifold
Illustration 2 g02599200
Illustration 3 g02724010
Tightening sequence
Table 2
Specification for 220-6372 Exhaust Manifold Gp
Item Qty Part Specification Description
3 4 357-0351 Taperlock Stud Torque to 35 5 N m (26 4 lb ft).
4 12 106-1792 Taperlock Stud Torque to 35 5 N m (26 4 lb ft).
5 12 2N-2766 Locknut Apply Loctite C5A copper anti-seize to the threads and to the bearing surfaces.
Tighten the locknuts in the numerical sequence that is shown in Illustration 3 to 20 3 N m (177 27 lb in).
Again tighten the locknuts in the numerical sequence that is shown in Illustration 3 to 50 5 N m (37 4 lb ft)