CONNECTOR 8T0076 - Caterpillar

Introduction
This Special Instruction contains the necessary procedures and information for the repair of a 3306 engine after a cylinder head gasket failure. Proper repair procedures will increase the longevity of a head to block joint repair. The omission of any of the steps from the procedure could reduce the useful service life of the new cylinder head gasket.In addition to the steps outlined in this special instruction, correct calibration and operation of other components/systems should be verified. These can include:* Ether Starting Aids* Timing Advance* Governor Rack/Torque Settings* Water Pump Output/Thermostat Operation* Radiator/Oil Cooler Flow - Winter Fronts* Intake/Exhaust System Restriction LevelsThese components affect the cylinder pressure and thermal stress to which the head gasket is subjected. Improper calibration and operation will adversely affect the life of the head to block joint repair. Refer to the service manual for operations not covered in this special instruction. Refer to the guidelines for reusable parts for other criteria on component reuse not covered in this publication.Combustion Gas Leakage Tests
Coolant loss and aeration can be caused by reasons other than combustion gas leakage past the head gasket fire ring seal.Air can enter the system by: Filling the system improperly.Allowing